ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 06:57:57 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
34d2964554
openwrt/target/linux/generic/backport-6.1/795-v6.6-09-r8152-set-bp-in-bulk.patch
Marty Jones 34d2964554 kernel: backport fixes for realtek r8152 
Fixes issues with RTL8156 2.5G USB adapters

- # ethtool eth1
Settings for eth1:
        Supported ports: [ ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 2500Mb/s
        Duplex: Half
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        MDI-X: Unknown
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes
- #

- r8152: break the loop when the budget is exhausted
- r8152: Block future register access if register access fails
- r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
- r8152: add vendor/device ID pair for D-Link DUB-E250
- r8152: try to use a normal budget
- r8152: set bp in bulk
- r8152: adjust generic_ocp_write function
- r8152: fix the autosuspend doesn't work
- r8152: Add __GFP_NOWARN to big allocations
- r8152: reduce the control transfer of rtl8152_get_version()
- r8152: remove rtl_vendor_mode function
- r8152: avoid to change cfg for all devices
- r8152: add USB device driver for config selection
- r8152: use napi_gro_frags
- cdc_ether: no need to blacklist any r8152 devices
- cdc_ether: add u-blox 0x1313 composition

Build system: x86_64
Build-tested: bcm2711, rockchip, x86/64
Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64

Signed-off-by: Marty Jones <mj8263788@gmail.com>
2023-12-02 21:57:38 +01:00

130 lines
4.0 KiB
Diff
Raw Blame History

From e5c266a61186b462c388c53a3564c375e72f2244 Mon Sep 17 00:00:00 2001
From: Hayes Wang <hayeswang@realtek.com>
Date: Wed, 26 Jul 2023 11:08:08 +0800
Subject: [PATCH] r8152: set bp in bulk
PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we
could combine the control transfers into one control transfer.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/usb/r8152.c | 75 ++++++++++++++---------------------------
1 file changed, 25 insertions(+), 50 deletions(-)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3984,29 +3984,10 @@ static void rtl_reset_bmu(struct r8152 *
/* Clear the bp to stop the firmware before loading a new one */
static void rtl_clear_bp(struct r8152 *tp, u16 type)
{
- switch (tp->version) {
- case RTL_VER_01:
- case RTL_VER_02:
- case RTL_VER_07:
- break;
- case RTL_VER_03:
- case RTL_VER_04:
- case RTL_VER_05:
- case RTL_VER_06:
- ocp_write_byte(tp, type, PLA_BP_EN, 0);
- break;
- case RTL_VER_14:
- ocp_write_word(tp, type, USB_BP2_EN, 0);
+ u16 bp[16] = {0};
+ u16 bp_num;
- ocp_write_word(tp, type, USB_BP_8, 0);
- ocp_write_word(tp, type, USB_BP_9, 0);
- ocp_write_word(tp, type, USB_BP_10, 0);
- ocp_write_word(tp, type, USB_BP_11, 0);
- ocp_write_word(tp, type, USB_BP_12, 0);
- ocp_write_word(tp, type, USB_BP_13, 0);
- ocp_write_word(tp, type, USB_BP_14, 0);
- ocp_write_word(tp, type, USB_BP_15, 0);
- break;
+ switch (tp->version) {
case RTL_VER_08:
case RTL_VER_09:
case RTL_VER_10:
@@ -4014,32 +3995,31 @@ static void rtl_clear_bp(struct r8152 *t
case RTL_VER_12:
case RTL_VER_13:
case RTL_VER_15:
- default:
if (type == MCU_TYPE_USB) {
ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
-
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
- ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
- } else {
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+ bp_num = 16;
+ break;
}
+ fallthrough;
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ ocp_write_byte(tp, type, PLA_BP_EN, 0);
+ fallthrough;
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_07:
+ bp_num = 8;
+ break;
+ case RTL_VER_14:
+ default:
+ ocp_write_word(tp, type, USB_BP2_EN, 0);
+ bp_num = 16;
break;
}
- ocp_write_word(tp, type, PLA_BP_0, 0);
- ocp_write_word(tp, type, PLA_BP_1, 0);
- ocp_write_word(tp, type, PLA_BP_2, 0);
- ocp_write_word(tp, type, PLA_BP_3, 0);
- ocp_write_word(tp, type, PLA_BP_4, 0);
- ocp_write_word(tp, type, PLA_BP_5, 0);
- ocp_write_word(tp, type, PLA_BP_6, 0);
- ocp_write_word(tp, type, PLA_BP_7, 0);
+ generic_ocp_write(tp, PLA_BP_0, BYTE_EN_DWORD, bp_num << 1, bp, type);
/* wait 3 ms to make sure the firmware is stopped */
usleep_range(3000, 6000);
@@ -5016,10 +4996,9 @@ static void rtl8152_fw_phy_nc_apply(stru
static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
{
- u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
+ u16 bp_en_addr, type, fw_ver_reg;
u32 length;
u8 *data;
- int i;
switch (__le32_to_cpu(mac->blk_hdr.type)) {
case RTL_FW_PLA:
@@ -5061,12 +5040,8 @@ static void rtl8152_fw_mac_apply(struct
ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
__le16_to_cpu(mac->bp_ba_value));
- bp_index = __le16_to_cpu(mac->bp_start);
- bp_num = __le16_to_cpu(mac->bp_num);
- for (i = 0; i < bp_num; i++) {
- ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
- bp_index += 2;
- }
+ generic_ocp_write(tp, __le16_to_cpu(mac->bp_start), BYTE_EN_DWORD,
+ __le16_to_cpu(mac->bp_num) << 1, mac->bp, type);
bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
if (bp_en_addr)
Reference in New Issue View Git Blame Copy Permalink