openwrt/target/linux/ramips/dts/mt7621_keenetic_kn-3510.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	compatible = "keenetic,kn-3510", "mediatek,mt7621-soc";
	model = "Keenetic KN-3510";

	aliases {
		led-boot = &led_status_green;
		led-failsafe = &led_status_green;
		led-running = &led_status_green;
		led-upgrade = &led_status_green;
		label-mac-device = &gmac0;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			function = LED_FUNCTION_WPS;
			color = <LED_COLOR_ID_AMBER>;
			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
		};

		led_status_green: led-1 {
			function = LED_FUNCTION_STATUS;
			color = <LED_COLOR_ID_GREEN>;
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		fn1 {
			label = "fn1";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_0>;
		};
	};

	virtual_flash {
		compatible = "mtd-concat";
		devices = <&firmware1 &storage1 &firmware2 &storage2>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "kernel";
				reg = <0x0 0x400000>;
			};

			partition@400000 {
				label = "ubi";
				reg = <0x400000 0x0>;
			};
		};
	};
};

&state_default {
	gpio {
		groups = "uart3", "jtag";
		function = "gpio";
	};
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x80000>;
			read-only;
		};

		partition@80000 {
			label = "u-config";
			reg = <0x80000 0x80000>;
			read-only;
		};

		partition@100000 {
			label = "rf-eeprom";
			reg = <0x100000 0x80000>;
			read-only;

			nvmem-layout {
				compatible = "fixed-layout";
				#address-cells = <1>;
				#size-cells = <1>;

				eeprom_factory_0: eeprom@0 {
					reg = <0x0 0xe00>;
				};

				macaddr_factory_4: macaddr@4 {
					reg = <0x4 0x6>;
				};

				macaddr_factory_a: macaddr@a {
					reg = <0xa 0x6>;
				};

				precal_factory_e10: precal@e10 {
					reg = <0xe10 0x19c10>;
				};
			};
		};

		firmware1: partition@180000 {
			label = "firmware_1";
			reg = <0x180000 0x1a40000>;
		};

		partition@1bc0000 {
			label = "config_1";
			reg = <0x1bc0000 0x20000>;
			read-only;
		};

		partition@1dc0000 {
			label = "storage_legacy";
			reg = <0x1dc0000 0x20000>;
			read-only;
		};

		partition@1fc0000 {
			label = "dump";
			reg = <0x1fc0000 0x40000>;
			read-only;
		};

		storage1: partition@2000000 {
			label = "storage_a";
			reg = <0x2000000 0x1fc0000>;
		};

		partition@3fc0000 {
			label = "u-state";
			reg = <0x3fc0000 0x80000>;
			read-only;
		};

		partition@4040000 {
			label = "u-config_res";
			reg = <0x4040000 0x80000>;
			read-only;
		};

		partition@40c0000 {
			label = "rf-eeprom_res";
			reg = <0x40c0000 0x80000>;
			read-only;
		};

		firmware2: partition@4140000 {
			label = "firmware_2";
			reg = <0x4140000 0x1a40000>;
		};

		partition@5b80000 {
			label = "config_2";
			reg = <0x5d00000 0x20000>;
			read-only;
		};

		storage2: partition@5d80000 {
			label = "storage_b";
			reg = <0x5d80000 0x2200000>;
		};
	};
};

&ethphy0 {
	/delete-property/ interrupts;
};

&gmac0 {
	nvmem-cells = <&macaddr_factory_4>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	status = "okay";
	label = "wan";
	phy-handle = <&ethphy0>;

	nvmem-cells = <&macaddr_factory_a>;
	nvmem-cell-names = "mac-address";
};

&switch0 {
	ports {
		port@3 {
			status = "okay";
			label = "lan";
		};
	};
};

&pcie {
	status = "okay";
};

&pcie1 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_factory_0>, <&precal_factory_e10>;
		nvmem-cell-names = "eeprom", "precal";
		mediatek,disable-radar-background;
	};
};

&xhci {
	status = "disabled";
};