mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
d2c9b169b3
jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 2x 10/100/1000 Mbps Ethernet - 128 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm - 3x MMCX connectors - power input: 802.3at PoE or wide range DC (36-57 V) - optional 802.3af PSE - 1x mini-PCIe connector with PCIe, USB buses and SIM slot - 1x mini-PCIe connector with PCIe bus - 1x USB type-A connector - 6x LED, 1x button (hardware reset) - RS232 (MAX3223) and (E)JTAG headers Default configuration: - WAN on eth1 (RJ45 near LEDs with PoE input) - LAN on eth0 (RJ45 near DC jack) - left top LED set to be status LED - all LEDs configurable form user space Flash instruction (do it under U-Boot, using RS232): 1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
159 lines
4.1 KiB
C
159 lines
4.1 KiB
C
/*
|
|
* jjPlus JWAP230 board support
|
|
*
|
|
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ath79.h>
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
|
|
#define JWAP230_GPIO_LED_LED1 23
|
|
#define JWAP230_GPIO_LED_LED2 22
|
|
#define JWAP230_GPIO_LED_LED3 21
|
|
|
|
#define JWAP230_MAC0_OFFSET 0x0
|
|
#define JWAP230_MAC1_OFFSET 0x6
|
|
#define JWAP230_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led jwap230_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "jwap230:green:led1",
|
|
.gpio = JWAP230_GPIO_LED_LED1,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "jwap230:green:led2",
|
|
.gpio = JWAP230_GPIO_LED_LED2,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "jwap230:green:led3",
|
|
.gpio = JWAP230_GPIO_LED_LED3,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static const struct ar8327_led_info jwap230_leds_qca8337[] = {
|
|
AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"),
|
|
AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"),
|
|
};
|
|
|
|
/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
|
|
static struct ar8327_led_cfg jwap230_qca8337_led_cfg = {
|
|
.led_ctrl0 = 0xcf37cf37,
|
|
.led_ctrl1 = 0xcf37cf37,
|
|
.led_ctrl2 = 0xcf37cf37,
|
|
.led_ctrl3 = 0x0,
|
|
.open_drain = true,
|
|
};
|
|
|
|
/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */
|
|
static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_RGMII,
|
|
.txclk_delay_en = true,
|
|
.rxclk_delay_en = true,
|
|
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
|
|
.mac06_exchange_dis = true,
|
|
};
|
|
|
|
/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */
|
|
static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
|
|
};
|
|
|
|
static struct ar8327_platform_data jwap230_qca8337_data = {
|
|
.pad0_cfg = &jwap230_qca8337_pad0_cfg,
|
|
.pad6_cfg = &jwap230_qca8337_pad6_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.port6_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
.led_cfg = &jwap230_qca8337_led_cfg,
|
|
.num_leds = ARRAY_SIZE(jwap230_leds_qca8337),
|
|
.leds = jwap230_leds_qca8337,
|
|
};
|
|
|
|
static struct mdio_board_info jwap230_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &jwap230_qca8337_data,
|
|
},
|
|
};
|
|
|
|
static void __init jwap230_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio),
|
|
jwap230_leds_gpio);
|
|
|
|
mdiobus_register_board_info(jwap230_mdio0_info,
|
|
ARRAY_SIZE(jwap230_mdio0_info));
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
|
|
|
/* QCA9558 GMAC0 is connected to RMGII interface */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0xa6000000;
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0);
|
|
ath79_register_eth(0);
|
|
|
|
/* QCA9558 GMAC1 is connected to SGMII interface */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
|
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0);
|
|
ath79_register_eth(1);
|
|
|
|
ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL);
|
|
|
|
ath79_register_pci();
|
|
ath79_register_usb();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup);
|