openwrt/package/boot/uboot-envtools/files
Shymon Samsel 4b6e7da0f7 ipq807x: add support for TP-Link EAP620 HD v1
Specifications:
  * SoC: Qualcomm IPQ8072A (64-bit Quad-core Arm Cortex-A53 @ 1.4 GHz)
  * Memory: 2x ESMT M15T4G16256A-DEBG2G (1 GiB DDR3-1866 13-13-13)
  * Serial Port: 3v3 TTL 115200n8
  * Wi-Fi: QCA5054 (4x4 5 GHz 802.11ax)
  * Wi-Fi: QCN5024 (2x2 2.4 GHz 802.11b/g/n/ax)
  * Ethernet: AR8031 (10/100/1000BASE-T)
  * Flash: Winbond W29N01HZSINF (128 MiB)
  * LEDs: 1x Blue Status (GPIO 42 Active High)
  * Buttons: 1x Reset (GPIO 50 Active Low)

Installation Instructions (Serial+TFTP):
  1. Solder 4 pin header to JP1 and bridge pads of R58 and R62.
  2. Connect 3V3 TTL port to TX, RX, and GND, which are positions 1, 2, and 3 respectively.
     Be sure to crossover TX and RX.
  3. Copy RAM firmware
     openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-initramfs-uImage.itb
     to a TFTP server's root that is in the same subnet as your AP.
  4. Power up the AP hold Ctrl+B in the serial console (115200n8) until autoboot is halted.
  5. Run the following commands in the U-boot prompt:
     # setenv serverip <TFTP server addr>
     # setenv ipaddr <addr of AP>
     # tftpboot 0x44000000 openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-initramfs-uImage.itb
     # bootm
     You may need to type Ctrl+C and Enter before running these commands
     to clear invisible characters from the buffer.
  6. Run the following command in a terminal to copy the sysupgrade image
     to be installed (check IP address):
     $ scp -O openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
  7. Activate the OpenWrt serial console and run the following commands:
     # cd /tmp
     # sysupgrade -n openwrt-qualcommax-ipq807x-tplink_eap620hd-v1-squashfs-sysupgrade.bin
  8. The AP will reboot and OpenWrt will be successfully installed.

Known Issues:
  * 5GHz radio instability (upstream current ath11k build bug maybe?)

Device support directly followed from EAP660HDv1 support
Links: #15832

Signed-off-by: Shymon Samsel <ssamsel@umass.edu>
Link: https://github.com/openwrt/openwrt/pull/17254
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-12-22 11:36:23 +01:00
..
apm821xx apm821xx: prepare WNDR4700 for 6.6 - add preliminary u-boot-env access 2024-04-05 09:26:26 +02:00
ath79 ath79: Add support for Sophos AP15C 2024-11-09 03:21:36 +01:00
cns3xxx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
fw_defaults uboot-envtools: add a board.d script to load defaults from the environment 2024-10-02 15:41:33 +02:00
fw_loadenv uboot-envtools: add fw_loadenv tool 2024-10-02 15:41:33 +02:00
fw_printsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
fw_setsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
imx_cortexa7 uboot-envtools: imx: cortexa7: add TechNexion PICO-PI-IMX7D 2022-07-11 14:28:03 +02:00
imx_cortexa9 uboot-envtools: move imx to imx_cortexa9 2021-11-03 12:45:40 +01:00
ipq40xx ipq40xx: add support for Linksys WHW03 V1 2024-05-05 10:33:13 +02:00
ipq806x ipq806x: add support for Extreme Networks AP3935 2023-10-05 00:56:57 +02:00
kirkwood kirkwood: add D-Link DNS-320L support 2024-06-01 01:29:09 +02:00
lantiq uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
layerscape layerscape: remove Traverse LS1043 boards 2023-07-01 15:47:08 +02:00
mediatek_filogic mediatek: filogic: add support for NRadio C8-668GL 2024-12-13 15:29:04 +01:00
mediatek_mt7622 uboot-envtools: add u-boot system env config for Xiaomi Redmi AX6S 2024-09-06 23:40:04 +02:00
mediatek_mt7623 uboot-envtools: replace use of platform_get_bootdev 2024-02-26 01:29:22 +00:00
mediatek_mt7629 mediatek: Add support for Linksys EA7500 v3 2024-08-15 00:13:20 +02:00
mpc85xx mpc85xx: add support for Enterasys WS-AP3715i 2023-04-08 14:41:01 +02:00
mvebu uboot-envtools: add settings for Synology DS213j 2023-11-20 13:40:17 +00:00
mxs uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
octeon octeon: n821: add Cisco vEdge 1000 base 2023-07-15 17:05:58 +02:00
oxnas uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20 2022-03-21 20:16:16 +00:00
pistachio uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
qoriq qoriq: add support for WatchGuard Firebox M300 2021-12-21 21:37:46 +02:00
qualcommax_ipq60xx qualcommax: ipq60xx: add Linksys MR7350 support 2024-12-07 16:00:58 +01:00
qualcommax_ipq807x ipq807x: add support for TP-Link EAP620 HD v1 2024-12-22 11:36:23 +01:00
ramips ramips: add support for ASUS 4G-AX56 2024-12-13 15:29:04 +01:00
realtek uboot-envtools: add support for APRESIA ApresiaLightGS120GT-SS 2023-02-13 12:22:17 +01:00
rockchip_armv8 uboot-envtools: Add support for Orange Pi R1 Plus & LTS 2024-08-12 21:00:36 +02:00
uboot-envtools.sh uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00