openwrt/target/linux/ramips/dts/AR670W.dts

/dts-v1/;

#include "rt2880.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "airlink101,ar670w", "ralink,rt2880-soc";
	model = "Airlink101 AR670W";

	aliases {
		led-status = &led_power;
	};

	cfi@bdc00000 {
		compatible = "cfi-flash";
		reg = <0xbc400000 0x800000>;
		bank-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;

		u-boot@0 {
			reg = <0x0 0x30000>;
			label = "u-boot";
			read-only;
		};

		factory: factory@30000 {
			reg = <0x30000 0x10000>;
			label = "factory";
			read-only;
		};

		firmware@40000 {
			reg = <0x40000 0x3c0000>;
			label = "firmware";
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		led_power: power {
			label = "ar670w:green:power";
			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
		};

		wpsblue {
			label = "ar670w:blue:wps";
			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;

		wps {
			label = "wps";
			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		reset {
			label = "reset";
			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&gpio0 {
	status = "okay";
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "i2c", "spi", "uartlite";
			ralink,function = "gpio";
		};
	};
};

&ethernet {
	status = "okay";
	mtd-mac-address = <&factory 0x2004>;

	port@0 {
		phy-handle = <&phy0>;
		phy-mode = "mii";
	};

	mdio-bus {
		status = "okay";

		phy0: ethernet-phy@0 {
			phy-mode = "mii";
			reg = <0>;
		};
	};
};

&wmac {
	status = "okay";
	ralink,mtd-eeprom = <&factory 0x2000>;
};