mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
a873b29284
Specifications: SOC: Qualcomm IPQ4018 RAM: 256 MiB Samsung K4B2G1646F-BYK0 FLASH1: MX25L1605D 2 MB FLASH2: Winbond W25N01GV 128Mb ETH: Qualcomm QCA8075 WLAN0: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN1: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2 INPUT: WPS, Reset LED: Status - Green SERIAL: Header at J19, Beneath DC Power Jack 1-VCC ; 2-TX ; 3-RX; 4-GND; Serial 115200-8-N-1. Tested and working: - USB (requires extra packages) - LAN Ethernet (Correct MAC-address) - WAN Ethernet (Correct MAC-address) - 2.4 GHz WiFi (Correct MAC-address) - 5 GHz WiFi (Correct MAC-address) - Factory installation from Web UI - OpenWRT sysupgrade - LED - Reset Button Need Testing: - WPS button Install via Web UI: - Attach to a LAN port on the router. - Connect to the Linksys Smart WiFi Page (default 192.168.1.1) and login - Select the connectivity tab on the left - In the manual update box on the right - Select browse, and browse to openwrt-ipq40xx-linksys_ea6350v3-squashfs-factory.bin - Click update. - Read and accept the warning - The router LED will start blinking. When the router LED goes solid, you can now navigate to 192.168.1.1 to your new OpenWrt installation. Sysupgrade: - Flash the sysupgrade image as usual. Please: try to do a reset everytime you can (doing it with LuCI is easy and can be done in the same step). Recovery (Automatic): - If the device fails to boot after install or upgrade, whilst the unit is turned on: 1 - Wait 15 seconds 2 - Switch Off and Wait 10 seconds 3 - Switch on 4 - Repeat steps 1 to 3, 3 times then go to 5. 5 - U-boot will have now erased the failed update and switched back to the last working firmware - you should be able to access your router on LAN. Recovery (Manual): - The steps for manual recovery are the same as the generic u-boot tftp client method. Back To Stock: - Use the generic recovery using the tftp client method to flash the "civic.img". Also you can strip-and-pad the original image and use the generic "mtd" method by flashing over the "kernel" partition. * Just be careful to flash in the partition that the device is currently booted. Signed-off-by: Ryan Pannell <ryan@osukl.com> Signed-off-by: Oever González <notengobattery@gmail.com> [minor edits, removed second compatible of nand, added dtb entry to 4.19] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> |
||
---|---|---|
.. | ||
030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch | ||
031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch | ||
040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch | ||
050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch | ||
050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch | ||
050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch | ||
050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch | ||
070-qcom-spm-fix-probe-order.patch | ||
071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch | ||
072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch | ||
073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch | ||
074-ARM-qcom-Add-IPQ4019-SoC-support.patch | ||
075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch | ||
076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch | ||
077-qcom-ipq4019-add-USB-devicetree-nodes.patch | ||
078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch | ||
079-ARM-dts-ipq4019-fix-PCI-range.patch | ||
080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch | ||
081-clk-fix-apss-cpu-overclocking.patch | ||
082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch | ||
083-mtd-nand-add-Winbond-manufacturer-and-chip.patch | ||
084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch | ||
303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch | ||
700-net-add-qualcomm-mdio-and-phy.patch | ||
701-dts-ipq4019-add-mdio-node.patch | ||
702-dts-ipq4019-add-PHY-switch-nodes.patch | ||
703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch | ||
710-net-add-qualcomm-essedma-ethernet-driver.patch | ||
711-dts-ipq4019-add-ethernet-essedma-node.patch | ||
712-mr33-essedma.patch | ||
713-essedma-alloc-skb-ip-align.patch | ||
850-soc-add-qualcomm-syscon.patch | ||
900-dts-ipq4019-ap-dk01.1.patch | ||
901-arm-boot-add-dts-files.patch | ||
997-device_tree_cmdline.patch |