openwrt/target/linux/malta
Rui Salvaterra 3326b5e75c treewide: switch the timer frequency to 100 Hz
Some targets select HZ=100, others HZ=250. There's no reason to select a higher
timer frequency (and 100 Hz are available in every architecture), so change all
targets to 100 Hz.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-04-21 10:31:10 +01:00
..
base-files/etc treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
be malta: prune subtarget configs 2021-03-17 15:35:33 +01:00
be64 malta: prune subtarget configs 2021-03-17 15:35:33 +01:00
image target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
le malta: prune subtarget configs 2021-03-17 15:35:33 +01:00
le64 malta: prune subtarget configs 2021-03-17 15:35:33 +01:00
config-5.4 treewide: switch the timer frequency to 100 Hz 2021-04-21 10:31:10 +01:00
config-5.10 treewide: switch the timer frequency to 100 Hz 2021-04-21 10:31:10 +01:00
Makefile malta: support kernel 5.10 2021-03-17 15:35:33 +01:00
README malta: update MIPS64 ISA to R2 2020-10-11 16:16:24 +02:00

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the 32 bit little-endian image:
qemu-system-mipsel -kernel bin/targets/malta/le/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the 32 bit big-endian image:
qemu-system-mips -kernel bin/targets/malta/be/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit little-endian image:
qemu-system-mips64el -kernel bin/targets/malta/le64/openwrt-malta-le64-vmlinux-initramfs.elf -cpu MIPS64R2-generic -nographic -m 256

For the 64 bit big-endian image:
qemu-system-mips64 -kernel bin/targets/malta/be64/openwrt-malta-be64-vmlinux-initramfs.elf -cpu MIPS64R2-generic -nographic -m 256

and enjoy the system bootin.