openwrt/target/linux
Roman Kuzmitskii 32f9a0945f ath79: add support for Ubiquiti airCube AC
The Ubiquiti Network airCube AC is a cube shaped device supporting
2.4 GHz and 5 GHz with internal 2x2 MIMO antennas.
It can be powered with either one of:
 - 24v power supply with 3.0mm x 1.0mm barrel plug
 - 24v passive PoE on first LAN port
There are four 10/100/1000 Mbps ports (1 * WAN + 3 * LAN).
First LAN port have optional PoE passthrough to the WAN port.

SoC:       Qualcomm / Atheros AR9342
RAM:       64 MB DDR2
Flash:     16 MB SPI NOR
Ethernet:  4x 10/100/1000 Mbps (1 WAN + 3 LAN)
LEDS:      1x via a SPI controller (not yet supported)
Buttons:   1x Reset
Serial:    1x (only RX and TX); 115200 baud, 8N1

Missing features:
 - LED control is not supported

Physical to internal switch port mapping:
 - physical port #1 (poe in) = switchport 2
 - physical port #2 = switchport 3
 - physical port #3 = switchport 5
 - physical port #4 (wan/poe out) = switchport 4

Factory update is tested and is the same as for Ubiquiti AirCube ISP
hence the shared configuration between that devices.

Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
Signed-off-by: maurerr <mariusd84@gmail.com>
2021-09-01 08:07:23 +00:00
..
apm821xx kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
arc770 arc770: drop support for kernel 4.14 2021-09-01 08:06:56 +00:00
archs38 treewide: use wpad-basic-wolfssl as default 2021-09-01 08:06:52 +00:00
armvirt armvirt: README: rename it from LEDE to OpenWrt 2021-09-01 08:07:21 +00:00
at91 kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
ath25 ath25: fix preinit Ethernet port configuration 2021-09-01 08:06:58 +00:00
ath79 ath79: add support for Ubiquiti airCube AC 2021-09-01 08:07:23 +00:00
bcm27xx kernel: bump 5.4 to 5.4.85 2021-09-01 08:07:23 +00:00
bcm47xx kernel: bump 5.4 to 5.4.80 2021-09-01 08:07:15 +00:00
bcm53xx kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
bcm63xx kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
gemini kernel: remove support for kernel 4.19 2021-09-01 08:07:08 +00:00
generic kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
imx6 kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
ipq40xx ipq40xx: add support for Plasma Cloud PA2200 2021-09-01 08:07:23 +00:00
ipq806x ipq806x: disable SPC of IPQ8064 on NEC WG2600HP to fix boot issue 2021-09-01 08:07:23 +00:00
ipq807x kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
kirkwood kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
lantiq kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
layerscape kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
malta kernel: remove support for kernel 4.19 2021-09-01 08:07:08 +00:00
mediatek kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
mpc85xx kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
mvebu kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
mxs treewide: make dependency on kmod-usb-net selective 2021-09-01 08:06:49 +00:00
octeon kernel: bump 5.4 to 5.4.75 2021-09-01 08:07:10 +00:00
octeontx kernel: move F2FS_FS_XATTR and F2FS_STAT_FS symbols to generic 2021-09-01 08:07:04 +00:00
omap kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
oxnas kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
pistachio kernel: move some disabled symbols to generic 2021-09-01 08:07:23 +00:00
ramips ramips: add support for Senao Engenius ESR600H 2021-09-01 08:07:23 +00:00
realtek realtek: use kernel defined halt 2021-09-01 08:07:23 +00:00
rockchip kernel: bump 5.4 to 5.4.85 2021-09-01 08:07:23 +00:00
sunxi sunxi: add support for Libre Computer ALL-H3-CC H5 2021-09-01 08:07:11 +00:00
tegra tegra: image: remove unnecessary assumptions from bootscript 2021-09-01 08:07:22 +00:00
uml kernel: bump 5.4 to 5.4.71 2021-09-01 08:07:05 +00:00
x86 x86: enable CONFIG_MMC_SDHCI_ACPI for x86_64 2021-09-01 08:07:16 +00:00
zynq kernel: remove support for kernel 4.19 2021-09-01 08:07:08 +00:00
Makefile build: add 'make kernel_xconfig' command 2020-07-08 16:07:05 +02:00