mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
02629d8f87
Targets were build tested and patches are refreshed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42463
254 lines
5.9 KiB
Diff
254 lines
5.9 KiB
Diff
From 1c6e51ffb10f5bf93a3018c7c1e04d7ed93f944e Mon Sep 17 00:00:00 2001
|
|
From: Kumar Gala <galak@codeaurora.org>
|
|
Date: Fri, 7 Mar 2014 10:56:59 -0600
|
|
Subject: [PATCH 130/182] ARM: qcom: Add initial IPQ8064 SoC and AP148 device
|
|
trees
|
|
|
|
Add basic IPQ8064 SoC include device tree and support for basic booting on
|
|
the AP148 Reference board.
|
|
|
|
Signed-off-by: Kumar Gala <galak@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 25 +++++
|
|
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 1 +
|
|
arch/arm/boot/dts/qcom-ipq8064.dtsi | 176 ++++++++++++++++++++++++++++++
|
|
arch/arm/mach-qcom/board.c | 2 +
|
|
5 files changed, 205 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
|
|
create mode 100644 arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -235,6 +235,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
|
qcom-apq8064-ifc6410.dtb \
|
|
qcom-apq8074-dragonboard.dtb \
|
|
qcom-apq8084-mtp.dtb \
|
|
+ qcom-ipq8064-ap148.dtb \
|
|
qcom-msm8660-surf.dtb \
|
|
qcom-msm8960-cdp.dtb
|
|
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -0,0 +1,25 @@
|
|
+#include "qcom-ipq8064-v1.0.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Qualcomm IPQ8064/AP148";
|
|
+ compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
|
|
+
|
|
+ reserved-memory {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ rsvd@41200000 {
|
|
+ reg = <0x41200000 0x300000>;
|
|
+ no-map;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ gsbi@16300000 {
|
|
+ qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
+ status = "ok";
|
|
+ serial@16340000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
|
|
@@ -0,0 +1 @@
|
|
+#include "qcom-ipq8064.dtsi"
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -0,0 +1,176 @@
|
|
+/dts-v1/;
|
|
+
|
|
+#include "skeleton.dtsi"
|
|
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
|
|
+#include <dt-bindings/soc/qcom,gsbi.h>
|
|
+
|
|
+/ {
|
|
+ model = "Qualcomm IPQ8064";
|
|
+ compatible = "qcom,ipq8064";
|
|
+ interrupt-parent = <&intc>;
|
|
+
|
|
+ cpus {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ cpu@0 {
|
|
+ compatible = "qcom,krait";
|
|
+ enable-method = "qcom,kpss-acc-v1";
|
|
+ device_type = "cpu";
|
|
+ reg = <0>;
|
|
+ next-level-cache = <&L2>;
|
|
+ qcom,acc = <&acc0>;
|
|
+ qcom,saw = <&saw0>;
|
|
+ };
|
|
+
|
|
+ cpu@1 {
|
|
+ compatible = "qcom,krait";
|
|
+ enable-method = "qcom,kpss-acc-v1";
|
|
+ device_type = "cpu";
|
|
+ reg = <1>;
|
|
+ next-level-cache = <&L2>;
|
|
+ qcom,acc = <&acc1>;
|
|
+ qcom,saw = <&saw1>;
|
|
+ };
|
|
+
|
|
+ L2: l2-cache {
|
|
+ compatible = "cache";
|
|
+ cache-level = <2>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ cpu-pmu {
|
|
+ compatible = "qcom,krait-pmu";
|
|
+ interrupts = <1 10 0x304>;
|
|
+ };
|
|
+
|
|
+ reserved-memory {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+
|
|
+ nss@40000000 {
|
|
+ reg = <0x40000000 0x1000000>;
|
|
+ no-map;
|
|
+ };
|
|
+
|
|
+ smem@41000000 {
|
|
+ reg = <0x41000000 0x200000>;
|
|
+ no-map;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ soc: soc {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ compatible = "simple-bus";
|
|
+
|
|
+ qcom_pinmux: pinmux@800000 {
|
|
+ compatible = "qcom,ipq8064-pinctrl";
|
|
+ reg = <0x800000 0x4000>;
|
|
+
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ interrupts = <0 32 0x4>;
|
|
+ };
|
|
+
|
|
+ intc: interrupt-controller@2000000 {
|
|
+ compatible = "qcom,msm-qgic2";
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <3>;
|
|
+ reg = <0x02000000 0x1000>,
|
|
+ <0x02002000 0x1000>;
|
|
+ };
|
|
+
|
|
+ timer@200a000 {
|
|
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
|
|
+ interrupts = <1 1 0x301>,
|
|
+ <1 2 0x301>,
|
|
+ <1 3 0x301>;
|
|
+ reg = <0x0200a000 0x100>;
|
|
+ clock-frequency = <25000000>,
|
|
+ <32768>;
|
|
+ cpu-offset = <0x80000>;
|
|
+ };
|
|
+
|
|
+ acc0: clock-controller@2088000 {
|
|
+ compatible = "qcom,kpss-acc-v1";
|
|
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
|
+ };
|
|
+
|
|
+ acc1: clock-controller@2098000 {
|
|
+ compatible = "qcom,kpss-acc-v1";
|
|
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
|
|
+ };
|
|
+
|
|
+ saw0: regulator@2089000 {
|
|
+ compatible = "qcom,saw2";
|
|
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
|
+ regulator;
|
|
+ };
|
|
+
|
|
+ saw1: regulator@2099000 {
|
|
+ compatible = "qcom,saw2";
|
|
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
|
|
+ regulator;
|
|
+ };
|
|
+
|
|
+ gsbi2: gsbi@12480000 {
|
|
+ compatible = "qcom,gsbi-v1.0.0";
|
|
+ reg = <0x12480000 0x100>;
|
|
+ clocks = <&gcc GSBI2_H_CLK>;
|
|
+ clock-names = "iface";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ status = "disabled";
|
|
+
|
|
+ serial@12490000 {
|
|
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
+ reg = <0x12490000 0x1000>,
|
|
+ <0x12480000 0x1000>;
|
|
+ interrupts = <0 195 0x0>;
|
|
+ clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gsbi4: gsbi@16300000 {
|
|
+ compatible = "qcom,gsbi-v1.0.0";
|
|
+ reg = <0x16300000 0x100>;
|
|
+ clocks = <&gcc GSBI4_H_CLK>;
|
|
+ clock-names = "iface";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ status = "disabled";
|
|
+
|
|
+ serial@16340000 {
|
|
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
+ reg = <0x16340000 0x1000>,
|
|
+ <0x16300000 0x1000>;
|
|
+ interrupts = <0 152 0x0>;
|
|
+ clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ qcom,ssbi@500000 {
|
|
+ compatible = "qcom,ssbi";
|
|
+ reg = <0x00500000 0x1000>;
|
|
+ qcom,controller-type = "pmic-arbiter";
|
|
+ };
|
|
+
|
|
+ gcc: clock-controller@900000 {
|
|
+ compatible = "qcom,gcc-ipq8064";
|
|
+ reg = <0x00900000 0x4000>;
|
|
+ #clock-cells = <1>;
|
|
+ #reset-cells = <1>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- a/arch/arm/mach-qcom/board.c
|
|
+++ b/arch/arm/mach-qcom/board.c
|
|
@@ -18,6 +18,8 @@ static const char * const qcom_dt_match[
|
|
"qcom,apq8064",
|
|
"qcom,apq8074-dragonboard",
|
|
"qcom,apq8084",
|
|
+ "qcom,ipq8062",
|
|
+ "qcom,ipq8064",
|
|
"qcom,msm8660-surf",
|
|
"qcom,msm8960-cdp",
|
|
NULL
|