openwrt/target/linux/generic/patches-2.6.31/941-ssb_update.patch

--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -66,6 +66,20 @@ config SSB_PCMCIAHOST
 
 	  If unsure, say N
 
+config SSB_SDIOHOST_POSSIBLE
+	bool
+	depends on SSB && (MMC = y || MMC = SSB)
+	default y
+
+config SSB_SDIOHOST
+	bool "Support for SSB on SDIO-bus host"
+	depends on SSB_SDIOHOST_POSSIBLE
+	help
+	  Support for a Sonics Silicon Backplane on top
+	  of a SDIO device.
+
+	  If unsure, say N
+
 config SSB_SILENT
 	bool "No SSB kernel messages"
 	depends on SSB && EMBEDDED
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM)			+= sprom.o
 # host support
 ssb-$(CONFIG_SSB_PCIHOST)		+= pci.o pcihost_wrapper.o
 ssb-$(CONFIG_SSB_PCMCIAHOST)		+= pcmcia.o
+ssb-$(CONFIG_SSB_SDIOHOST)		+= sdio.o
 
 # built-in drivers
 ssb-y					+= driver_chipcommon.o
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC,  0x4318) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */
+static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+
+	switch (bus->chip_id) {
+	case 0x4312:
+	case 0x4322:
+	case 0x4328:
+		return 7000;
+	case 0x4325:
+		/* TODO: */
+	default:
+		return 15000;
+	}
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */
 static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
 {
 	struct ssb_bus *bus = cc->dev->bus;
@@ -218,6 +236,12 @@ static void calc_fast_powerup_delay(stru
 
 	if (bus->bustype != SSB_BUSTYPE_PCI)
 		return;
+
+	if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+		cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc);
+		return;
+	}
+
 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL))
 		return;
 
@@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip
 {
 	if (!cc->dev)
 		return; /* We don't have a ChipCommon */
+	if (cc->dev->id.revision >= 11)
+		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+	ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
 	ssb_pmu_init(cc);
 	chipco_powercontrol_init(cc);
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
@@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
 {
 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
 }
+EXPORT_SYMBOL(ssb_chipco_gpio_control);
 
 u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
 {
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
 	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
 }
 
+static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
+				   u32 offset, u32 mask, u32 set)
+{
+	u32 value;
+
+	chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
+	chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
+	chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
+	value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
+	value &= mask;
+	value |= set;
+	chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
+	chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
+}
+
 struct pmu0_plltab_entry {
 	u16 freq;	/* Crystal frequency in kHz.*/
 	u8 xf;		/* Crystal frequency value for PMU control */
@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
 	case 0x5354:
 		ssb_pmu0_pllinit_r0(cc, crystalfreq);
 		break;
+	case 0x4322:
+		if (cc->pmu.rev == 2) {
+			chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
+			chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
+		}
+		break;
 	default:
 		ssb_printk(KERN_ERR PFX
 			   "ERROR: PLL init unknown for device %04X\n",
@@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc
 
 	switch (bus->chip_id) {
 	case 0x4312:
+	case 0x4322:
 		/* We keep the default settings:
 		 * min_msk = 0xCBB
 		 * max_msk = 0x7FFFF
@@ -480,9 +502,9 @@ static void ssb_pmu_resources_init(struc
 		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */
 void ssb_pmu_init(struct ssb_chipcommon *cc)
 {
-	struct ssb_bus *bus = cc->dev->bus;
 	u32 pmucap;
 
 	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
@@ -494,15 +516,91 @@ void ssb_pmu_init(struct ssb_chipcommon
 	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
 		    cc->pmu.rev, pmucap);
 
-	if (cc->pmu.rev >= 1) {
-		if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
-			chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
-				      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
-		} else {
-			chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
-				     SSB_CHIPCO_PMU_CTL_NOILPONW);
-		}
-	}
+	if (cc->pmu.rev == 1)
+		chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
+			      ~SSB_CHIPCO_PMU_CTL_NOILPONW);
+	else
+		chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
+			     SSB_CHIPCO_PMU_CTL_NOILPONW);
 	ssb_pmu_pll_init(cc);
 	ssb_pmu_resources_init(cc);
 }
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+			     enum ssb_pmu_ldo_volt_id id, u32 voltage)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	u32 addr, shift, mask;
+
+	switch (bus->chip_id) {
+	case 0x4328:
+	case 0x5354:
+		switch (id) {
+		case LDO_VOLT1:
+			addr = 2;
+			shift = 25;
+			mask = 0xF;
+			break;
+		case LDO_VOLT2:
+			addr = 3;
+			shift = 1;
+			mask = 0xF;
+			break;
+		case LDO_VOLT3:
+			addr = 3;
+			shift = 9;
+			mask = 0xF;
+			break;
+		case LDO_PAREF:
+			addr = 3;
+			shift = 17;
+			mask = 0x3F;
+			break;
+		default:
+			SSB_WARN_ON(1);
+			return;
+		}
+		break;
+	case 0x4312:
+		if (SSB_WARN_ON(id != LDO_PAREF))
+			return;
+		addr = 0;
+		shift = 21;
+		mask = 0x3F;
+		break;
+	default:
+		return;
+	}
+
+	ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
+				  (voltage & mask) << shift);
+}
+
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
+{
+	struct ssb_bus *bus = cc->dev->bus;
+	int ldo;
+
+	switch (bus->chip_id) {
+	case 0x4312:
+		ldo = SSB_PMURES_4312_PA_REF_LDO;
+		break;
+	case 0x4328:
+		ldo = SSB_PMURES_4328_PA_REF_LDO;
+		break;
+	case 0x5354:
+		ldo = SSB_PMURES_5354_PA_REF_LDO;
+		break;
+	default:
+		return;
+	}
+
+	if (on)
+		chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
+	else
+		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
+	chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
+}
+
+EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
+EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -12,6 +12,7 @@
 #include <linux/ssb/ssb_driver_gige.h>
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
+#include <linux/slab.h>
 
 
 /*
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco
 				set_irq(dev, irq++);
 			}
 			break;
-			/* fallthrough */
 		case SSB_DEV_PCI:
 		case SSB_DEV_ETHERNET:
 		case SSB_DEV_ETHERNET_GBIT:
@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco
 				set_irq(dev, irq++);
 				break;
 			}
+			/* fallthrough */
+		case SSB_DEV_EXTIF:
+			set_irq(dev, 0);
+			break;
 		}
 	}
 	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore
 	.pci_ops	= &ssb_pcicore_pciops,
 	.io_resource	= &ssb_pcicore_io_resource,
 	.mem_resource	= &ssb_pcicore_mem_resource,
-	.mem_offset	= 0x24000000,
 };
 
-static u32 ssb_pcicore_pcibus_iobase = 0x100;
-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-
 /* This function is called when doing a pci_enable_device().
  * We must first check if the device is a device on the PCI-core bridge. */
 int ssb_pcicore_plat_dev_init(struct pci_dev *d)
 {
-	struct resource *res;
-	int pos, size;
-	u32 *base;
-
 	if (d->bus->ops != &ssb_pcicore_pciops) {
 		/* This is not a device on the PCI-core bridge. */
 		return -ENODEV;
@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci
 	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
 		   pci_name(d));
 
-	/* Fix up resource bases */
-	for (pos = 0; pos < 6; pos++) {
-		res = &d->resource[pos];
-		if (res->flags & IORESOURCE_IO)
-			base = &ssb_pcicore_pcibus_iobase;
-		else
-			base = &ssb_pcicore_pcibus_membase;
-		res->flags |= IORESOURCE_PCI_FIXED;
-		if (res->end) {
-			size = res->end - res->start + 1;
-			if (*base & (size - 1))
-				*base = (*base + size) & ~(size - 1);
-			res->start = *base;
-			res->end = res->start + size - 1;
-			*base += size;
-			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-		}
-		/* Fix up PCI bridge BAR0 only */
-		if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
-			break;
-	}
 	/* Fix up interrupt lines */
 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
 	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
@@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
 	might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
 
 	/* Enable interrupts for this device. */
-	if (bus->host_pci &&
-	    ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
+	if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
 		u32 coremask;
 
 		/* Calculate the "coremask" for the device. */
 		coremask = (1 << dev->core_index);
 
+		SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
 		err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
 		if (err)
 			goto out;
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -17,6 +17,8 @@
 #include <linux/ssb/ssb_driver_gige.h>
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
@@ -88,6 +90,25 @@ found:
 }
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
+#ifdef CONFIG_SSB_SDIOHOST
+struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func)
+{
+	struct ssb_bus *bus;
+
+	ssb_buses_lock();
+	list_for_each_entry(bus, &buses, list) {
+		if (bus->bustype == SSB_BUSTYPE_SDIO &&
+		    bus->host_sdio == func)
+			goto found;
+	}
+	bus = NULL;
+found:
+	ssb_buses_unlock();
+
+	return bus;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
 int ssb_for_each_bus_call(unsigned long data,
 			  int (*func)(struct ssb_bus *bus, unsigned long data))
 {
@@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de
 		put_device(dev->dev);
 }
 
+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
+{
+	if (drv)
+		get_driver(&drv->drv);
+	return drv;
+}
+
+static inline void ssb_driver_put(struct ssb_driver *drv)
+{
+	if (drv)
+		put_driver(&drv->drv);
+}
+
 static int ssb_device_resume(struct device *dev)
 {
 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
@@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
 EXPORT_SYMBOL(ssb_bus_suspend);
 
 #ifdef CONFIG_SSB_SPROM
-int ssb_devices_freeze(struct ssb_bus *bus)
+/** ssb_devices_freeze - Freeze all devices on the bus.
+ *
+ * After freezing no device driver will be handling a device
+ * on this bus anymore. ssb_devices_thaw() must be called after
+ * a successful freeze to reactivate the devices.
+ *
+ * @bus: The bus.
+ * @ctx: Context structure. Pass this to ssb_devices_thaw().
+ */
+int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
 {
-	struct ssb_device *dev;
-	struct ssb_driver *drv;
-	int err = 0;
-	int i;
-	pm_message_t state = PMSG_FREEZE;
+	struct ssb_device *sdev;
+	struct ssb_driver *sdrv;
+	unsigned int i;
+
+	memset(ctx, 0, sizeof(*ctx));
+	ctx->bus = bus;
+	SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
 
-	/* First check that we are capable to freeze all devices. */
 	for (i = 0; i < bus->nr_devices; i++) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
-			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
+		sdev = ssb_device_get(&bus->devices[i]);
+
+		if (!sdev->dev || !sdev->dev->driver ||
+		    !device_is_registered(sdev->dev)) {
+			ssb_device_put(sdev);
 			continue;
-		if (!drv->suspend) {
-			/* Nope, can't suspend this one. */
-			return -EOPNOTSUPP;
 		}
-	}
-	/* Now suspend all devices */
-	for (i = 0; i < bus->nr_devices; i++) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
+		sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
+		if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
+			ssb_device_put(sdev);
 			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
-			continue;
-		err = drv->suspend(dev, state);
-		if (err) {
-			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
-				   dev_name(dev->dev));
-			goto err_unwind;
 		}
+		sdrv->remove(sdev);
+		ctx->device_frozen[i] = 1;
 	}
 
 	return 0;
-err_unwind:
-	for (i--; i >= 0; i--) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
-			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
-			continue;
-		if (drv->resume)
-			drv->resume(dev);
-	}
-	return err;
 }
 
-int ssb_devices_thaw(struct ssb_bus *bus)
+/** ssb_devices_thaw - Unfreeze all devices on the bus.
+ *
+ * This will re-attach the device drivers and re-init the devices.
+ *
+ * @ctx: The context structure from ssb_devices_freeze()
+ */
+int ssb_devices_thaw(struct ssb_freeze_context *ctx)
 {
-	struct ssb_device *dev;
-	struct ssb_driver *drv;
-	int err;
-	int i;
+	struct ssb_bus *bus = ctx->bus;
+	struct ssb_device *sdev;
+	struct ssb_driver *sdrv;
+	unsigned int i;
+	int err, result = 0;
 
 	for (i = 0; i < bus->nr_devices; i++) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
+		if (!ctx->device_frozen[i])
 			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
+		sdev = &bus->devices[i];
+
+		if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
 			continue;
-		if (SSB_WARN_ON(!drv->resume))
+		sdrv = drv_to_ssb_drv(sdev->dev->driver);
+		if (SSB_WARN_ON(!sdrv || !sdrv->probe))
 			continue;
-		err = drv->resume(dev);
+
+		err = sdrv->probe(sdev, &sdev->id);
 		if (err) {
 			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
-				   dev_name(dev->dev));
+				   dev_name(sdev->dev));
+			result = err;
 		}
+		ssb_driver_put(sdrv);
+		ssb_device_put(sdev);
 	}
 
-	return 0;
+	return result;
 }
 #endif /* CONFIG_SSB_SPROM */
 
@@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi
 			     ssb_dev->id.revision);
 }
 
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+}
+
+ssb_config_attr(core_num, core_index, "%u\n")
+ssb_config_attr(coreid, id.coreid, "0x%04x\n")
+ssb_config_attr(vendor, id.vendor, "0x%04x\n")
+ssb_config_attr(revision, id.revision, "%u\n")
+ssb_config_attr(irq, irq, "%u\n")
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n",
+		       ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+
+static struct device_attribute ssb_device_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(core_num),
+	__ATTR_RO(coreid),
+	__ATTR_RO(vendor),
+	__ATTR_RO(revision),
+	__ATTR_RO(irq),
+	__ATTR_NULL,
+};
+
 static struct bus_type ssb_bustype = {
 	.name		= "ssb",
 	.match		= ssb_bus_match,
@@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = {
 	.suspend	= ssb_device_suspend,
 	.resume		= ssb_device_resume,
 	.uevent		= ssb_device_uevent,
+	.dev_attrs	= ssb_device_attrs,
 };
 
 static void ssb_buses_lock(void)
@@ -461,6 +516,7 @@ static int ssb_devices_register(struct s
 #ifdef CONFIG_SSB_PCIHOST
 			sdev->irq = bus->host_pci->irq;
 			dev->parent = &bus->host_pci->dev;
+			sdev->dma_dev = dev->parent;
 #endif
 			break;
 		case SSB_BUSTYPE_PCMCIA:
@@ -469,8 +525,14 @@ static int ssb_devices_register(struct s
 			dev->parent = &bus->host_pcmcia->dev;
 #endif
 			break;
+		case SSB_BUSTYPE_SDIO:
+#ifdef CONFIG_SSB_SDIOHOST
+			dev->parent = &bus->host_sdio->dev;
+#endif
+			break;
 		case SSB_BUSTYPE_SSB:
 			dev->dma_mask = &dev->coherent_dma_mask;
+			sdev->dma_dev = dev;
 			break;
 		}
 
@@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b
 	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
 	if (err)
 		goto out;
+
+	/* Init SDIO-host device (if any), before the scan */
+	err = ssb_sdio_init(bus);
+	if (err)
+		goto err_disable_xtal;
+
 	ssb_buses_lock();
 	bus->busnumber = next_busnumber;
 	/* Scan for devices (cores) */
 	err = ssb_bus_scan(bus, baseaddr);
 	if (err)
-		goto err_disable_xtal;
+		goto err_sdio_exit;
 
 	/* Init PCI-host device (if any) */
 	err = ssb_pci_init(bus);
@@ -776,6 +844,8 @@ err_pci_exit:
 	ssb_pci_exit(bus);
 err_unmap:
 	ssb_iounmap(bus);
+err_sdio_exit:
+	ssb_sdio_exit(bus);
 err_disable_xtal:
 	ssb_buses_unlock();
 	ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
@@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b
 	if (!err) {
 		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
 			   "PCI device %s\n", dev_name(&host_pci->dev));
+	} else {
+		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
+			   " of SSB with error %d\n", err);
 	}
 
 	return err;
@@ -825,6 +898,28 @@ int ssb_bus_pcmciabus_register(struct ss
 EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
+#ifdef CONFIG_SSB_SDIOHOST
+int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,
+			     unsigned int quirks)
+{
+	int err;
+
+	bus->bustype = SSB_BUSTYPE_SDIO;
+	bus->host_sdio = func;
+	bus->ops = &ssb_sdio_ops;
+	bus->quirks = quirks;
+
+	err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
+	if (!err) {
+		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+			   "SDIO device %s\n", sdio_func_id(func));
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(ssb_bus_sdiobus_register);
+#endif /* CONFIG_SSB_PCMCIAHOST */
+
 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 			    unsigned long baseaddr,
 			    ssb_invariants_func_t get_invariants)
@@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device
 }
 EXPORT_SYMBOL(ssb_device_enable);
 
-/* Wait for a bit in a register to get set or unset.
+/* Wait for bitmask in a register to get set or cleared.
  * timeout is in units of ten-microseconds */
-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
-			int timeout, int set)
+static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
+			 int timeout, int set)
 {
 	int i;
 	u32 val;
@@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic
 	for (i = 0; i < timeout; i++) {
 		val = ssb_read32(dev, reg);
 		if (set) {
-			if (val & bitmask)
+			if ((val & bitmask) == bitmask)
 				return 0;
 		} else {
 			if (!(val & bitmask))
@@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic
 
 void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 {
-	u32 reject;
+	u32 reject, val;
 
 	if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET)
 		return;
 
 	reject = ssb_tmslow_reject_bitmask(dev);
-	ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
-	ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1);
-	ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
-	ssb_write32(dev, SSB_TMSLOW,
-		    SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
-		    reject | SSB_TMSLOW_RESET |
-		    core_specific_flags);
-	ssb_flush_tmslow(dev);
+
+	if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) {
+		ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK);
+		ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1);
+		ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0);
+
+		if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+			val = ssb_read32(dev, SSB_IMSTATE);
+			val |= SSB_IMSTATE_REJECT;
+			ssb_write32(dev, SSB_IMSTATE, val);
+			ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000,
+				      0);
+		}
+
+		ssb_write32(dev, SSB_TMSLOW,
+			SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
+			reject | SSB_TMSLOW_RESET |
+			core_specific_flags);
+		ssb_flush_tmslow(dev);
+
+		if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) {
+			val = ssb_read32(dev, SSB_IMSTATE);
+			val &= ~SSB_IMSTATE_REJECT;
+			ssb_write32(dev, SSB_IMSTATE, val);
+		}
+	}
 
 	ssb_write32(dev, SSB_TMSLOW,
 		    reject | SSB_TMSLOW_RESET |
@@ -1358,8 +1471,10 @@ static int __init ssb_modinit(void)
 	ssb_buses_lock();
 	err = ssb_attach_queued_buses();
 	ssb_buses_unlock();
-	if (err)
+	if (err) {
 		bus_unregister(&ssb_bustype);
+		goto out;
+	}
 
 	err = b43_pci_ssb_bridge_init();
 	if (err) {
@@ -1375,7 +1490,7 @@ static int __init ssb_modinit(void)
 		/* don't fail SSB init because of this */
 		err = 0;
 	}
-
+out:
 	return err;
 }
 /* ssb must be initialized after PCI but before the ssb drivers.
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -17,6 +17,7 @@
 
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
 
@@ -167,10 +168,16 @@ err_pci:
 }
 
 /* Get the word-offset for a SSB_SPROM_XXX define. */
-#define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
+#define SPOFF(offset)	((offset) / sizeof(u16))
 /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
-#define SPEX(_outvar, _offset, _mask, _shift)	\
+#define SPEX16(_outvar, _offset, _mask, _shift)	\
 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+#define SPEX32(_outvar, _offset, _mask, _shift)	\
+	out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
+			   in[SPOFF(_offset)]) & (_mask)) >> (_shift))
+#define SPEX(_outvar, _offset, _mask, _shift) \
+	SPEX16(_outvar, _offset, _mask, _shift)
+
 
 static inline u8 ssb_crc8(u8 crc, u8 data)
 {
@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
 	int i;
 
 	for (i = 0; i < bus->sprom_size; i++)
-		sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
+		sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
 
 	return 0;
 }
@@ -278,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
 			ssb_printk("75%%");
 		else if (i % 2)
 			ssb_printk(".");
-		writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
+		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
 		mmiowb();
 		msleep(20);
 	}
@@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss
 	out->antenna_gain.ghz5.a3 = gain;
 }
 
+/* Revs 4 5 and 8 have partially shared layout */
+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
+{
+	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
+	     SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
+	SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
+	     SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
+	SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
+	     SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
+	SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
+	     SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
+
+	SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
+	     SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
+	SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
+	     SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
+	SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
+	     SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
+	SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
+	     SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
+
+	SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
+	     SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
+	SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
+	     SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
+	SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
+	     SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
+	SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
+	     SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
+
+	SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
+	     SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
+	SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
+	     SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
+	SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
+	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
+	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
+	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
+}
+
 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
 {
 	int i;
@@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb
 		SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
 		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
 		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
+		SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
+		SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
 	} else {
 		SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
 		SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
 		SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
+		SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
+		SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0);
 	}
 	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
 	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
 	       sizeof(out->antenna_gain.ghz5));
 
+	sprom_extract_r458(out, in);
+
 	/* TODO - get remaining rev 4 stuff needed */
 }
 
@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
 
 	/* extract the MAC address */
 	for (i = 0; i < 3; i++) {
-		v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
+		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
 		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
 	}
 	SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
 	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
+	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
+	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
 	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
 	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
 	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
 	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
 	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
 	     SSB_SPROM8_ITSSI_A_SHIFT);
+	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
+	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
+	     SSB_SPROM8_MAXP_AL_SHIFT);
 	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
 	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
 	     SSB_SPROM8_GPIOA_P1_SHIFT);
 	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
 	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
 	     SSB_SPROM8_GPIOB_P3_SHIFT);
+	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
+	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
+	     SSB_SPROM8_TRI5G_SHIFT);
+	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
+	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
+	     SSB_SPROM8_TRI5GH_SHIFT);
+	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
+	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
+	     SSB_SPROM8_RXPO5G_SHIFT);
+	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
+	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
+	     SSB_SPROM8_RSSISMC2G_SHIFT);
+	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
+	     SSB_SPROM8_RSSISAV2G_SHIFT);
+	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
+	     SSB_SPROM8_BXA2G_SHIFT);
+	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
+	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
+	     SSB_SPROM8_RSSISMC5G_SHIFT);
+	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
+	     SSB_SPROM8_RSSISAV5G_SHIFT);
+	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
+	     SSB_SPROM8_BXA5G_SHIFT);
+	SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
+	SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
+	SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
+	SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
+	SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
+	SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
+	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
+	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
+	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
+	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
+	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
+	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
+	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
+	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
+	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
+	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
+	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
 
 	/* Extract the antenna gain values. */
 	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
@@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_
 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
 	       sizeof(out->antenna_gain.ghz5));
 
+	sprom_extract_r458(out, in);
+
 	/* TODO - get remaining rev 8 stuff needed */
 }
 
@@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus
 	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
 	memset(out->et1mac, 0xFF, 6);
+
 	if ((bus->chip_id & 0xFF00) == 0x4400) {
 		/* Workaround: The BCM44XX chip has a stupid revision
 		 * number stored in the SPROM.
 		 * Always extract r1. */
 		out->revision = 1;
+		ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
+	}
+
+	switch (out->revision) {
+	case 1:
+	case 2:
+	case 3:
 		sprom_extract_r123(out, in);
-	} else if (bus->chip_id == 0x4321) {
-		/* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
-		out->revision = 4;
+		break;
+	case 4:
+	case 5:
 		sprom_extract_r45(out, in);
-	} else {
-		switch (out->revision) {
-		case 1:
-		case 2:
-		case 3:
-			sprom_extract_r123(out, in);
-			break;
-		case 4:
-		case 5:
-			sprom_extract_r45(out, in);
-			break;
-		case 8:
-			sprom_extract_r8(out, in);
-			break;
-		default:
-			ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
-				   "  revision %d detected. Will extract"
-				   " v1\n", out->revision);
-			sprom_extract_r123(out, in);
-		}
+		break;
+	case 8:
+		sprom_extract_r8(out, in);
+		break;
+	default:
+		ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+			   " revision %d detected. Will extract"
+			   " v1\n", out->revision);
+		out->revision = 1;
+		sprom_extract_r123(out, in);
 	}
 
 	if (out->boardflags_lo == 0xFFFF)
@@ -565,12 +663,34 @@ static int ssb_pci_sprom_get(struct ssb_
 			     struct ssb_sprom *sprom)
 {
 	const struct ssb_sprom *fallback;
-	int err = -ENOMEM;
+	int err;
 	u16 *buf;
 
+	if (!ssb_is_sprom_available(bus)) {
+		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
+		return -ENODEV;
+	}
+	if (bus->chipco.dev) {	/* can be unavailible! */
+		/*
+		 * get SPROM offset: SSB_SPROM_BASE1 except for
+		 * chipcommon rev >= 31 or chip ID is 0x4312 and
+		 * chipcommon status & 3 == 2
+		 */
+		if (bus->chipco.dev->id.revision >= 31)
+			bus->sprom_offset = SSB_SPROM_BASE31;
+		else if (bus->chip_id == 0x4312 &&
+			 (bus->chipco.status & 0x03) == 2)
+			bus->sprom_offset = SSB_SPROM_BASE31;
+		else
+			bus->sprom_offset = SSB_SPROM_BASE1;
+	} else {
+		bus->sprom_offset = SSB_SPROM_BASE1;
+	}
+	ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
+
 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
 	if (!buf)
-		goto out;
+		return -ENOMEM;
 	bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
 	sprom_do_read(bus, buf);
 	err = sprom_check_crc(buf, bus->sprom_size);
@@ -580,7 +700,7 @@ static int ssb_pci_sprom_get(struct ssb_
 		buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
 			      GFP_KERNEL);
 		if (!buf)
-			goto out;
+			return -ENOMEM;
 		bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
 		sprom_do_read(bus, buf);
 		err = sprom_check_crc(buf, bus->sprom_size);
@@ -602,7 +722,6 @@ static int ssb_pci_sprom_get(struct ssb_
 
 out_free:
 	kfree(buf);
-out:
 	return err;
 }
 
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/ssb/ssb.h>
 
 
@@ -58,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_
 	struct ssb_bus *ssb;
 	int err = -ENOMEM;
 	const char *name;
+	u32 val;
 
 	ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
 	if (!ssb)
@@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_
 		goto err_pci_disable;
 	pci_set_master(dev);
 
+	/* Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_read_config_dword(dev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
 	err = ssb_bus_pcibus_register(ssb, dev);
 	if (err)
 		goto err_pci_release_regions;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
 	}						\
   } while (0)
 
-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
-			      struct ssb_init_invariants *iv)
+static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
+			tuple_t *tuple,
+			void *priv)
 {
-	tuple_t tuple;
-	int res;
-	unsigned char buf[32];
+	struct ssb_sprom *sprom = priv;
+
+	if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
+		return -EINVAL;
+	if (tuple->TupleDataLen != ETH_ALEN + 2)
+		return -EINVAL;
+	if (tuple->TupleData[1] != ETH_ALEN)
+		return -EINVAL;
+	memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
+	return 0;
+};
+
+static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
+					tuple_t *tuple,
+					void *priv)
+{
+	struct ssb_init_invariants *iv = priv;
 	struct ssb_sprom *sprom = &iv->sprom;
 	struct ssb_boardinfo *bi = &iv->boardinfo;
 	const char *error_description;
 
+	GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
+	switch (tuple->TupleData[0]) {
+	case SSB_PCMCIA_CIS_ID:
+		GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
+			      (tuple->TupleDataLen != 7),
+			      "id tpl size");
+		bi->vendor = tuple->TupleData[1] |
+			((u16)tuple->TupleData[2] << 8);
+		break;
+	case SSB_PCMCIA_CIS_BOARDREV:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"boardrev tpl size");
+		sprom->board_rev = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_PA:
+		GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
+			(tuple->TupleDataLen != 10),
+			"pa tpl size");
+		sprom->pa0b0 = tuple->TupleData[1] |
+			((u16)tuple->TupleData[2] << 8);
+		sprom->pa0b1 = tuple->TupleData[3] |
+			((u16)tuple->TupleData[4] << 8);
+		sprom->pa0b2 = tuple->TupleData[5] |
+			((u16)tuple->TupleData[6] << 8);
+		sprom->itssi_a = tuple->TupleData[7];
+		sprom->itssi_bg = tuple->TupleData[7];
+		sprom->maxpwr_a = tuple->TupleData[8];
+		sprom->maxpwr_bg = tuple->TupleData[8];
+		break;
+	case SSB_PCMCIA_CIS_OEMNAME:
+		/* We ignore this. */
+		break;
+	case SSB_PCMCIA_CIS_CCODE:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"ccode tpl size");
+		sprom->country_code = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_ANTENNA:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"ant tpl size");
+		sprom->ant_available_a = tuple->TupleData[1];
+		sprom->ant_available_bg = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_ANTGAIN:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"antg tpl size");
+		sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_BFLAGS:
+		GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
+			(tuple->TupleDataLen != 5),
+			"bfl tpl size");
+		sprom->boardflags_lo = tuple->TupleData[1] |
+			((u16)tuple->TupleData[2] << 8);
+		break;
+	case SSB_PCMCIA_CIS_LEDS:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 5,
+			"leds tpl size");
+		sprom->gpio0 = tuple->TupleData[1];
+		sprom->gpio1 = tuple->TupleData[2];
+		sprom->gpio2 = tuple->TupleData[3];
+		sprom->gpio3 = tuple->TupleData[4];
+		break;
+	}
+	return -ENOSPC; /* continue with next entry */
+
+error:
+	ssb_printk(KERN_ERR PFX
+		   "PCMCIA: Failed to fetch device invariants: %s\n",
+		   error_description);
+	return -ENODEV;
+}
+
+
+int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+			      struct ssb_init_invariants *iv)
+{
+	struct ssb_sprom *sprom = &iv->sprom;
+	int res;
+
 	memset(sprom, 0xFF, sizeof(*sprom));
 	sprom->revision = 1;
 	sprom->boardflags_lo = 0;
 	sprom->boardflags_hi = 0;
 
 	/* First fetch the MAC address. */
-	memset(&tuple, 0, sizeof(tuple));
-	tuple.DesiredTuple = CISTPL_FUNCE;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "MAC first tpl");
-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "MAC first tpl data");
-	while (1) {
-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
-		if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
-			break;
-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != 0, "MAC next tpl");
-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != 0, "MAC next tpl data");
+	res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+				ssb_pcmcia_get_mac, sprom);
+	if (res != 0) {
+		ssb_printk(KERN_ERR PFX
+			"PCMCIA: Failed to fetch MAC address\n");
+		return -ENODEV;
 	}
-	GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
-	memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
 
 	/* Fetch the vendor specific tuples. */
-	memset(&tuple, 0, sizeof(tuple));
-	tuple.DesiredTuple = SSB_PCMCIA_CIS;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "VEN first tpl");
-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "VEN first tpl data");
-	while (1) {
-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
-		switch (tuple.TupleData[0]) {
-		case SSB_PCMCIA_CIS_ID:
-			GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
-				      (tuple.TupleDataLen != 7),
-				      "id tpl size");
-			bi->vendor = tuple.TupleData[1] |
-			       ((u16)tuple.TupleData[2] << 8);
-			break;
-		case SSB_PCMCIA_CIS_BOARDREV:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "boardrev tpl size");
-			sprom->board_rev = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_PA:
-			GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
-				      (tuple.TupleDataLen != 10),
-				      "pa tpl size");
-			sprom->pa0b0 = tuple.TupleData[1] |
-				 ((u16)tuple.TupleData[2] << 8);
-			sprom->pa0b1 = tuple.TupleData[3] |
-				 ((u16)tuple.TupleData[4] << 8);
-			sprom->pa0b2 = tuple.TupleData[5] |
-				 ((u16)tuple.TupleData[6] << 8);
-			sprom->itssi_a = tuple.TupleData[7];
-			sprom->itssi_bg = tuple.TupleData[7];
-			sprom->maxpwr_a = tuple.TupleData[8];
-			sprom->maxpwr_bg = tuple.TupleData[8];
-			break;
-		case SSB_PCMCIA_CIS_OEMNAME:
-			/* We ignore this. */
-			break;
-		case SSB_PCMCIA_CIS_CCODE:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "ccode tpl size");
-			sprom->country_code = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_ANTENNA:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "ant tpl size");
-			sprom->ant_available_a = tuple.TupleData[1];
-			sprom->ant_available_bg = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_ANTGAIN:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "antg tpl size");
-			sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_BFLAGS:
-			GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
-				      (tuple.TupleDataLen != 5),
-				      "bfl tpl size");
-			sprom->boardflags_lo = tuple.TupleData[1] |
-					 ((u16)tuple.TupleData[2] << 8);
-			break;
-		case SSB_PCMCIA_CIS_LEDS:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 5,
-				      "leds tpl size");
-			sprom->gpio0 = tuple.TupleData[1];
-			sprom->gpio1 = tuple.TupleData[2];
-			sprom->gpio2 = tuple.TupleData[3];
-			sprom->gpio3 = tuple.TupleData[4];
-			break;
-		}
-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-		if (res == -ENOSPC)
-			break;
-		GOTO_ERROR_ON(res != 0, "VEN next tpl");
-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != 0, "VEN next tpl data");
-	}
+	res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
+				ssb_pcmcia_do_get_invariants, iv);
+	if ((res == 0) || (res == -ENOSPC))
+		return 0;
 
-	return 0;
-error:
 	ssb_printk(KERN_ERR PFX
-		   "PCMCIA: Failed to fetch device invariants: %s\n",
-		   error_description);
+			"PCMCIA: Failed to fetch device invariants\n");
 	return -ENODEV;
 }
 
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
 		       u16 offset)
 {
+	u32 lo, hi;
+
 	switch (bus->bustype) {
 	case SSB_BUSTYPE_SSB:
 		offset += current_coreidx * SSB_CORE_SIZE;
@@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b
 			offset -= 0x800;
 		} else
 			ssb_pcmcia_switch_segment(bus, 0);
-		break;
+		lo = readw(bus->mmio + offset);
+		hi = readw(bus->mmio + offset + 2);
+		return lo | (hi << 16);
+	case SSB_BUSTYPE_SDIO:
+		offset += current_coreidx * SSB_CORE_SIZE;
+		return ssb_sdio_scan_read32(bus, offset);
 	}
 	return readl(bus->mmio + offset);
 }
@@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu
 		return ssb_pci_switch_coreidx(bus, coreidx);
 	case SSB_BUSTYPE_PCMCIA:
 		return ssb_pcmcia_switch_coreidx(bus, coreidx);
+	case SSB_BUSTYPE_SDIO:
+		return ssb_sdio_scan_switch_coreidx(bus, coreidx);
 	}
 	return 0;
 }
@@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus)
 		SSB_BUG_ON(1); /* Can't reach this code. */
 #endif
 		break;
+	case SSB_BUSTYPE_SDIO:
+		break;
 	}
 	bus->mmio = NULL;
 	bus->mapped_device = NULL;
@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
 		SSB_BUG_ON(1); /* Can't reach this code. */
 #endif
 		break;
+	case SSB_BUSTYPE_SDIO:
+		/* Nothing to ioremap in the SDIO case, just fake it */
+		mmio = (void __iomem *)baseaddr;
+		break;
 	}
 
 	return mmio;
@@ -339,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
 		dev->bus = bus;
 		dev->ops = bus->ops;
 
-		ssb_dprintk(KERN_INFO PFX
+		printk(KERN_DEBUG PFX
 			    "Core %d found: %s "
 			    "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
 			    i, ssb_core_name(dev->id.coreid),
@@ -407,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
 			bus->pcicore.dev = dev;
 #endif /* CONFIG_SSB_DRIVER_PCICORE */
 			break;
+		case SSB_DEV_ETHERNET:
+			if (bus->bustype == SSB_BUSTYPE_PCI) {
+				if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
+				    (bus->host_pci->device & 0xFF00) == 0x4300) {
+					/* This is a dangling ethernet core on a
+					 * wireless device. Ignore it. */
+					continue;
+				}
+			}
+			break;
 		default:
 			break;
 		}
--- /dev/null
+++ b/drivers/ssb/sdio.c
@@ -0,0 +1,610 @@
+/*
+ * Sonics Silicon Backplane
+ * SDIO-Hostbus related functions
+ *
+ * Copyright 2009 Albert Herranz <albert_herranz@yahoo.es>
+ *
+ * Based on drivers/ssb/pcmcia.c
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ *
+ */
+
+#include <linux/ssb/ssb.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "ssb_private.h"
+
+/* Define the following to 1 to enable a printk on each coreswitch. */
+#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG		0
+
+
+/* Hardware invariants CIS tuples */
+#define SSB_SDIO_CIS			0x80
+#define  SSB_SDIO_CIS_SROMREV		0x00
+#define  SSB_SDIO_CIS_ID		0x01
+#define  SSB_SDIO_CIS_BOARDREV		0x02
+#define  SSB_SDIO_CIS_PA		0x03
+#define   SSB_SDIO_CIS_PA_PA0B0_LO	0
+#define   SSB_SDIO_CIS_PA_PA0B0_HI	1
+#define   SSB_SDIO_CIS_PA_PA0B1_LO	2
+#define   SSB_SDIO_CIS_PA_PA0B1_HI	3
+#define   SSB_SDIO_CIS_PA_PA0B2_LO	4
+#define   SSB_SDIO_CIS_PA_PA0B2_HI	5
+#define   SSB_SDIO_CIS_PA_ITSSI		6
+#define   SSB_SDIO_CIS_PA_MAXPOW	7
+#define  SSB_SDIO_CIS_OEMNAME		0x04
+#define  SSB_SDIO_CIS_CCODE		0x05
+#define  SSB_SDIO_CIS_ANTENNA		0x06
+#define  SSB_SDIO_CIS_ANTGAIN		0x07
+#define  SSB_SDIO_CIS_BFLAGS		0x08
+#define  SSB_SDIO_CIS_LEDS		0x09
+
+#define CISTPL_FUNCE_LAN_NODE_ID        0x04	/* same as in PCMCIA */
+
+
+/*
+ * Function 1 miscellaneous registers.
+ *
+ * Definitions match src/include/sbsdio.h from the
+ * Android Open Source Project
+ * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git
+ *
+ */
+#define SBSDIO_FUNC1_SBADDRLOW	0x1000a	/* SB Address window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRMID	0x1000b	/* SB Address window Mid (b23-b16) */
+#define SBSDIO_FUNC1_SBADDRHIGH	0x1000c	/* SB Address window High (b24-b31) */
+
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+#define SBSDIO_SBADDRLOW_MASK	0x80	/* Valid address bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK	0xff	/* Valid address bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK	0xff	/* Valid address bits in SBADDRHIGH */
+
+#define SBSDIO_SB_OFT_ADDR_MASK	0x7FFF	/* sb offset addr is <= 15 bits, 32k */
+
+/* REVISIT: this flag doesn't seem to matter */
+#define SBSDIO_SB_ACCESS_2_4B_FLAG	0x8000	/* forces 32-bit SB access */
+
+
+/*
+ * Address map within the SDIO function address space (128K).
+ *
+ *   Start   End     Description
+ *   ------- ------- ------------------------------------------
+ *   0x00000 0x0ffff selected backplane address window (64K)
+ *   0x10000 0x1ffff backplane control registers (max 64K)
+ *
+ * The current address window is configured by writing to registers
+ * SBADDRLOW, SBADDRMID and SBADDRHIGH.
+ *
+ * In order to access the contents of a 32-bit Silicon Backplane address
+ * the backplane address window must be first loaded with the highest
+ * 16 bits of the target address. Then, an access must be done to the
+ * SDIO function address space using the lower 15 bits of the address.
+ * Bit 15 of the address must be set when doing 32 bit accesses.
+ *
+ * 10987654321098765432109876543210
+ * WWWWWWWWWWWWWWWWW                 SB Address Window
+ *                 OOOOOOOOOOOOOOOO  Offset within SB Address Window
+ *                 a                 32-bit access flag
+ */
+
+
+/*
+ * SSB I/O via SDIO.
+ *
+ * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K).
+ */
+
+static inline struct device *ssb_sdio_dev(struct ssb_bus *bus)
+{
+	return &bus->host_sdio->dev;
+}
+
+/* host claimed */
+static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val)
+{
+	int error = 0;
+
+	sdio_writeb(bus->host_sdio, val, addr, &error);
+	if (unlikely(error)) {
+		dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n",
+			addr, val, error);
+	}
+
+	return error;
+}
+
+#if 0
+static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr)
+{
+	u8 val;
+	int error = 0;
+
+	val = sdio_readb(bus->host_sdio, addr, &error);
+	if (unlikely(error)) {
+		dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n",
+			addr, val, error);
+	}
+
+	return val;
+}
+#endif
+
+/* host claimed */
+static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address)
+{
+	int error;
+
+	error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW,
+				(address >> 8) & SBSDIO_SBADDRLOW_MASK);
+	if (error)
+		goto out;
+	error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID,
+				(address >> 16) & SBSDIO_SBADDRMID_MASK);
+	if (error)
+		goto out;
+	error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH,
+				(address >> 24) & SBSDIO_SBADDRHIGH_MASK);
+	if (error)
+		goto out;
+	bus->sdio_sbaddr = address;
+out:
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "failed to set address window"
+			" to 0x%08x, error %d\n", address, error);
+	}
+
+	return error;
+}
+
+/* for enumeration use only */
+u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+	u32 val;
+	int error;
+
+	sdio_claim_host(bus->host_sdio);
+	val = sdio_readl(bus->host_sdio, offset, &error);
+	sdio_release_host(bus->host_sdio);
+	if (unlikely(error)) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+
+	return val;
+}
+
+/* for enumeration use only */
+int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+	u32 sbaddr;
+	int error;
+
+	sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+	sdio_claim_host(bus->host_sdio);
+	error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+	sdio_release_host(bus->host_sdio);
+	if (error) {
+		dev_err(ssb_sdio_dev(bus), "failed to switch to core %u,"
+			" error %d\n", coreidx, error);
+		goto out;
+	}
+out:
+	return error;
+}
+
+/* host must be already claimed */
+int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
+{
+	u8 coreidx = dev->core_index;
+	u32 sbaddr;
+	int error = 0;
+
+	sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE;
+	if (unlikely(bus->sdio_sbaddr != sbaddr)) {
+#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG
+		dev_info(ssb_sdio_dev(bus),
+			   "switching to %s core, index %d\n",
+			   ssb_core_name(dev->id.coreid), coreidx);
+#endif
+		error = ssb_sdio_set_sbaddr_window(bus, sbaddr);
+		if (error) {
+			dev_dbg(ssb_sdio_dev(bus), "failed to switch to"
+				" core %u, error %d\n", coreidx, error);
+			goto out;
+		}
+		bus->mapped_device = dev;
+	}
+
+out:
+	return error;
+}
+
+static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset)
+{
+	struct ssb_bus *bus = dev->bus;
+	u8 val = 0xff;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	val = sdio_readb(bus->host_sdio, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+
+	return val;
+}
+
+static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset)
+{
+	struct ssb_bus *bus = dev->bus;
+	u16 val = 0xffff;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	val = sdio_readw(bus->host_sdio, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+
+	return val;
+}
+
+static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset)
+{
+	struct ssb_bus *bus = dev->bus;
+	u32 val = 0xffffffff;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+	val = sdio_readl(bus->host_sdio, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+
+	return val;
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer,
+				  size_t count, u16 offset, u8 reg_width)
+{
+	size_t saved_count = count;
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+		error = -EIO;
+		memset(buffer, 0xff, count);
+		goto err_out;
+	}
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+	switch (reg_width) {
+	case sizeof(u8): {
+		error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+		break;
+	}
+	case sizeof(u16): {
+		SSB_WARN_ON(count & 1);
+		error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+		break;
+	}
+	case sizeof(u32): {
+		SSB_WARN_ON(count & 3);
+		offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+		error = sdio_readsb(bus->host_sdio, buffer, offset, count);
+		break;
+	}
+	default:
+		SSB_WARN_ON(1);
+	}
+	if (!error)
+		goto out;
+
+err_out:
+	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
+		bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+	sdio_release_host(bus->host_sdio);
+}
+#endif /* CONFIG_SSB_BLOCKIO */
+
+static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val)
+{
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	sdio_writeb(bus->host_sdio, val, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val)
+{
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	sdio_writew(bus->host_sdio, val, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val)
+{
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev)))
+		goto out;
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+	offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+	sdio_writel(bus->host_sdio, val, offset, &error);
+	if (error) {
+		dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n",
+			bus->sdio_sbaddr >> 16, offset, val, error);
+	}
+	if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32)
+		sdio_readl(bus->host_sdio, 0, &error);
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+#ifdef CONFIG_SSB_BLOCKIO
+static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
+{
+	size_t saved_count = count;
+	struct ssb_bus *bus = dev->bus;
+	int error = 0;
+
+	sdio_claim_host(bus->host_sdio);
+	if (unlikely(ssb_sdio_switch_core(bus, dev))) {
+		error = -EIO;
+		memset((void *)buffer, 0xff, count);
+		goto err_out;
+	}
+	offset |= bus->sdio_sbaddr & 0xffff;
+	offset &= SBSDIO_SB_OFT_ADDR_MASK;
+
+	switch (reg_width) {
+	case sizeof(u8):
+		error = sdio_writesb(bus->host_sdio, offset,
+				     (void *)buffer, count);
+		break;
+	case sizeof(u16):
+		SSB_WARN_ON(count & 1);
+		error = sdio_writesb(bus->host_sdio, offset,
+				     (void *)buffer, count);
+		break;
+	case sizeof(u32):
+		SSB_WARN_ON(count & 3);
+		offset |= SBSDIO_SB_ACCESS_2_4B_FLAG;	/* 32 bit data access */
+		error = sdio_writesb(bus->host_sdio, offset,
+				     (void *)buffer, count);
+		break;
+	default:
+		SSB_WARN_ON(1);
+	}
+	if (!error)
+		goto out;
+
+err_out:
+	dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n",
+		bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error);
+out:
+	sdio_release_host(bus->host_sdio);
+}
+
+#endif /* CONFIG_SSB_BLOCKIO */
+
+/* Not "static", as it's used in main.c */
+const struct ssb_bus_ops ssb_sdio_ops = {
+	.read8		= ssb_sdio_read8,
+	.read16		= ssb_sdio_read16,
+	.read32		= ssb_sdio_read32,
+	.write8		= ssb_sdio_write8,
+	.write16	= ssb_sdio_write16,
+	.write32	= ssb_sdio_write32,
+#ifdef CONFIG_SSB_BLOCKIO
+	.block_read	= ssb_sdio_block_read,
+	.block_write	= ssb_sdio_block_write,
+#endif
+};
+
+#define GOTO_ERROR_ON(condition, description) do {	\
+	if (unlikely(condition)) {			\
+		error_description = description;	\
+		goto error;				\
+	}						\
+  } while (0)
+
+int ssb_sdio_get_invariants(struct ssb_bus *bus,
+			    struct ssb_init_invariants *iv)
+{
+	struct ssb_sprom *sprom = &iv->sprom;
+	struct ssb_boardinfo *bi = &iv->boardinfo;
+	const char *error_description = "none";
+	struct sdio_func_tuple *tuple;
+	void *mac;
+
+	memset(sprom, 0xFF, sizeof(*sprom));
+	sprom->boardflags_lo = 0;
+	sprom->boardflags_hi = 0;
+
+	tuple = bus->host_sdio->tuples;
+	while (tuple) {
+		switch (tuple->code) {
+		case 0x22: /* extended function */
+			switch (tuple->data[0]) {
+			case CISTPL_FUNCE_LAN_NODE_ID:
+				GOTO_ERROR_ON((tuple->size != 7) &&
+					      (tuple->data[1] != 6),
+					      "mac tpl size");
+				/* fetch the MAC address. */
+				mac = tuple->data + 2;
+				memcpy(sprom->il0mac, mac, ETH_ALEN);
+				memcpy(sprom->et1mac, mac, ETH_ALEN);
+				break;
+			default:
+				break;
+			}
+			break;
+		case 0x80: /* vendor specific tuple */
+			switch (tuple->data[0]) {
+			case SSB_SDIO_CIS_SROMREV:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "sromrev tpl size");
+				sprom->revision = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_ID:
+				GOTO_ERROR_ON((tuple->size != 5) &&
+					      (tuple->size != 7),
+					      "id tpl size");
+				bi->vendor = tuple->data[1] |
+					     (tuple->data[2]<<8);
+				break;
+			case SSB_SDIO_CIS_BOARDREV:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "boardrev tpl size");
+				sprom->board_rev = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_PA:
+				GOTO_ERROR_ON((tuple->size != 9) &&
+					      (tuple->size != 10),
+					      "pa tpl size");
+				sprom->pa0b0 = tuple->data[1] |
+					 ((u16)tuple->data[2] << 8);
+				sprom->pa0b1 = tuple->data[3] |
+					 ((u16)tuple->data[4] << 8);
+				sprom->pa0b2 = tuple->data[5] |
+					 ((u16)tuple->data[6] << 8);
+				sprom->itssi_a = tuple->data[7];
+				sprom->itssi_bg = tuple->data[7];
+				sprom->maxpwr_a = tuple->data[8];
+				sprom->maxpwr_bg = tuple->data[8];
+				break;
+			case SSB_SDIO_CIS_OEMNAME:
+				/* Not present */
+				break;
+			case SSB_SDIO_CIS_CCODE:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "ccode tpl size");
+				sprom->country_code = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_ANTENNA:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "ant tpl size");
+				sprom->ant_available_a = tuple->data[1];
+				sprom->ant_available_bg = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_ANTGAIN:
+				GOTO_ERROR_ON(tuple->size != 2,
+					      "antg tpl size");
+				sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+				sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+				sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+				sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+				sprom->antenna_gain.ghz5.a3 = tuple->data[1];
+				break;
+			case SSB_SDIO_CIS_BFLAGS:
+				GOTO_ERROR_ON((tuple->size != 3) &&
+					      (tuple->size != 5),
+					      "bfl tpl size");
+				sprom->boardflags_lo = tuple->data[1] |
+						 ((u16)tuple->data[2] << 8);
+				break;
+			case SSB_SDIO_CIS_LEDS:
+				GOTO_ERROR_ON(tuple->size != 5,
+					      "leds tpl size");
+				sprom->gpio0 = tuple->data[1];
+				sprom->gpio1 = tuple->data[2];
+				sprom->gpio2 = tuple->data[3];
+				sprom->gpio3 = tuple->data[4];
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+		tuple = tuple->next;
+	}
+
+	return 0;
+error:
+	dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n",
+		error_description);
+	return -ENODEV;
+}
+
+void ssb_sdio_exit(struct ssb_bus *bus)
+{
+	if (bus->bustype != SSB_BUSTYPE_SDIO)
+		return;
+	/* Nothing to do here. */
+}
+
+int ssb_sdio_init(struct ssb_bus *bus)
+{
+	if (bus->bustype != SSB_BUSTYPE_SDIO)
+		return 0;
+
+	bus->sdio_sbaddr = ~0;
+
+	return 0;
+}
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -14,6 +14,7 @@
 #include "ssb_private.h"
 
 #include <linux/ctype.h>
+#include <linux/slab.h>
 
 
 static const struct ssb_sprom *fallback_sprom;
@@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
 	u16 *sprom;
 	int res = 0, err = -ENOMEM;
 	size_t sprom_size_words = bus->sprom_size;
+	struct ssb_freeze_context freeze;
 
 	sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
 	if (!sprom)
@@ -123,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
 	err = -ERESTARTSYS;
 	if (mutex_lock_interruptible(&bus->sprom_mutex))
 		goto out_kfree;
-	err = ssb_devices_freeze(bus);
-	if (err == -EOPNOTSUPP) {
-		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
-			   "No suspend support. Is CONFIG_PM enabled?\n");
-		goto out_unlock;
-	}
+	err = ssb_devices_freeze(bus, &freeze);
 	if (err) {
 		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
 		goto out_unlock;
 	}
 	res = sprom_write(bus, sprom);
-	err = ssb_devices_thaw(bus);
+	err = ssb_devices_thaw(&freeze);
 	if (err)
 		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
 out_unlock:
@@ -179,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback
 {
 	return fallback_sprom;
 }
+
+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
+bool ssb_is_sprom_available(struct ssb_bus *bus)
+{
+	/* status register only exists on chipcomon rev >= 11 and we need check
+	   for >= 31 only */
+	/* this routine differs from specs as we do not access SPROM directly
+	   on PCMCIA */
+	if (bus->bustype == SSB_BUSTYPE_PCI &&
+	    bus->chipco.dev &&	/* can be unavailible! */
+	    bus->chipco.dev->id.revision >= 31)
+		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
+
+	return true;
+}
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct
 }
 #endif /* CONFIG_SSB_PCMCIAHOST */
 
+/* sdio.c */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_sdio_get_invariants(struct ssb_bus *bus,
+				     struct ssb_init_invariants *iv);
+
+extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset);
+extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev);
+extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx);
+extern int ssb_sdio_hardware_setup(struct ssb_bus *bus);
+extern void ssb_sdio_exit(struct ssb_bus *bus);
+extern int ssb_sdio_init(struct ssb_bus *bus);
+
+extern const struct ssb_bus_ops ssb_sdio_ops;
+#else /* CONFIG_SSB_SDIOHOST */
+static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset)
+{
+	return 0;
+}
+static inline int ssb_sdio_switch_core(struct ssb_bus *bus,
+					 struct ssb_device *dev)
+{
+	return 0;
+}
+static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
+{
+	return 0;
+}
+static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus)
+{
+	return 0;
+}
+static inline void ssb_sdio_exit(struct ssb_bus *bus)
+{
+}
+static inline int ssb_sdio_init(struct ssb_bus *bus)
+{
+	return 0;
+}
+#endif /* CONFIG_SSB_SDIOHOST */
+
 
 /* scan.c */
 extern const char *ssb_core_name(u16 coreid);
@@ -136,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f
 
 /* core.c */
 extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
-extern int ssb_devices_freeze(struct ssb_bus *bus);
-extern int ssb_devices_thaw(struct ssb_bus *bus);
 extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
 int ssb_for_each_bus_call(unsigned long data,
 			  int (*func)(struct ssb_bus *bus, unsigned long data));
 extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
 
+struct ssb_freeze_context {
+	/* Pointer to the bus */
+	struct ssb_bus *bus;
+	/* Boolean list to indicate whether a device is frozen on this bus. */
+	bool device_frozen[SSB_MAX_NR_CORES];
+};
+extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
+extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
+
+
 
 /* b43_pci_bridge.c */
 #ifdef CONFIG_SSB_B43_PCI_BRIDGE
 extern int __init b43_pci_ssb_bridge_init(void);
 extern void __exit b43_pci_ssb_bridge_exit(void);
-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
+#else /* CONFIG_SSB_B43_PCI_BRIDGE */
 static inline int b43_pci_ssb_bridge_init(void)
 {
 	return 0;
@@ -156,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini
 static inline void b43_pci_ssb_bridge_exit(void)
 {
 }
-#endif /* CONFIG_SSB_PCIHOST */
+#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
 
 #endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2017,6 +2017,7 @@
 #define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
 #define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
 
+#define PCI_VENDOR_ID_BCM_GVC          0x14a4
 #define PCI_VENDOR_ID_BROADCOM		0x14e4
 #define PCI_DEVICE_ID_TIGON3_5752	0x1600
 #define PCI_DEVICE_ID_TIGON3_5752M	0x1601
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -27,24 +27,58 @@ struct ssb_sprom {
 	u8 et1mdcport;		/* MDIO for enet1 */
 	u8 board_rev;		/* Board revision number from SPROM. */
 	u8 country_code;	/* Country Code */
-	u8 ant_available_a;	/* A-PHY antenna available bits (up to 4) */
-	u8 ant_available_bg;	/* B/G-PHY antenna available bits (up to 4) */
+	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
+	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
 	u16 pa0b0;
 	u16 pa0b1;
 	u16 pa0b2;
 	u16 pa1b0;
 	u16 pa1b1;
 	u16 pa1b2;
+	u16 pa1lob0;
+	u16 pa1lob1;
+	u16 pa1lob2;
+	u16 pa1hib0;
+	u16 pa1hib1;
+	u16 pa1hib2;
 	u8 gpio0;		/* GPIO pin 0 */
 	u8 gpio1;		/* GPIO pin 1 */
 	u8 gpio2;		/* GPIO pin 2 */
 	u8 gpio3;		/* GPIO pin 3 */
-	u16 maxpwr_a;		/* A-PHY Amplifier Max Power (in dBm Q5.2) */
-	u16 maxpwr_bg;		/* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+	u16 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
 	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
 	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
-	u16 boardflags_lo;	/* Boardflags (low 16 bits) */
-	u16 boardflags_hi;	/* Boardflags (high 16 bits) */
+	u8 tri2g;		/* 2.4GHz TX isolation */
+	u8 tri5gl;		/* 5.2GHz TX isolation */
+	u8 tri5g;		/* 5.3GHz TX isolation */
+	u8 tri5gh;		/* 5.8GHz TX isolation */
+	u8 txpid2g[4];		/* 2GHz TX power index */
+	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
+	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
+	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
+	u8 rxpo2g;		/* 2GHz RX power offset */
+	u8 rxpo5g;		/* 5GHz RX power offset */
+	u8 rssisav2g;		/* 2GHz RSSI params */
+	u8 rssismc2g;
+	u8 rssismf2g;
+	u8 bxa2g;		/* 2GHz BX arch */
+	u8 rssisav5g;		/* 5GHz RSSI params */
+	u8 rssismc5g;
+	u8 rssismf5g;
+	u8 bxa5g;		/* 5GHz BX arch */
+	u16 cck2gpo;		/* CCK power offset */
+	u32 ofdm2gpo;		/* 2.4GHz OFDM power offset */
+	u32 ofdm5glpo;		/* 5.2GHz OFDM power offset */
+	u32 ofdm5gpo;		/* 5.3GHz OFDM power offset */
+	u32 ofdm5ghpo;		/* 5.8GHz OFDM power offset */
+	u16 boardflags_lo;	/* Board flags (bits 0-15) */
+	u16 boardflags_hi;	/* Board flags (bits 16-31) */
+	u16 boardflags2_lo;	/* Board flags (bits 32-47) */
+	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
+	/* TODO store board flags in a single u64 */
 
 	/* Antenna gain values for up to 4 antennas
 	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
@@ -58,7 +92,7 @@ struct ssb_sprom {
 		} ghz5;		/* 5GHz band */
 	} antenna_gain;
 
-	/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
+	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
 };
 
 /* Information about the PCB the circuitry is soldered on. */
@@ -137,7 +171,7 @@ struct ssb_device {
 	 * is an optimization. */
 	const struct ssb_bus_ops *ops;
 
-	struct device *dev;
+	struct device *dev, *dma_dev;
 
 	struct ssb_bus *bus;
 	struct ssb_device_id id;
@@ -208,6 +242,7 @@ enum ssb_bustype {
 	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
 	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
 	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
+	SSB_BUSTYPE_SDIO,	/* SSB is connected to SDIO bus */
 };
 
 /* board_vendor */
@@ -238,20 +273,33 @@ struct ssb_bus {
 
 	const struct ssb_bus_ops *ops;
 
-	/* The core in the basic address register window. (PCI bus only) */
+	/* The core currently mapped into the MMIO window.
+	 * Not valid on all host-buses. So don't use outside of SSB. */
 	struct ssb_device *mapped_device;
-	/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-	u8 mapped_pcmcia_seg;
+	union {
+		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+		u8 mapped_pcmcia_seg;
+		/* Current SSB base address window for SDIO. */
+		u32 sdio_sbaddr;
+	};
 	/* Lock for core and segment switching.
 	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
 	spinlock_t bar_lock;
 
-	/* The bus this backplane is running on. */
+	/* The host-bus this backplane is running on. */
 	enum ssb_bustype bustype;
-	/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
-	struct pci_dev *host_pci;
-	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
-	struct pcmcia_device *host_pcmcia;
+	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
+	union {
+		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+		struct pci_dev *host_pci;
+		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+		struct pcmcia_device *host_pcmcia;
+		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+		struct sdio_func *host_sdio;
+	};
+
+	/* See enum ssb_quirks */
+	unsigned int quirks;
 
 #ifdef CONFIG_SSB_SPROM
 	/* Mutex to protect the SPROM writing. */
@@ -261,6 +309,7 @@ struct ssb_bus {
 	/* ID information about the Chip. */
 	u16 chip_id;
 	u16 chip_rev;
+	u16 sprom_offset;
 	u16 sprom_size;		/* number of words in sprom */
 	u8 chip_package;
 
@@ -306,6 +355,11 @@ struct ssb_bus {
 #endif /* DEBUG */
 };
 
+enum ssb_quirks {
+	/* SDIO connected card requires performing a read after writing a 32-bit value */
+	SSB_QUIRK_SDIO_READ_AFTER_WRITE32	= (1 << 0),
+};
+
 /* The initialization-invariants. */
 struct ssb_init_invariants {
 	/* Versioning information about the PCB. */
@@ -336,9 +390,18 @@ extern int ssb_bus_pcmciabus_register(st
 				      struct pcmcia_device *pcmcia_dev,
 				      unsigned long baseaddr);
 #endif /* CONFIG_SSB_PCMCIAHOST */
+#ifdef CONFIG_SSB_SDIOHOST
+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
+				    struct sdio_func *sdio_func,
+				    unsigned int quirks);
+#endif /* CONFIG_SSB_SDIOHOST */
+
 
 extern void ssb_bus_unregister(struct ssb_bus *bus);
 
+/* Does the device have an SPROM? */
+extern bool ssb_is_sprom_available(struct ssb_bus *bus);
+
 /* Set a fallback SPROM.
  * See kdoc at the function definition for complete documentation. */
 extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -53,6 +53,7 @@
 #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
 #define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
 #define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
 #define SSB_CHIPCO_CORECTL		0x0008
 #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
 #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
@@ -385,6 +386,7 @@
 
 
 /** Chip specific Chip-Status register contents. */
+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
 #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
 #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
 #define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
@@ -398,6 +400,18 @@
 #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
 #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
 
+/** Macros to determine SPROM presence based on Chip-Status register. */
+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
+	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_OTP_SEL)
+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
+	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
+	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
+	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
+		SSB_CHIPCO_CHST_4325_OTP_SEL))
+
 
 
 /** Clockcontrol masks and values **/
@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
 struct ssb_chipcommon {
 	struct ssb_device *dev;
 	u32 capabilities;
+	u32 status;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
 	struct ssb_chipcommon_pmu pmu;
@@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct
 /* PMU support */
 extern void ssb_pmu_init(struct ssb_chipcommon *cc);
 
+enum ssb_pmu_ldo_volt_id {
+	LDO_PAREF = 0,
+	LDO_VOLT1,
+	LDO_VOLT2,
+	LDO_VOLT3,
+};
+
+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
+			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
 
 #endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -85,6 +85,8 @@
 #define  SSB_IMSTATE_AP_RSV	0x00000030 /* Reserved */
 #define  SSB_IMSTATE_IBE	0x00020000 /* In Band Error */
 #define  SSB_IMSTATE_TO		0x00040000 /* Timeout */
+#define  SSB_IMSTATE_BUSY	0x01800000 /* Busy (Backplane rev >= 2.3 only) */
+#define  SSB_IMSTATE_REJECT	0x02000000 /* Reject (Backplane rev >= 2.3 only) */
 #define SSB_INTVEC		0x0F94     /* SB Interrupt Mask */
 #define  SSB_INTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
 #define  SSB_INTVEC_ENET0	0x00000002 /* Enable interrupts for enet 0 */
@@ -162,7 +164,7 @@
 
 /* SPROM shadow area. If not otherwise noted, fields are
  * two bytes wide. Note that the SPROM can _only_ be read
- * in two-byte quantinies.
+ * in two-byte quantities.
  */
 #define SSB_SPROMSIZE_WORDS		64
 #define SSB_SPROMSIZE_BYTES		(SSB_SPROMSIZE_WORDS * sizeof(u16))
@@ -170,26 +172,27 @@
 #define SSB_SPROMSIZE_WORDS_R4		220
 #define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
 #define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
-#define SSB_SPROM_BASE			0x1000
-#define SSB_SPROM_REVISION		0x107E
+#define SSB_SPROM_BASE1			0x1000
+#define SSB_SPROM_BASE31		0x0800
+#define SSB_SPROM_REVISION		0x007E
 #define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
 #define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
 #define  SSB_SPROM_REVISION_CRC_SHIFT	8
 
 /* SPROM Revision 1 */
-#define SSB_SPROM1_SPID			0x1004	/* Subsystem Product ID for PCI */
-#define SSB_SPROM1_SVID			0x1006	/* Subsystem Vendor ID for PCI */
-#define SSB_SPROM1_PID			0x1008	/* Product ID for PCI */
-#define SSB_SPROM1_IL0MAC		0x1048	/* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM1_ET0MAC		0x104E	/* 6 bytes MAC address for Ethernet */
-#define SSB_SPROM1_ET1MAC		0x1054	/* 6 bytes MAC address for 802.11a */
-#define SSB_SPROM1_ETHPHY		0x105A	/* Ethernet PHY settings */
+#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
+#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
+#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
+#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
+#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
+#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
 #define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
 #define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
 #define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
 #define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
 #define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
-#define SSB_SPROM1_BINF			0x105C	/* Board info */
+#define SSB_SPROM1_BINF			0x005C	/* Board info */
 #define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
 #define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
 #define  SSB_SPROM1_BINF_CCODE_SHIFT	8
@@ -197,63 +200,63 @@
 #define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
 #define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
 #define  SSB_SPROM1_BINF_ANTA_SHIFT	14
-#define SSB_SPROM1_PA0B0		0x105E
-#define SSB_SPROM1_PA0B1		0x1060
-#define SSB_SPROM1_PA0B2		0x1062
-#define SSB_SPROM1_GPIOA		0x1064	/* General Purpose IO pins 0 and 1 */
+#define SSB_SPROM1_PA0B0		0x005E
+#define SSB_SPROM1_PA0B1		0x0060
+#define SSB_SPROM1_PA0B2		0x0062
+#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
 #define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
 #define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
 #define  SSB_SPROM1_GPIOA_P1_SHIFT	8
-#define SSB_SPROM1_GPIOB		0x1066	/* General Purpuse IO pins 2 and 3 */
+#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
 #define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
 #define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
 #define  SSB_SPROM1_GPIOB_P3_SHIFT	8
-#define SSB_SPROM1_MAXPWR		0x1068	/* Power Amplifier Max Power */
+#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
 #define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
 #define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
 #define  SSB_SPROM1_MAXPWR_A_SHIFT	8
-#define SSB_SPROM1_PA1B0		0x106A
-#define SSB_SPROM1_PA1B1		0x106C
-#define SSB_SPROM1_PA1B2		0x106E
-#define SSB_SPROM1_ITSSI		0x1070	/* Idle TSSI Target */
+#define SSB_SPROM1_PA1B0		0x006A
+#define SSB_SPROM1_PA1B1		0x006C
+#define SSB_SPROM1_PA1B2		0x006E
+#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
 #define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
 #define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
 #define  SSB_SPROM1_ITSSI_A_SHIFT	8
-#define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
-#define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
+#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
 #define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
 #define  SSB_SPROM1_AGAIN_BG_SHIFT	0
 #define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
 #define  SSB_SPROM1_AGAIN_A_SHIFT	8
 
 /* SPROM Revision 2 (inherits from rev 1) */
-#define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
-#define SSB_SPROM2_MAXP_A		0x103A	/* A-PHY Max Power */
+#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
+#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
 #define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
 #define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
 #define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
-#define SSB_SPROM2_PA1LOB0		0x103C	/* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB1		0x103E	/* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1LOB2		0x1040	/* A-PHY PowerAmplifier Low Settings */
-#define SSB_SPROM2_PA1HIB0		0x1042	/* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB1		0x1044	/* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_PA1HIB2		0x1046	/* A-PHY PowerAmplifier High Settings */
-#define SSB_SPROM2_OPO			0x1078	/* OFDM Power Offset from CCK Level */
+#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
+#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
+#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
 #define  SSB_SPROM2_OPO_VALUE		0x00FF
 #define  SSB_SPROM2_OPO_UNUSED		0xFF00
-#define SSB_SPROM2_CCODE		0x107C	/* Two char Country Code */
+#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
 
 /* SPROM Revision 3 (inherits most data from rev 2) */
-#define SSB_SPROM3_IL0MAC		0x104A	/* 6 bytes MAC address for 802.11b/g */
-#define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
-#define SSB_SPROM3_GPIOLDC		0x1042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
 #define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
 #define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
 #define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
 #define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
-#define SSB_SPROM3_CCKPO		0x1078	/* CCK Power Offset */
+#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
+#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
 #define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
 #define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
 #define  SSB_SPROM3_CCKPO_2M_SHIFT	4
@@ -264,104 +267,200 @@
 #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
 
 /* SPROM Revision 4 */
-#define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM4_ETHPHY		0x105A	/* Ethernet PHY settings ?? */
+#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
+#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
+#define SSB_SPROM4_BFL2LO		0x0048	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM4_BFL2HI		0x004A	/* Board flags 2 Hi */
+#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
+#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
 #define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
 #define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
 #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
 #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
 #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
-#define SSB_SPROM4_CCODE		0x1052	/* Country Code (2 bytes) */
-#define SSB_SPROM4_ANTAVAIL		0x105D  /* Antenna available bitfields */
-#define SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT	0
-#define SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
-#define SSB_SPROM4_BFLLO		0x1044	/* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN01		0x105E	/* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
+#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
 #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
 #define  SSB_SPROM4_AGAIN0_SHIFT	0
 #define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
 #define  SSB_SPROM4_AGAIN1_SHIFT	8
-#define SSB_SPROM4_AGAIN23		0x1060
+#define SSB_SPROM4_AGAIN23		0x0060
 #define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
 #define  SSB_SPROM4_AGAIN2_SHIFT	0
 #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
 #define  SSB_SPROM4_AGAIN3_SHIFT	8
-#define SSB_SPROM4_BFLHI		0x1046  /* Board Flags Hi */
-#define SSB_SPROM4_MAXP_BG		0x1080  /* Max Power BG in path 1 */
+#define SSB_SPROM4_TXPID2G01		0x0062 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G0		0x00FF
+#define  SSB_SPROM4_TXPID2G0_SHIFT	0
+#define  SSB_SPROM4_TXPID2G1		0xFF00
+#define  SSB_SPROM4_TXPID2G1_SHIFT	8
+#define SSB_SPROM4_TXPID2G23		0x0064 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G2		0x00FF
+#define  SSB_SPROM4_TXPID2G2_SHIFT	0
+#define  SSB_SPROM4_TXPID2G3		0xFF00
+#define  SSB_SPROM4_TXPID2G3_SHIFT	8
+#define SSB_SPROM4_TXPID5G01		0x0066 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G0		0x00FF
+#define  SSB_SPROM4_TXPID5G0_SHIFT	0
+#define  SSB_SPROM4_TXPID5G1		0xFF00
+#define  SSB_SPROM4_TXPID5G1_SHIFT	8
+#define SSB_SPROM4_TXPID5G23		0x0068 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G2		0x00FF
+#define  SSB_SPROM4_TXPID5G2_SHIFT	0
+#define  SSB_SPROM4_TXPID5G3		0xFF00
+#define  SSB_SPROM4_TXPID5G3_SHIFT	8
+#define SSB_SPROM4_TXPID5GL01		0x006A 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL0		0x00FF
+#define  SSB_SPROM4_TXPID5GL0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL1		0xFF00
+#define  SSB_SPROM4_TXPID5GL1_SHIFT	8
+#define SSB_SPROM4_TXPID5GL23		0x006C 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL2		0x00FF
+#define  SSB_SPROM4_TXPID5GL2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL3		0xFF00
+#define  SSB_SPROM4_TXPID5GL3_SHIFT	8
+#define SSB_SPROM4_TXPID5GH01		0x006E 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH0		0x00FF
+#define  SSB_SPROM4_TXPID5GH0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH1		0xFF00
+#define  SSB_SPROM4_TXPID5GH1_SHIFT	8
+#define SSB_SPROM4_TXPID5GH23		0x0070 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH2		0x00FF
+#define  SSB_SPROM4_TXPID5GH2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH3		0xFF00
+#define  SSB_SPROM4_TXPID5GH3_SHIFT	8
+#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
 #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
 #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
 #define  SSB_SPROM4_ITSSI_BG_SHIFT	8
-#define SSB_SPROM4_MAXP_A		0x108A  /* Max Power A in path 1 */
+#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
 #define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
 #define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
 #define  SSB_SPROM4_ITSSI_A_SHIFT	8
-#define SSB_SPROM4_GPIOA		0x1056	/* Gen. Purpose IO # 0 and 1 */
-#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
-#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
-#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
-#define SSB_SPROM4_GPIOB		0x1058	/* Gen. Purpose IO # 2 and 3 */
-#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
-#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
-#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
-#define SSB_SPROM4_PA0B0		0x1082	/* The paXbY locations are */
-#define SSB_SPROM4_PA0B1		0x1084	/*   only guesses */
-#define SSB_SPROM4_PA0B2		0x1086
-#define SSB_SPROM4_PA1B0		0x108E
-#define SSB_SPROM4_PA1B1		0x1090
-#define SSB_SPROM4_PA1B2		0x1092
+#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
+#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
+#define SSB_SPROM4_PA0B2		0x0086
+#define SSB_SPROM4_PA1B0		0x008E
+#define SSB_SPROM4_PA1B1		0x0090
+#define SSB_SPROM4_PA1B2		0x0092
 
 /* SPROM Revision 5 (inherits most data from rev 4) */
-#define SSB_SPROM5_BFLLO		0x104A	/* Boardflags (low 16 bits) */
-#define SSB_SPROM5_BFLHI		0x104C  /* Board Flags Hi */
-#define SSB_SPROM5_IL0MAC		0x1052	/* 6 byte MAC address for a/b/g/n */
-#define SSB_SPROM5_CCODE		0x1044	/* Country Code (2 bytes) */
-#define SSB_SPROM5_GPIOA		0x1076	/* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
+#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
+#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
+#define SSB_SPROM5_BFL2LO		0x004E	/* Board flags 2 (low 16 bits) */
+#define SSB_SPROM5_BFL2HI		0x0050	/* Board flags 2 Hi */
+#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
+#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
 #define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
 #define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
 #define  SSB_SPROM5_GPIOA_P1_SHIFT	8
-#define SSB_SPROM5_GPIOB		0x1078	/* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
 #define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
 #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
 #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
 
 /* SPROM Revision 8 */
-#define SSB_SPROM8_BFLLO		0x1084	/* Boardflags (low 16 bits) */
-#define SSB_SPROM8_BFLHI		0x1086	/* Boardflags Hi */
-#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
-#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
-#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
-#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
-#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
-#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
+#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
+#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
+#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
+#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
+#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
+#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
+#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
+#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
+#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
+#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
 #define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
 #define  SSB_SPROM8_AGAIN0_SHIFT	0
 #define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
 #define  SSB_SPROM8_AGAIN1_SHIFT	8
-#define SSB_SPROM8_AGAIN23		0x10A0
+#define SSB_SPROM8_AGAIN23		0x00A0
 #define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
 #define  SSB_SPROM8_AGAIN2_SHIFT	0
 #define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
 #define  SSB_SPROM8_AGAIN3_SHIFT	8
-#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
-#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
-#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
-#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
-#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
-#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
-#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
-#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
-#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power BG in path 1 */
-#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
+#define  SSB_SPROM8_RSSISMF2G		0x000F
+#define  SSB_SPROM8_RSSISMC2G		0x00F0
+#define  SSB_SPROM8_RSSISMC2G_SHIFT	4
+#define  SSB_SPROM8_RSSISAV2G		0x0700
+#define  SSB_SPROM8_RSSISAV2G_SHIFT	8
+#define  SSB_SPROM8_BXA2G		0x1800
+#define  SSB_SPROM8_BXA2G_SHIFT		11
+#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
+#define  SSB_SPROM8_RSSISMF5G		0x000F
+#define  SSB_SPROM8_RSSISMC5G		0x00F0
+#define  SSB_SPROM8_RSSISMC5G_SHIFT	4
+#define  SSB_SPROM8_RSSISAV5G		0x0700
+#define  SSB_SPROM8_RSSISAV5G_SHIFT	8
+#define  SSB_SPROM8_BXA5G		0x1800
+#define  SSB_SPROM8_BXA5G_SHIFT		11
+#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
+#define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
+#define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
+#define  SSB_SPROM8_TRI5G_SHIFT		8
+#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
+#define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
+#define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
+#define  SSB_SPROM8_TRI5GH_SHIFT	8
+#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
+#define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+#define  SSB_SPROM8_RXPO5G_SHIFT	8
+#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
 #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
 #define  SSB_SPROM8_ITSSI_BG_SHIFT	8
-#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power A in path 1 */
-#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
+#define SSB_SPROM8_PA0B1		0x00C4
+#define SSB_SPROM8_PA0B2		0x00C6
+#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
+#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
 #define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
 #define  SSB_SPROM8_ITSSI_A_SHIFT	8
+#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
+#define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
+#define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
+#define  SSB_SPROM8_MAXP_AL_SHIFT	8
+#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
+#define SSB_SPROM8_PA1B1		0x00CE
+#define SSB_SPROM8_PA1B2		0x00D0
+#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
+#define SSB_SPROM8_PA1LOB1		0x00D4
+#define SSB_SPROM8_PA1LOB2		0x00D6
+#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
+#define SSB_SPROM8_PA1HIB1		0x00DA
+#define SSB_SPROM8_PA1HIB2		0x00DC
+#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
+#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
+#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
 
 /* Values for SSB_SPROM1_BINF_CCODE */
 enum {