openwrt/target/linux/bcm27xx/patches-6.6/950-0536-dmaengine-dw-axi-dmac-Fixes-for-RP1.patch
Álvaro Fernández Rojas 8c405cdccc bcm27xx: add 6.6 kernel patches
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.34..rpi-6.1.y

Some patches needed rebasing and, as usual, the applied and reverted, wireless
drivers, Github workflows, READMEs and defconfigs patches were removed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 18:52:49 +02:00

329 lines
10 KiB
Diff

From c6cd3e6878e32548ea90c4160c534e952221c194 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 28 Apr 2021 17:46:01 +0100
Subject: [PATCH 0536/1085] dmaengine: dw-axi-dmac: Fixes for RP1
Don't assume that DMA addresses of devices are the same as their
physical addresses - convert correctly.
The CFG2 register layout is used when there are more than 8 channels,
but also when configured for more than 16 target peripheral devices
because the index of the handshake signal has to be made wider.
Reset the DMAC on probe
The driver goes to the trouble of tracking when transfers have been
paused, but then doesn't report that state when queried.
Not having APB registers is not an error - for most use cases it's
not even of interest, it's expected. Demote the message to debug level,
which is disabled by default.
Each channel has a descriptor pool, which is shared between transfers.
It is unsafe to treat the total number of descriptors allocated from a
pool as the number allocated to a specific transfer; doing so leads
to releasing buffers that shouldn't be released and walking off the
ends of descriptor lists. Instead, give each transfer descriptor its
own count.
Support partial transfers:
Some use cases involve streaming from a device where the transfer only
proceeds when the device's FIFO occupancy exceeds a certain threshold.
In such cases (e.g. when pulling data from a UART) it is important to
know how much data has been transferred so far, in order that remaining
bytes can be read from the FIFO directly by software.
Add the necessary code to provide this "residue" value with a finer,
sub-transfer granularity.
In order to prevent the occasional byte getting stuck in the DMA
controller's internal buffers, restrict the destination memory width
to the source register width.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 132 +++++++++++++++---
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 1 +
2 files changed, 113 insertions(+), 20 deletions(-)
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -12,6 +12,7 @@
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/dmapool.h>
+#include <linux/dma-direct.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/interrupt.h>
@@ -84,6 +85,17 @@ axi_chan_iowrite64(struct axi_dma_chan *
iowrite32(upper_32_bits(val), chan->chan_regs + reg + 4);
}
+static inline u64
+axi_chan_ioread64(struct axi_dma_chan *chan, u32 reg)
+{
+ /*
+ * We split one 64 bit read into two 32 bit reads as some HW doesn't
+ * support 64 bit access.
+ */
+ return ((u64)ioread32(chan->chan_regs + reg + 4) << 32) +
+ ioread32(chan->chan_regs + reg);
+}
+
static inline void axi_chan_config_write(struct axi_dma_chan *chan,
struct axi_dma_chan_config *config)
{
@@ -220,7 +232,18 @@ static void axi_dma_hw_init(struct axi_d
{
int ret;
u32 i;
+ int retries = 1000;
+ axi_dma_iowrite32(chip, DMAC_RESET, 1);
+ while (axi_dma_ioread32(chip, DMAC_RESET)) {
+ retries--;
+ if (!retries) {
+ dev_err(chip->dev, "%s: DMAC failed to reset\n",
+ __func__);
+ return;
+ }
+ cpu_relax();
+ }
for (i = 0; i < chip->dw->hdata->nr_channels; i++) {
axi_chan_irq_disable(&chip->dw->chan[i], DWAXIDMAC_IRQ_ALL);
axi_chan_disable(&chip->dw->chan[i]);
@@ -282,7 +305,7 @@ static struct axi_dma_lli *axi_desc_get(
static void axi_desc_put(struct axi_dma_desc *desc)
{
struct axi_dma_chan *chan = desc->chan;
- int count = atomic_read(&chan->descs_allocated);
+ u32 count = desc->hw_desc_count;
struct axi_dma_hw_desc *hw_desc;
int descs_put;
@@ -304,6 +327,48 @@ static void vchan_desc_put(struct virt_d
axi_desc_put(vd_to_axi_desc(vdesc));
}
+static u32 axi_dma_desc_src_pos(struct axi_dma_desc *desc, dma_addr_t addr)
+{
+ unsigned int idx = 0;
+ u32 pos = 0;
+
+ while (pos < desc->length) {
+ struct axi_dma_hw_desc *hw_desc = &desc->hw_desc[idx++];
+ u32 len = hw_desc->len;
+ dma_addr_t start = le64_to_cpu(hw_desc->lli->sar);
+
+ if (addr >= start && addr <= (start + len)) {
+ pos += addr - start;
+ break;
+ }
+
+ pos += len;
+ }
+
+ return pos;
+}
+
+static u32 axi_dma_desc_dst_pos(struct axi_dma_desc *desc, dma_addr_t addr)
+{
+ unsigned int idx = 0;
+ u32 pos = 0;
+
+ while (pos < desc->length) {
+ struct axi_dma_hw_desc *hw_desc = &desc->hw_desc[idx++];
+ u32 len = hw_desc->len;
+ dma_addr_t start = le64_to_cpu(hw_desc->lli->dar);
+
+ if (addr >= start && addr <= (start + len)) {
+ pos += addr - start;
+ break;
+ }
+
+ pos += len;
+ }
+
+ return pos;
+}
+
static enum dma_status
dma_chan_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
struct dma_tx_state *txstate)
@@ -313,10 +378,7 @@ dma_chan_tx_status(struct dma_chan *dcha
enum dma_status status;
u32 completed_length;
unsigned long flags;
- u32 completed_blocks;
size_t bytes = 0;
- u32 length;
- u32 len;
status = dma_cookie_status(dchan, cookie, txstate);
if (status == DMA_COMPLETE || !txstate)
@@ -325,16 +387,31 @@ dma_chan_tx_status(struct dma_chan *dcha
spin_lock_irqsave(&chan->vc.lock, flags);
vdesc = vchan_find_desc(&chan->vc, cookie);
- if (vdesc) {
- length = vd_to_axi_desc(vdesc)->length;
- completed_blocks = vd_to_axi_desc(vdesc)->completed_blocks;
- len = vd_to_axi_desc(vdesc)->hw_desc[0].len;
- completed_length = completed_blocks * len;
- bytes = length - completed_length;
+ if (vdesc && vdesc == vchan_next_desc(&chan->vc)) {
+ /* This descriptor is in-progress */
+ struct axi_dma_desc *desc = vd_to_axi_desc(vdesc);
+ dma_addr_t addr;
+
+ if (chan->direction == DMA_MEM_TO_DEV) {
+ addr = axi_chan_ioread64(chan, CH_SAR);
+ completed_length = axi_dma_desc_src_pos(desc, addr);
+ } else if (chan->direction == DMA_DEV_TO_MEM) {
+ addr = axi_chan_ioread64(chan, CH_DAR);
+ completed_length = axi_dma_desc_dst_pos(desc, addr);
+ } else {
+ completed_length = 0;
+ }
+ bytes = desc->length - completed_length;
+ } else if (vdesc) {
+ /* Still in the queue so not started */
+ bytes = vd_to_axi_desc(vdesc)->length;
}
- spin_unlock_irqrestore(&chan->vc.lock, flags);
+ if (chan->is_paused && status == DMA_IN_PROGRESS)
+ status = DMA_PAUSED;
+
dma_set_residue(txstate, bytes);
+ spin_unlock_irqrestore(&chan->vc.lock, flags);
return status;
}
@@ -522,7 +599,7 @@ static void dw_axi_dma_set_hw_channel(st
unsigned long reg_value, val;
if (!chip->apb_regs) {
- dev_err(chip->dev, "apb_regs not initialized\n");
+ dev_dbg(chip->dev, "apb_regs not initialized\n");
return;
}
@@ -626,18 +703,25 @@ static int dw_axi_dma_set_hw_desc(struct
switch (chan->direction) {
case DMA_MEM_TO_DEV:
reg_width = __ffs(chan->config.dst_addr_width);
- device_addr = chan->config.dst_addr;
+ device_addr = phys_to_dma(chan->chip->dev, chan->config.dst_addr);
ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
mem_width << CH_CTL_L_SRC_WIDTH_POS |
+ DWAXIDMAC_BURST_TRANS_LEN_1 << CH_CTL_L_DST_MSIZE_POS |
+ DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS |
DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
block_ts = len >> mem_width;
break;
case DMA_DEV_TO_MEM:
reg_width = __ffs(chan->config.src_addr_width);
- device_addr = chan->config.src_addr;
+ /* Prevent partial access units getting lost */
+ if (mem_width > reg_width)
+ mem_width = reg_width;
+ device_addr = phys_to_dma(chan->chip->dev, chan->config.src_addr);
ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
mem_width << CH_CTL_L_DST_WIDTH_POS |
+ DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
+ DWAXIDMAC_BURST_TRANS_LEN_1 << CH_CTL_L_SRC_MSIZE_POS |
DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
block_ts = len >> reg_width;
@@ -673,9 +757,6 @@ static int dw_axi_dma_set_hw_desc(struct
}
hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
-
- ctllo |= DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
- DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS;
hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
set_desc_src_master(hw_desc);
@@ -770,6 +851,8 @@ dw_axi_dma_chan_prep_cyclic(struct dma_c
src_addr += segment_len;
}
+ desc->hw_desc_count = total_segments;
+
llp = desc->hw_desc[0].llp;
/* Managed transfer list */
@@ -849,6 +932,8 @@ dw_axi_dma_chan_prep_slave_sg(struct dma
} while (len >= segment_len);
}
+ desc->hw_desc_count = loop;
+
/* Set end-of-link to the last link descriptor of list */
set_desc_last(&desc->hw_desc[num_sgs - 1]);
@@ -956,6 +1041,8 @@ dma_chan_prep_dma_memcpy(struct dma_chan
num++;
}
+ desc->hw_desc_count = num;
+
/* Set end-of-link to the last link descriptor of list */
set_desc_last(&desc->hw_desc[num - 1]);
/* Managed transfer list */
@@ -1004,7 +1091,7 @@ static void axi_chan_dump_lli(struct axi
static void axi_chan_list_dump_lli(struct axi_dma_chan *chan,
struct axi_dma_desc *desc_head)
{
- int count = atomic_read(&chan->descs_allocated);
+ u32 count = desc_head->hw_desc_count;
int i;
for (i = 0; i < count; i++)
@@ -1047,11 +1134,11 @@ out:
static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
{
- int count = atomic_read(&chan->descs_allocated);
struct axi_dma_hw_desc *hw_desc;
struct axi_dma_desc *desc;
struct virt_dma_desc *vd;
unsigned long flags;
+ u32 count;
u64 llp;
int i;
@@ -1073,6 +1160,7 @@ static void axi_chan_block_xfer_complete
if (chan->cyclic) {
desc = vd_to_axi_desc(vd);
if (desc) {
+ count = desc->hw_desc_count;
llp = lo_hi_readq(chan->chan_regs + CH_LLP);
for (i = 0; i < count; i++) {
hw_desc = &desc->hw_desc[i];
@@ -1325,6 +1413,10 @@ static int parse_device_properties(struc
chip->dw->hdata->nr_masters = tmp;
+ ret = device_property_read_u32(dev, "snps,dma-targets", &tmp);
+ if (!ret && tmp > 16)
+ chip->dw->hdata->use_cfg2 = true;
+
ret = device_property_read_u32(dev, "snps,data-width", &tmp);
if (ret)
return ret;
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -101,6 +101,7 @@ struct axi_dma_desc {
struct virt_dma_desc vd;
struct axi_dma_chan *chan;
+ u32 hw_desc_count;
u32 completed_blocks;
u32 length;
u32 period_len;