ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 14:13:16 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
31e45f62ca
openwrt/target/linux/realtek/image/rtl838x.mk
Markus Stockhausen d03f3dcf3b realtek: add support for Linksys LGS310C 
Hardware specification
----------------------

* RTL8380M SoC, 1 MIPS 4KEc core @ 500MHz
* 256MB DRAM
* 32MB NOR Flash
* 8 x 10/100/1000BASE-T ports
* 2 x SFP ports
* Power LED, Fault LED
* Reset button on front panel
* UART (115200 8N1) via populated standard pin header marked JP1

TODO: The SFP ports use a shared SCL GPIO that the driver cannot handle.
The left SFP port (lan9) is defined and fully functional while the laser
on the right SFP port (lan10) is off by default.

UART pinout
-----------

[o]ooo|JP1
 | ||`------ GND
 | |`------- RX
 | `-------- TX
 `---------- Vcc (3V3)

Installation using OEM webinterface
-----------------------------------

1. Make sure you are running OEM firmware in secondary slot
2. Install squashfs-factory.imag to primary slot by upload via http

Installation using serial interface
-----------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load image with "upgrade runtime <TFTP IP>:squashfs-sysupgrade.bin" command
3. Switch to primary slot with "setsys bootpartition 0"
4. Store config with "savesys"
5. Boot the image with `boota` command

Dual-boot with stock firmware using writable u-boot-env
-------------------------------------------------------

From stock to OpenWrt / primary image 1 (CLI as admin):
   - > boot system image1
   - > reboot

From OpenWrt to stock / boot image 2: (shell as root)
   - # fw_setsys bootpartition 1
   - # reboot

Debrick using serial interface
------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load vendor image with "upgrade runtime <TFTP IP>:LGS310xxxxx.imag"
3. switch to primary partition "setsys bootpartition 0"
4. safe config "savesys"

Further documentation
---------------------
See https://openwrt.org/toh/linksys/lgs352c

It has been developed and tested on device with v1 revision.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16068
[Add missing 'w' in name of firmware partition]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2024-10-02 20:15:21 +02:00

419 lines
9.3 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
include ./common.mk
define Device/allnet_all-sg8208m
SOC := rtl8382
IMAGE_SIZE := 7168k
DEVICE_VENDOR := ALLNET
DEVICE_MODEL := ALL-SG8208M
UIMAGE_MAGIC := 0x00000006
UIMAGE_NAME := 2.2.2.0
endef
TARGET_DEVICES += allnet_all-sg8208m
define Device/apresia_aplgs120gtss
$(Device/cameo-fw)
SOC := rtl8382
IMAGE_SIZE := 14848k
DEVICE_VENDOR := APRESIA
DEVICE_MODEL := ApresiaLightGS120GT-SS
UIMAGE_MAGIC := 0x12345000
CAMEO_KERNEL_PART_SIZE := 1572864
CAMEO_KERNEL_PART := 3
CAMEO_ROOTFS_PART := 4
CAMEO_CUSTOMER_SIGNATURE := 2
CAMEO_BOARD_MODEL := APLGS120GTSS
CAMEO_BOARD_VERSION := 4
endef
TARGET_DEVICES += apresia_aplgs120gtss
define Device/d-link_dgs-1210-10mp-f
$(Device/d-link_dgs-1210)
SOC := rtl8380
DEVICE_MODEL := DGS-1210-10MP
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += d-link_dgs-1210-10mp-f
define Device/d-link_dgs-1210-10p
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-10P
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += d-link_dgs-1210-10p
define Device/d-link_dgs-1210-16
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-16
endef
TARGET_DEVICES += d-link_dgs-1210-16
define Device/d-link_dgs-1210-20
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-20
endef
TARGET_DEVICES += d-link_dgs-1210-20
define Device/d-link_dgs-1210-28
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28
endef
TARGET_DEVICES += d-link_dgs-1210-28
define Device/d-link_dgs-1210-28mp-f
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28MP
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe kmod-hwmon-lm63
endef
TARGET_DEVICES += d-link_dgs-1210-28mp-f
define Device/d-link_dgs-1210-28p-f
$(Device/d-link_dgs-1210)
SOC := rtl8382
DEVICE_MODEL := DGS-1210-28P
DEVICE_VARIANT := F
DEVICE_PACKAGES += realtek-poe kmod-hwmon-lm63
endef
TARGET_DEVICES += d-link_dgs-1210-28p-f
# The "IMG-" uImage name allows flashing the iniramfs from the vendor Web UI.
# Avoided for sysupgrade, as the vendor FW would do an incomplete flash.
define Device/engenius_ews2910p
SOC := rtl8380
IMAGE_SIZE := 8192k
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EWS2910P
DEVICE_PACKAGES += realtek-poe
UIMAGE_MAGIC := 0x03802910
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
libdeflate-gzip | \
uImage gzip -n 'IMG-0.00.00-c0.0.00'
endef
TARGET_DEVICES += engenius_ews2910p
define Device/hpe_1920-8g
$(Device/hpe_1920)
SOC := rtl8380
DEVICE_MODEL := 1920-8G (JG920A)
H3C_DEVICE_ID := 0x00010023
endef
TARGET_DEVICES += hpe_1920-8g
define Device/hpe_1920-8g-poe-65w
$(Device/hpe_1920)
SOC := rtl8380
DEVICE_MODEL := 1920-8G-PoE+ 65W (JG921A)
DEVICE_PACKAGES += realtek-poe
H3C_DEVICE_ID := 0x00010024
endef
TARGET_DEVICES += hpe_1920-8g-poe-65w
define Device/hpe_1920-8g-poe-180w
$(Device/hpe_1920)
SOC := rtl8380
DEVICE_MODEL := 1920-8G-PoE+ 180W (JG922A)
DEVICE_PACKAGES += realtek-poe
H3C_DEVICE_ID := 0x00010025
SUPPORTED_DEVICES += hpe_1920-8g-poe
endef
TARGET_DEVICES += hpe_1920-8g-poe-180w
define Device/hpe_1920-16g
$(Device/hpe_1920)
SOC := rtl8382
DEVICE_MODEL := 1920-16G (JG923A)
H3C_DEVICE_ID := 0x00010026
endef
TARGET_DEVICES += hpe_1920-16g
define Device/hpe_1920-24g
$(Device/hpe_1920)
SOC := rtl8382
DEVICE_MODEL := 1920-24G (JG924A)
H3C_DEVICE_ID := 0x00010027
endef
TARGET_DEVICES += hpe_1920-24g
define Device/inaba_aml2-17gp
SOC := rtl8382
IMAGE_SIZE := 13504k
DEVICE_VENDOR := INABA
DEVICE_MODEL := Abaniact AML2-17GP
UIMAGE_MAGIC := 0x83800000
endef
TARGET_DEVICES += inaba_aml2-17gp
define Device/iodata_bsh-g24mb
SOC := rtl8382
IMAGE_SIZE := 13696k
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := BSH-G24MB
UIMAGE_MAGIC := 0x83800013
endef
TARGET_DEVICES += iodata_bsh-g24mb
define Device/linksys_lgs310c
SOC := rtl8380
IMAGE_SIZE := 13504k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := LGS310C
BELKIN_MODEL := BKS-RTL83xx
BELKIN_HEADER := 0x07800001
LINKSYS_MODEL := 60402060
IMAGES += factory.imag
IMAGE/factory.imag := \
append-kernel | \
pad-to 64k | \
append-rootfs | \
pad-rootfs | \
check-size | \
append-metadata | \
linksys-image | \
belkin-header
endef
TARGET_DEVICES += linksys_lgs310c
# "NGE" refers to the uImage magic
define Device/netgear_nge
KERNEL := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
SOC := rtl8380
IMAGE_SIZE := 14848k
UIMAGE_MAGIC := 0x4e474520
UIMAGE_NAME := 9.9.9.9
DEVICE_VENDOR := NETGEAR
endef
# "NGG" refers to the uImage magic
define Device/netgear_ngg
KERNEL := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
KERNEL_INITRAMFS := \
kernel-bin | \
append-dtb | \
lzma | \
uImage lzma
SOC := rtl8380
IMAGE_SIZE := 14848k
UIMAGE_MAGIC := 0x4e474720
DEVICE_VENDOR := NETGEAR
endef
define Device/netgear_gs108t-v3
$(Device/netgear_nge)
DEVICE_MODEL := GS108T
DEVICE_VARIANT := v3
endef
TARGET_DEVICES += netgear_gs108t-v3
define Device/netgear_gs110tpp-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS110TPP
DEVICE_VARIANT := v1
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += netgear_gs110tpp-v1
define Device/netgear_gs110tup-v1
$(Device/netgear_ngg)
DEVICE_MODEL := GS110TUP
DEVICE_VARIANT := v1
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += netgear_gs110tup-v1
define Device/netgear_gs308t-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS308T
DEVICE_VARIANT := v1
UIMAGE_MAGIC := 0x4e474335
endef
TARGET_DEVICES += netgear_gs308t-v1
define Device/netgear_gs310tp-v1
$(Device/netgear_nge)
DEVICE_MODEL := GS310TP
DEVICE_VARIANT := v1
UIMAGE_MAGIC := 0x4e474335
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += netgear_gs310tp-v1
define Device/panasonic_m16eg-pn28160k
SOC := rtl8382
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M16eG
DEVICE_VARIANT := PN28160K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m16eg-pn28160k
define Device/panasonic_m24eg-pn28240k
SOC := rtl8382
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M24eG
DEVICE_VARIANT := PN28240K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m24eg-pn28240k
define Device/panasonic_m8eg-pn28080k
SOC := rtl8380
IMAGE_SIZE := 16384k
DEVICE_VENDOR := Panasonic
DEVICE_MODEL := Switch-M8eG
DEVICE_VARIANT := PN28080K
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
endef
TARGET_DEVICES += panasonic_m8eg-pn28080k
define Device/tplink_sg2008p-v1
SOC := rtl8380
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := SG2008P
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-hwmon-tps23861
endef
TARGET_DEVICES += tplink_sg2008p-v1
define Device/tplink_sg2210p-v3
SOC := rtl8380
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := SG2210P
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-hwmon-tps23861
endef
TARGET_DEVICES += tplink_sg2210p-v3
define Device/tplink_t1600g-28ts-v3
SOC := rtl8382
KERNEL_SIZE := 6m
IMAGE_SIZE := 26m
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := T1600G-28TS
DEVICE_VARIANT := v3
endef
TARGET_DEVICES += tplink_t1600g-28ts-v3
define Device/zyxel_gs1900-10hp
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-10HP
ZYXEL_VERS := AAZI
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-10hp
define Device/zyxel_gs1900-16
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-16
ZYXEL_VERS := AAHJ
endef
TARGET_DEVICES += zyxel_gs1900-16
define Device/zyxel_gs1900-8
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8
DEVICE_VARIANT := v1
DEVICE_ALT0_VENDOR := Zyxel
DEVICE_ALT0_MODEL := GS1900-8
DEVICE_ALT0_VARIANT := v2
ZYXEL_VERS := AAHH
endef
TARGET_DEVICES += zyxel_gs1900-8
define Device/zyxel_gs1900-8hp-v1
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8HP
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHI
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-8hp-v1
define Device/zyxel_gs1900-8hp-v2
$(Device/zyxel_gs1900)
SOC := rtl8380
DEVICE_MODEL := GS1900-8HP
DEVICE_VARIANT := v2
ZYXEL_VERS := AAHI
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-8hp-v2
define Device/zyxel_gs1900-24-v1
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHL
endef
TARGET_DEVICES += zyxel_gs1900-24-v1
define Device/zyxel_gs1900-24e
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24E
ZYXEL_VERS := AAHK
endef
TARGET_DEVICES += zyxel_gs1900-24e
define Device/zyxel_gs1900-24ep
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24EP
ZYXEL_VERS := ABTO
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-24ep
define Device/zyxel_gs1900-24hp-v1
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24HP
DEVICE_VARIANT := v1
ZYXEL_VERS := AAHM
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-24hp-v1
define Device/zyxel_gs1900-24hp-v2
$(Device/zyxel_gs1900)
SOC := rtl8382
DEVICE_MODEL := GS1900-24HP
DEVICE_VARIANT := v2
ZYXEL_VERS := ABTP
DEVICE_PACKAGES += realtek-poe
endef
TARGET_DEVICES += zyxel_gs1900-24hp-v2
Reference in New Issue View Git Blame Copy Permalink