mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
c9536520bd
Backport of Ansuel Smith's "net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled", to ensure mac06 is disabled even if enabled by the bootloader. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
48 lines
1.8 KiB
Diff
48 lines
1.8 KiB
Diff
From 5f15d392dcb4aa250a63d6f2c5adfc26c0aedc78 Mon Sep 17 00:00:00 2001
|
|
From: Ansuel Smith <ansuelsmth@gmail.com>
|
|
Date: Tue, 2 Nov 2021 19:30:41 +0100
|
|
Subject: net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled
|
|
|
|
Some device set MAC06 exchange in the bootloader. This cause some
|
|
problem as we don't support this strange mode and we just set the port6
|
|
as the primary CPU port. With MAC06 exchange, PAD0 reg configure port6
|
|
instead of port0. Add an extra check and explicitly disable MAC06 exchange
|
|
to correctly configure the port PAD config.
|
|
|
|
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|
Fixes: 3fcf734aa482 ("net: dsa: qca8k: add support for cpu port 6")
|
|
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/dsa/qca8k.c | 8 ++++++++
|
|
drivers/net/dsa/qca8k.h | 1 +
|
|
2 files changed, 9 insertions(+)
|
|
|
|
--- a/drivers/net/dsa/qca8k.c
|
|
+++ b/drivers/net/dsa/qca8k.c
|
|
@@ -1109,6 +1109,14 @@ qca8k_setup(struct dsa_switch *ds)
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ /* Make sure MAC06 is disabled */
|
|
+ ret = qca8k_reg_clear(priv, QCA8K_REG_PORT0_PAD_CTRL,
|
|
+ QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
|
|
+ if (ret) {
|
|
+ dev_err(priv->dev, "failed disabling MAC06 exchange");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
/* Enable CPU Port */
|
|
ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
|
|
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
|
|
--- a/drivers/net/dsa/qca8k.h
|
|
+++ b/drivers/net/dsa/qca8k.h
|
|
@@ -34,6 +34,7 @@
|
|
#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8)
|
|
#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8)
|
|
#define QCA8K_REG_PORT0_PAD_CTRL 0x004
|
|
+#define QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN BIT(31)
|
|
#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19)
|
|
#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18)
|
|
#define QCA8K_REG_PORT5_PAD_CTRL 0x008
|