mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
f1525e785e
Backport below changes for GigaDevice GD25Q256 support from v4.15: e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info 65153846b18c mtd: spi-nor: add support for GD25Q256 This chip is used on newer Quad-E4G boards. Before: [ 2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19 [ 2.372853] m25p80: probe of spi0.0 failed with error -2 After: [ 2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes) [ 2.376694] 5 fixed-partitions partitions found on MTD device spi0.0 [ 2.383043] Creating 5 MTD partitions on "spi0.0": [ 2.387824] 0x000000000000-0x000000030000 : "u-boot" [ 2.394138] 0x000000030000-0x000000031000 : "u-boot-env" [ 2.400608] 0x000000031000-0x000000040000 : "config" [ 2.406830] 0x000000040000-0x000000050000 : "factory" [ 2.413169] 0x000000050000-0x000002000000 : "firmware" Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
48 lines
1.7 KiB
Diff
48 lines
1.7 KiB
Diff
From e27072851bf7d706c592fc528549b52023b17a09 Mon Sep 17 00:00:00 2001
|
|
From: Andy Yan <andy.yan@rock-chips.com>
|
|
Date: Mon, 28 Aug 2017 09:58:29 +0800
|
|
Subject: [PATCH 1/2] mtd: spi-nor: add a quad_enable callback in struct
|
|
flash_info
|
|
|
|
Some manufacturers may use different bit to set QE on different
|
|
memories.
|
|
|
|
The GD25Q256 from GigaDevice is an example, which uses S6(bit 6
|
|
of the Status Register-1) to set QE, which is different with
|
|
other supported memories from GigaDevice that use S9(bit 1 of
|
|
the Status Register-2). This makes it is impossible to select
|
|
the quad enable method by distinguishing the MFR. This patch
|
|
introduce a quad_enable function which can be set per memory
|
|
in the flash_info list table.
|
|
|
|
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
|
|
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
|
|
|
|
--- a/drivers/mtd/spi-nor/spi-nor.c
|
|
+++ b/drivers/mtd/spi-nor/spi-nor.c
|
|
@@ -89,6 +89,8 @@ struct flash_info {
|
|
#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
|
|
#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
|
|
#define USE_CLSR BIT(14) /* use CLSR command */
|
|
+
|
|
+ int (*quad_enable)(struct spi_nor *nor);
|
|
};
|
|
|
|
#define JEDEC_MFR(info) ((info)->id[0])
|
|
@@ -2433,6 +2435,15 @@ static int spi_nor_init_params(struct sp
|
|
params->quad_enable = spansion_quad_enable;
|
|
break;
|
|
}
|
|
+
|
|
+ /*
|
|
+ * Some manufacturer like GigaDevice may use different
|
|
+ * bit to set QE on different memories, so the MFR can't
|
|
+ * indicate the quad_enable method for this case, we need
|
|
+ * set it in flash info list.
|
|
+ */
|
|
+ if (info->quad_enable)
|
|
+ params->quad_enable = info->quad_enable;
|
|
}
|
|
|
|
/* Override the parameters with data read from SFDP tables. */
|