mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-31 00:24:12 +00:00
301301da2b
The kernel will detect if the host supports this, so we can just enable it in the kernel config. Tested on an APU2 with AES-NI support and a KVM VM on a Xeon E5520 host without AES-NI support. Throughput over an IPsec tunnel between these 2 hosts increased from ~63Mbps to ~140Mbps. Ciphers: AES_GCM_16_256/PRF_HMAC_SHA2_512/ECP_521. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org