mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
d55c087390
The TP-Link RTL83xx based switches have their MAC address programmed in the "para" partition. While in theory, the format of this partition is dynamic, in practice, the MAC address appears to be located at a consistent address. Thus, use nvmem-cells to read this MAC address. The main MAC is required for deriving the MAC address of the switch ports. Instead of reading it via mtd_get_mac_binary(), alias the ethernet0 node as the label-mac-device, and use get_mac_label(). Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
423 lines
8.2 KiB
Plaintext
423 lines
8.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "rtl839x.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "tplink,sg2452p-v4", "realtek,rtl8393-soc";
|
|
model = "TP-Link SG2452P v4";
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x10000000>;
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &led_sys;
|
|
led-failsafe = &led_sys;
|
|
led-running = &led_sys;
|
|
led-upgrade = &led_sys;
|
|
label-mac-device = ðernet0;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,38400";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
speed {
|
|
label = "speed";
|
|
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
};
|
|
|
|
gpio_fan_sys {
|
|
compatible = "gpio-fan";
|
|
alarm-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
gpio_fan_psu_1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&disable_jtag>;
|
|
compatible = "gpio-fan";
|
|
|
|
alarm-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
|
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
|
|
/* the actual speeds (rpm) are unknown, just use dummy values */
|
|
gpio-fan,speed-map = <1 0>, <2 1>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
gpio_fan_psu_2 {
|
|
/* This fan runs in parallel to PSU1 fan, but has a separate
|
|
* alarm GPIO. This is not (yet) supported by the gpio-fan driver,
|
|
* so a separate instance is added
|
|
*/
|
|
compatible = "gpio-fan";
|
|
alarm-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "green:speed";
|
|
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
};
|
|
|
|
led-1 {
|
|
label = "green:poe";
|
|
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
};
|
|
|
|
led_sys: led-2 {
|
|
label = "green:sys";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
|
|
led-3 {
|
|
label = "green:fan";
|
|
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
|
|
led-4 {
|
|
label = "amber:fan";
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = "fault-fan";
|
|
};
|
|
|
|
led-5 {
|
|
label = "green:poe-max";
|
|
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = "alarm-poe";
|
|
};
|
|
};
|
|
|
|
i2c-gpio-0 {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&gpio0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* LAN9 - LAN12 */
|
|
tps23861@5 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x05>;
|
|
};
|
|
|
|
/* LAN17 - LAN20 */
|
|
tps23861@6 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x06>;
|
|
};
|
|
|
|
/* LAN45 - LAN48 */
|
|
tps23861@9 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x09>;
|
|
};
|
|
|
|
/* LAN37 - LAN40 */
|
|
tps23861@a {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x0a>;
|
|
};
|
|
|
|
/* LAN1 - LAN4 */
|
|
tps23861@14 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x14>;
|
|
};
|
|
|
|
/* LAN25 - LAN28 */
|
|
tps23861@24 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x24>;
|
|
};
|
|
|
|
/* LAN33 - LAN 36 */
|
|
tps23861@25 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x25>;
|
|
};
|
|
|
|
/* LAN41 - LAN44 */
|
|
tps23861@26 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x26>;
|
|
};
|
|
|
|
/* LAN13 - LAN16 */
|
|
tps23861@29 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x29>;
|
|
};
|
|
|
|
/* LAN29 - LAN32 */
|
|
tps23861@2c {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x2c>;
|
|
};
|
|
|
|
/* LAN5 - LAN8 */
|
|
tps23861@48 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x48>;
|
|
};
|
|
|
|
/* LAN21 - LAN24 */
|
|
tps23861@49 {
|
|
compatible = "ti,tps23861";
|
|
reg = <0x49>;
|
|
};
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&gpio0 {
|
|
poe-enable {
|
|
gpio-hog;
|
|
gpios = <23 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "poe-enable";
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0xe0000>;
|
|
read-only;
|
|
};
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0xe0000 0x20000>;
|
|
};
|
|
|
|
/* We use the "sys", "usrimg1" and "usrimg2" partitions
|
|
* as firmware since the kernel needs to be in "sys", but the
|
|
* partition is too small to hold the "rootfs" as well.
|
|
* The original partition map contains:
|
|
*
|
|
* partition@100000 {
|
|
* label = "sys";
|
|
* reg = <0x100000 0x600000>;
|
|
* };
|
|
* partition@700000 {
|
|
* label = "usrimg1";
|
|
* reg = <0x700000 0xa00000>;
|
|
* };
|
|
* partition@1100000 {
|
|
* label = "usrimg2";
|
|
* reg = <0x1100000 0xa00000>;
|
|
* };
|
|
*/
|
|
|
|
partition@100000 {
|
|
label = "firmware";
|
|
reg = <0x100000 0x1a00000>;
|
|
};
|
|
partition@1b00000 {
|
|
label = "usrappfs";
|
|
reg = <0x1b00000 0x400000>;
|
|
};
|
|
partition@1f00000 {
|
|
compatible = "nvmem-cells";
|
|
label = "para";
|
|
reg = <0x1f00000 0x100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
read-only;
|
|
|
|
factory_macaddr: macaddr@fdff4 {
|
|
reg = <0xfdff4 0x6>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ðernet0 {
|
|
nvmem-cells = <&factory_macaddr>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
mdio: mdio-bus {
|
|
compatible = "realtek,rtl838x-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* External phy RTL8218B #1 */
|
|
EXTERNAL_PHY(0)
|
|
EXTERNAL_PHY(1)
|
|
EXTERNAL_PHY(2)
|
|
EXTERNAL_PHY(3)
|
|
EXTERNAL_PHY(4)
|
|
EXTERNAL_PHY(5)
|
|
EXTERNAL_PHY(6)
|
|
EXTERNAL_PHY(7)
|
|
|
|
/* External phy RTL8218B #2 */
|
|
EXTERNAL_PHY(8)
|
|
EXTERNAL_PHY(9)
|
|
EXTERNAL_PHY(10)
|
|
EXTERNAL_PHY(11)
|
|
EXTERNAL_PHY(12)
|
|
EXTERNAL_PHY(13)
|
|
EXTERNAL_PHY(14)
|
|
EXTERNAL_PHY(15)
|
|
|
|
/* External phy RTL8218B #3 */
|
|
EXTERNAL_PHY(16)
|
|
EXTERNAL_PHY(17)
|
|
EXTERNAL_PHY(18)
|
|
EXTERNAL_PHY(19)
|
|
EXTERNAL_PHY(20)
|
|
EXTERNAL_PHY(21)
|
|
EXTERNAL_PHY(22)
|
|
EXTERNAL_PHY(23)
|
|
|
|
/* External phy RTL8218B #4 */
|
|
EXTERNAL_PHY(24)
|
|
EXTERNAL_PHY(25)
|
|
EXTERNAL_PHY(26)
|
|
EXTERNAL_PHY(27)
|
|
EXTERNAL_PHY(28)
|
|
EXTERNAL_PHY(29)
|
|
EXTERNAL_PHY(30)
|
|
EXTERNAL_PHY(31)
|
|
|
|
/* External phy RTL8218B #5 */
|
|
EXTERNAL_PHY(32)
|
|
EXTERNAL_PHY(33)
|
|
EXTERNAL_PHY(34)
|
|
EXTERNAL_PHY(35)
|
|
EXTERNAL_PHY(36)
|
|
EXTERNAL_PHY(37)
|
|
EXTERNAL_PHY(38)
|
|
EXTERNAL_PHY(39)
|
|
|
|
/* External phy RTL8218B #6 */
|
|
EXTERNAL_PHY(40)
|
|
EXTERNAL_PHY(41)
|
|
EXTERNAL_PHY(42)
|
|
EXTERNAL_PHY(43)
|
|
EXTERNAL_PHY(44)
|
|
EXTERNAL_PHY(45)
|
|
EXTERNAL_PHY(46)
|
|
EXTERNAL_PHY(47)
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
SWITCH_PORT(0, 01, qsgmii)
|
|
SWITCH_PORT(1, 02, qsgmii)
|
|
SWITCH_PORT(2, 03, qsgmii)
|
|
SWITCH_PORT(3, 04, qsgmii)
|
|
SWITCH_PORT(4, 05, qsgmii)
|
|
SWITCH_PORT(5, 06, qsgmii)
|
|
SWITCH_PORT(6, 07, qsgmii)
|
|
SWITCH_PORT(7, 08, qsgmii)
|
|
|
|
SWITCH_PORT(8, 09, qsgmii)
|
|
SWITCH_PORT(9, 10, qsgmii)
|
|
SWITCH_PORT(10, 11, qsgmii)
|
|
SWITCH_PORT(11, 12, qsgmii)
|
|
SWITCH_PORT(12, 13, qsgmii)
|
|
SWITCH_PORT(13, 14, qsgmii)
|
|
SWITCH_PORT(14, 15, qsgmii)
|
|
SWITCH_PORT(15, 16, qsgmii)
|
|
|
|
SWITCH_PORT(16, 17, qsgmii)
|
|
SWITCH_PORT(17, 18, qsgmii)
|
|
SWITCH_PORT(18, 19, qsgmii)
|
|
SWITCH_PORT(19, 20, qsgmii)
|
|
SWITCH_PORT(20, 21, qsgmii)
|
|
SWITCH_PORT(21, 22, qsgmii)
|
|
SWITCH_PORT(22, 23, qsgmii)
|
|
SWITCH_PORT(23, 24, qsgmii)
|
|
|
|
SWITCH_PORT(24, 25, qsgmii)
|
|
SWITCH_PORT(25, 26, qsgmii)
|
|
SWITCH_PORT(26, 27, qsgmii)
|
|
SWITCH_PORT(27, 28, qsgmii)
|
|
SWITCH_PORT(28, 29, qsgmii)
|
|
SWITCH_PORT(29, 30, qsgmii)
|
|
SWITCH_PORT(30, 31, qsgmii)
|
|
SWITCH_PORT(31, 32, qsgmii)
|
|
|
|
SWITCH_PORT(32, 33, qsgmii)
|
|
SWITCH_PORT(33, 34, qsgmii)
|
|
SWITCH_PORT(34, 35, qsgmii)
|
|
SWITCH_PORT(35, 36, qsgmii)
|
|
SWITCH_PORT(36, 37, qsgmii)
|
|
SWITCH_PORT(37, 38, qsgmii)
|
|
SWITCH_PORT(38, 39, qsgmii)
|
|
SWITCH_PORT(39, 40, qsgmii)
|
|
|
|
SWITCH_PORT(40, 41, qsgmii)
|
|
SWITCH_PORT(41, 42, qsgmii)
|
|
SWITCH_PORT(42, 43, qsgmii)
|
|
SWITCH_PORT(43, 44, qsgmii)
|
|
SWITCH_PORT(44, 45, qsgmii)
|
|
SWITCH_PORT(45, 46, qsgmii)
|
|
SWITCH_PORT(46, 47, qsgmii)
|
|
SWITCH_PORT(47, 48, qsgmii)
|
|
|
|
/* CPU-Port */
|
|
port@52 {
|
|
ethernet = <ðernet0>;
|
|
reg = <52>;
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|