openwrt/target/linux/mpc85xx/image/p1010.mk
Matthias Schiffer 2fa53c9214 mpc85xx: p1010: make TP-Link WDR4900 v1 build again
Add the spi-loader as a pre-kernel stage, so we can lift the kernel size
limit.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2022-10-14 23:13:02 +02:00

52 lines
1.6 KiB
Makefile

DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
define Build/spi-loader-okli-compile
rm -rf $@.spi-loader-okli
$(CP) spi-loader $@.spi-loader-okli
$(MAKE) -C $@.spi-loader-okli \
CROSS_COMPILE="$(TARGET_CROSS)" CONFIG="$(DEVICE_NAME)"
cp "$@.spi-loader-okli/out/uImage" "$@"
rm -rf $@.spi-loader-okli
endef
define Build/spi-loader-okli
cat $(KDIR)/loader-$(1) "$@" > "$@.new"
mv "$@.new" "$@"
endef
define Device/tplink_tl-wdr4900-v1
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := TL-WDR4900
DEVICE_VARIANT := v1
TPLINK_HEADER_VERSION := 1
TPLINK_HWID := 0x49000001
TPLINK_HWREV := 1
TPLINK_FLASHLAYOUT := 16Mppc
KERNEL_NAME := simpleImage.tl-wdr4900-v1
KERNEL_INITRAMFS :=
KERNEL := kernel-bin | uImage none -M 0x4f4b4c49 | spi-loader-okli $(1)
KERNEL_ENTRY := 0x1000000
KERNEL_LOADADDR := 0x1000000
SUPPORTED_DEVICES += tl-wdr4900-v1
COMPILE := loader-$(1)
COMPILE/loader-$(1) := spi-loader-okli-compile
ARTIFACTS := fdt.bin
ARTIFACT/fdt.bin := append-dtb
IMAGES := factory.bin sysupgrade.bin
IMAGE/sysupgrade.bin := tplink-v1-image sysupgrade | append-metadata
IMAGE/factory.bin := tplink-v1-image factory
endef
TARGET_DEVICES += tplink_tl-wdr4900-v1
define Device/sophos_red-15w-rev1
DEVICE_VENDOR := Sophos
DEVICE_MODEL := RED 15w
DEVICE_VARIANT := Rev.1
# Original firmware uses a dedicated DTB-partition.
# The bootloader however supports FIT-images.
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += sophos_red-15w-rev1