Jacob Potter 735efbfb7c realtek: rtl838x: add Netgear GS110TUP v1 support ... The GS110TUP v1 is a managed switch similar to the GS110TPP v1, but with port 10 as SFP instead of RJ-45 and a total budget of 240 watts. Ports 1-4 support 60-watt 802.3bt PoE and ports 5-8 support 30-watt 802.3at. The flash layout of the two switches are identical, and the U-Boot configurations are the same except for having a different magic number, so installation can be done via the same U-Boot method. The following command will be needed to enable the port LEDs as per https://forum.openwrt.org/t/72510/51 : fw_setenv bootcmd "rtk network on; boota" Additionally, port 9 (1000base-T from a separate QSGMII PHY) does not function without this. Port 10 was not tested as no SFP module was available. Signed-off-by: Jacob Potter <jacob@j4cbo.com> [rebase on merged flash layout] Signed-off-by: Sander Vanheule <sander@svanheule.net>		2024-01-13 16:45:05 +01:00
..
etc	realtek: rtl838x: add Netgear GS110TUP v1 support	2024-01-13 16:45:05 +01:00
lib/upgrade	realtek: add support for TP-Link SG2210P	2022-09-13 09:22:26 +02:00