2f7d22dc6f
1231d45dcb5e wifi: mt76: mt7915: check devm_kasprintf() returned value 042082027b3f wifi: mt76: mt7921: Check devm_kasprintf() returned value 4a95c1a81eee wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings 5fdb1841f726 wifi: mt76: mt7925: fix a potential association failure upon resuming eeb51b527377 wifi: mt76: mt7925: convert comma to semicolon d4b3b302ceb9 wifi: mt76: mt7615: check devm_kasprintf() returned value 922e515bd8e0 wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc bec8cb851d99 wifi: mt76: mt7925: replace chan config with extend txpower config for clc d10ce9d65dac wifi: mt76: remove mt76_calculate_default_rate() 6685a2f4c217 wifi: mt76: mt7996: remove phy->monitor_vif a2a9d9826277 wifi: mt76: do not increase mcu skb refcount if retry is not supported 059342ca6a68 wifi: mt76: move mt76_tm_policy to from testmode.h to mt76.h 8bef11443290 wifi: mac80211: inform the low level if drv_stop() is a suspend 4b16d2bfdcbd wifi: mac80211: handle color change per link 4529cddb6718 wifi: mt76: mt7996: extend flexibility of mt7996_mcu_get_eeprom() 4364571e4b2b wifi: mt76: mt7996: add support for more variants 8c86aa304ea1 wifi: mt76: mt7996: set correct background radar capability addfbd141863 firmware: add latest mt7996 + mt7992 firmware 5ba4981f8b92 wifi: mt76: mt792x: add P2P_DEVICE support dc32780c7fcd wifi: mt76: mt7921s: fix a potential firmware freeze during startup 7b5d653ea90e wifi: mt76: mt7925: fix off by one in mt7925_load_clc() 1e57d2da94c9 wifi: mt76: mt7615: Convert comma to semicolon 7aca94abac47 wifi: mt76: mt7915: fix slot time for 5/6GHz e3e6d490ab90 wifi: mt76: mt7915: Fix mesh scan on MT7916 DBDC ee693260c521 firmware: move mt7996 firmware to the right place 867accf4f4aa wifi: mt76: mt7996: Add eht radiotap tlv 7c4d6e403381 wifi: mt76: Fix EHT NSS radiotap reporting. 71c3949fa8ac wifi: mt76: mt7921: fix a potential scan no APs 61641da04c9e mt76: mt76u_vendor_request: Do not print error messages when -EPROTO 680bc70f161f wifi: mt76: mt7921: fix using incorrect group cipher after disconnection. Signed-off-by: Felix Fietkau <nbd@nbd.name>
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0