openwrt/target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts
Rosen Penev b2f1c6ed52 ath79: qca: remove mac-address-increment
nvmem-layout allows removal

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 17:14:04 -08:00

167 lines
2.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "qca953x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-mr6400-v1", "qca,qca9531";
model = "TP-Link TL-MR6400 v1";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &wmac;
};
leds {
compatible = "gpio-leds";
/* D12 */
wan {
label = "white:wan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
};
/* D11 */
4g {
label = "white:4g";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
/* D5 */
wps {
label = "white:wps";
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};
/* D3 */
wlan {
label = "white:wlan";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
/* D2 */
led_power: power {
label = "white:power";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
/* D4 */
lan {
label = "white:lan";
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
/* SW2 */
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
/* SW3 */
rfkill {
label = "RF kill button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
gpio_usb_power {
gpio-export,name = "tp-link:power:lte";
gpio-export,output = <0>;
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_uboot_1fc00: macaddr@1fc00 {
compatible = "mac-base";
reg = <0x1fc00 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7d0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy0>;
nvmem-cells = <&macaddr_uboot_1fc00 1>;
nvmem-cell-names = "mac-address";
};
&eth1 {
nvmem-cells = <&macaddr_uboot_1fc00 (-1)>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_uboot_1fc00 0>;
nvmem-cell-names = "mac-address";
};
&usb0 {
status = "okay";
};
&usb_phy {
status = "okay";
};