mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
6254a2028c
The ASL56026 is a VDSL2 router with dual 100mbit ethernet,
also known as the ECI B-FOCuS V-2FUb/I.
CPU: Lantiq XRX268 v1.1 at 333MHz
Modem: Lantiq VRX208
RAM: 32MiB DDR2 at 167MHz
Flash: 8MiB NOR, Spansion S29GL064N90TF04
UART is at JP1:
Pin 1 TX
Pin 2 GND
Pin 3 +3.3V
Pin 4 NC
Pin 5 RX
Boot selection pins are exposed via several resistor jumpers:
boot_sel0 is at J15, on the rear of the board. Default is high.
boot_sel1 is at J3, next to the flash - it is also the flash CE# pin. Default is low.
boot_sel2 is at J12, directly below the SoC. Default is low.
boot_sel3 is at J16, on the rear of the board. Default is low.
The boot_sel pins should never be shorted, the jumper must be moved or
a lower value resistor used to change the pull (existing resistors are 4k7, 1k should work)
To install with the stock bootloader you must break the built in image selection process
which uses at least the following vars: f_upgrade_addr, f_upgrade2_addr, loadaddr, kernel_addr, activeregion, committedregion
This is done by setting loadaddr and both f_upgrade_addr vars to the same address:
VR9 # setenv loadaddr 0xB0040000
VR9 # setenv f_upgrade_addr 0xB0040000
VR9 # setenv f_upgrade2_addr 0xB0040000
VR9 # saveenv
Then flash the firmware image:
VR9 # tftpboot 0x81000000 lede-lantiq-xrx200-ASL56026-squashfs-sysupgrade.bin
VR9 # erase B0040000 +${filesize}
VR9 # cp.b 0x81000000 0xB0040000 ${filesize}
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
656 lines
18 KiB
Makefile
656 lines
18 KiB
Makefile
#
|
|
# Copyright (C) 2010-2016 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
# boards missing since devicetree update
|
|
#EASY50712 ARV3527P
|
|
|
|
KERNEL_LOADADDR = 0x80002000
|
|
KERNEL_ENTRY = 0x80002000
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
ifeq ($(SUBTARGET),xway)
|
|
UBIFS_OPTS := -m 512 -e 15872 -c 1959
|
|
else
|
|
UBIFS_OPTS := -m 2048 -e 126KiB -c 4096
|
|
endif
|
|
|
|
define Build/eva-image
|
|
lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
|
|
( dd if=$@.new bs=64k conv=sync; cat ./eva.dummy.squashfs; ) > $@
|
|
endef
|
|
|
|
define Build/dgn3500-sercom-footer
|
|
$(STAGING_DIR_HOST)/bin/dgn3500sum $@ $(1) $(2)
|
|
endef
|
|
|
|
define Build/mkbrncmdline
|
|
mkbrncmdline -i $@ -o $@.new BRN-BOOT
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/mkbrnimg
|
|
mkbrnimg -s $(SIGNATURE) -m $(MAGIC) -p $(CRC32_POLY) -o $@ $(IMAGE_KERNEL) $(IMAGE_ROOTFS)
|
|
endef
|
|
|
|
define Build/fullimage
|
|
mkimage -A mips -O linux -C lzma -T filesystem -a 0x00 \
|
|
-e 0x00 -n 'LEDE RootFS' \
|
|
-d $(IMAGE_ROOTFS) $(IMAGE_ROOTFS).new
|
|
|
|
cat $(IMAGE_KERNEL) $(IMAGE_ROOTFS).new > $@.tmp
|
|
|
|
mkimage -A mips -O linux -T multi -a 0x00 -C none \
|
|
-e 0x00 -n 'OpenWrt fullimage' \
|
|
-d $@.tmp $@
|
|
|
|
rm $(IMAGE_ROOTFS).new
|
|
rm $@.tmp
|
|
endef
|
|
|
|
# Shared device definition: applies to every defined device
|
|
define Device/Default
|
|
PROFILES = Default
|
|
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
FILESYSTEMS := squashfs
|
|
DEVICE_DTS := $(1)
|
|
DEVICE_DTS_DIR := ../dts
|
|
IMAGE_SIZE :=
|
|
SUPPORTED_DEVICES = $$(DEVICE_DTS)
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
DEVICE_VARS += IMAGE_SIZE
|
|
|
|
define Device/NAND/xway
|
|
BLOCKSIZE := 16k
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
FILESYSTEMS += ubifs
|
|
endef
|
|
|
|
define Device/NAND/xrx200
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
FILESYSTEMS += ubifs
|
|
endef
|
|
|
|
define Device/NAND
|
|
$(Device/NAND/$(SUBTARGET))
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/lantiqBrnImage
|
|
KERNEL := kernel-bin | append-dtb | mkbrncmdline | lzma-no-dict
|
|
IMAGES := factory.bin
|
|
IMAGE/factory.bin := mkbrnimg | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
DEVICE_VARS += SIGNATURE MAGIC CRC32_POLY
|
|
|
|
define Device/lantiqFullImage
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-offset 4 0
|
|
IMAGES := sysupgrade.bin fullimage.img
|
|
IMAGE/fullimage.img := fullimage | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/AVM
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
endef
|
|
|
|
ifeq ($(SUBTARGET),xway_legacy)
|
|
|
|
define Device/ARV4520PW
|
|
IMAGE_SIZE := 3648k
|
|
DEVICE_TITLE := Easybox 800, WAV-281 - ARV4520PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-rt61-pci wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV4520PW
|
|
|
|
define Device/ARV4525PW
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := Speedport W502V Typ A - ARV4525PW
|
|
DEVICE_PACKAGES := kmod-ath5k wpad-mini \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa -swconfig
|
|
endef
|
|
TARGET_DEVICES += ARV4525PW
|
|
|
|
define Device/ARV452CQW
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := Easybox 801 - ARV452CQW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ath5k wpad-mini \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa
|
|
endef
|
|
TARGET_DEVICES += ARV452CQW
|
|
|
|
define Device/ARV4518PWR01
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := ARV4518PWR01
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath5k wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV4518PWR01
|
|
|
|
define Device/ARV4518PWR01A
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := ARV4518PWR01A
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath5k wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV4518PWR01A
|
|
|
|
endif
|
|
|
|
ifeq ($(SUBTARGET),xway)
|
|
|
|
# Danube
|
|
|
|
define Device/BTHOMEHUBV2B
|
|
$(Device/NAND)
|
|
DEVICE_TITLE := BT Home Hub 2B
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
kmod-ltq-deu-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
endef
|
|
TARGET_DEVICES += BTHOMEHUBV2B
|
|
|
|
define Device/EASY50712
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := Lantiq Danube - EASY50712
|
|
endef
|
|
TARGET_DEVICES += EASY50712
|
|
|
|
define Device/ACMP252
|
|
IMAGE_SIZE := 14848k
|
|
DEVICE_TITLE := AudioCodes MediaPack MP-252
|
|
DEVICE_PACKAGES := kmod-rt2x00-pci wpad-mini \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-ptm-danube \
|
|
ltq-adsl-app -swconfig
|
|
endef
|
|
TARGET_DEVICES += ACMP252
|
|
|
|
define Device/ARV4510PW
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_TITLE := Wippies, Elisa - ARV4510PW
|
|
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport kmod-usb2-pci kmod-usb-uhci \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci kmod-ath5k wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV4510PW
|
|
|
|
define Device/ARV7525PW
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := Speedport W303V Typ A - ARV7525PW
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa -swconfig
|
|
endef
|
|
TARGET_DEVICES += ARV7525PW
|
|
|
|
define Device/ARV4519PW
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := Vodafone, Pirelli - ARV4519PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa
|
|
endef
|
|
TARGET_DEVICES += ARV4519PW
|
|
|
|
define Device/ARV7506PW11
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := Alice/O2 IAD 4421 - ARV7506PW11
|
|
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-rt2800-pci wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV7506PW11
|
|
|
|
define Device/ARV7510PW22
|
|
IMAGE_SIZE := 31232k
|
|
DEVICE_TITLE := Astoria - ARV7510PW22
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci wpad-mini \
|
|
kmod-usb-uhci kmod-usb2 kmod-usb2-pci
|
|
endef
|
|
TARGET_DEVICES += ARV7510PW22
|
|
|
|
define Device/ARV7518PW
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_TITLE := Astoria - ARV7518PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV7518PW
|
|
|
|
define Device/ARV7519PW
|
|
IMAGE_SIZE := 15488k
|
|
DEVICE_TITLE := Astoria - ARV7519PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-rt2800-pci wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV7519PW
|
|
|
|
define Device/ARV752DPW
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_TITLE := Easybox 802 - ARV752DPW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV752DPW
|
|
|
|
define Device/ARV752DPW22
|
|
IMAGE_SIZE := 7616k
|
|
DEVICE_TITLE := Easybox 803 - ARV752DPW22
|
|
DEVICE_PACKAGES := kmod-usb2-pci kmod-usb-uhci kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV752DPW22
|
|
|
|
define Device/ARV8539PW22
|
|
IMAGE_SIZE := 7616k
|
|
DEVICE_TITLE := Speedport W504V Typ A - ARV8539PW22
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
endef
|
|
TARGET_DEVICES += ARV8539PW22
|
|
|
|
define Device/GIGASX76X
|
|
IMAGE_SIZE := 7680k
|
|
DEVICE_TITLE := Gigaset sx76x
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoe \
|
|
kmod-ath5k wpad-mini
|
|
endef
|
|
TARGET_DEVICES += GIGASX76X
|
|
|
|
|
|
# AR9
|
|
|
|
define Device/BTHOMEHUBV3A
|
|
$(Device/NAND)
|
|
DEVICE_TITLE := BT Home Hub 3A
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
|
|
kmod-ltq-deu-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini \
|
|
uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += BTHOMEHUBV3A
|
|
|
|
DGN3500_KERNEL_OFFSET_HEX=0x50000
|
|
DGN3500_KERNEL_OFFSET_DEC=327680
|
|
define Device/DGN3500
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES := \
|
|
sysupgrade-NA.bin sysupgrade-WW.bin \
|
|
factory-NA.bin factory-WW.bin
|
|
IMAGE/sysupgrade-NA.bin := \
|
|
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "NA" | \
|
|
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade-WW.bin := \
|
|
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "WW" | \
|
|
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory-NA.bin := \
|
|
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
|
|
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "NA" | pad-rootfs | \
|
|
check-size 16320k | pad-to 16384k
|
|
IMAGE/factory-WW.bin := \
|
|
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
|
|
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "WW" | pad-rootfs | \
|
|
check-size 16320k | pad-to 16384k
|
|
DEVICE_TITLE := Netgear DGN3500
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ath9k kmod-owl-loader wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-deu-ar9
|
|
endef
|
|
TARGET_DEVICES += DGN3500
|
|
|
|
define Device/DGN3500B
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := \
|
|
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "DE" | \
|
|
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin := \
|
|
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
|
|
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "DE" | pad-rootfs | \
|
|
check-size 16320k | pad-to 16384k
|
|
DEVICE_TITLE := Netgear DGN3500B
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ath9k kmod-owl-loader wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-deu-ar9
|
|
endef
|
|
TARGET_DEVICES += DGN3500B
|
|
|
|
define Device/WBMRA
|
|
IMAGE_SIZE := 31488k
|
|
DEVICE_DTS := WBMR
|
|
DEVICE_TITLE := Buffalo WBMR-HP-G300H (A) - WBMR
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
endef
|
|
TARGET_DEVICES += WBMRA
|
|
|
|
define Device/WBMRB
|
|
IMAGE_SIZE := 31488k
|
|
DEVICE_DTS := WBMR
|
|
DEVICE_TITLE := Buffalo WBMR-HP-G300H (B) - WBMR
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
endef
|
|
TARGET_DEVICES += WBMRB
|
|
|
|
define Device/FRITZ7320
|
|
$(Device/AVM)
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_TITLE := 1&1 HomeServer - FRITZ7320
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-deu-ar9 kmod-usb-dwc2 -swconfig
|
|
endef
|
|
TARGET_DEVICES += FRITZ7320
|
|
|
|
define Device/H201L
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_TITLE := ZTE H201L - H201L
|
|
DEVICE_PACKAGES := kmod-ath9k-htc wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoe \
|
|
kmod-ltq-deu-ar9 kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-tapi kmod-ltq-vmmc
|
|
endef
|
|
TARGET_DEVICES += H201L
|
|
|
|
define Device/P2601HNFX
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_TITLE := ZyXEL P-2601HN-Fx
|
|
DEVICE_PACKAGES := kmod-rt2800-usb wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoe \
|
|
kmod-ltq-deu-ar9 kmod-usb-dwc2
|
|
endef
|
|
TARGET_DEVICES += P2601HNFX
|
|
|
|
|
|
endif
|
|
|
|
|
|
ifeq ($(SUBTARGET),xrx200)
|
|
|
|
# VR9
|
|
|
|
define Device/P2812HNUF1
|
|
$(Device/NAND)
|
|
DEVICE_TITLE := ZyXEL P-2812HNU-F1
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += P2812HNUF1
|
|
|
|
define Device/P2812HNUF3
|
|
$(Device/NAND)
|
|
DEVICE_TITLE := ZyXEL P-2812HNU-F3
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
|
|
endef
|
|
TARGET_DEVICES += P2812HNUF3
|
|
|
|
define Device/ARV7519RW22
|
|
IMAGE_SIZE := 31232k
|
|
DEVICE_TITLE := Livebox Astoria ARV7519RW22
|
|
DEVICE_PACKAGES := kmod-usb-dwc2
|
|
endef
|
|
TARGET_DEVICES += ARV7519RW22
|
|
|
|
define Device/ASL56026
|
|
IMAGE_SIZE := 7488k
|
|
DEVICE_TITLE := BT OpenReach - ECI VDSL Modem V-2FUb/I
|
|
endef
|
|
TARGET_DEVICES += ASL56026
|
|
|
|
define Device/BTHOMEHUBV5A
|
|
$(Device/NAND)
|
|
DEVICE_TITLE := BT Home Hub 5A
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \
|
|
kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
|
|
endef
|
|
TARGET_DEVICES += BTHOMEHUBV5A
|
|
|
|
define Device/EASY80920NAND
|
|
$(Device/lantiqFullImage)
|
|
IMAGE_SIZE := 64512k
|
|
DEVICE_TITLE := Lantiq VR9 - EASY80920NAND
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += EASY80920NAND
|
|
|
|
define Device/EASY80920NOR
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_TITLE := Lantiq VR9 - EASY80920NOR
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += EASY80920NOR
|
|
|
|
define Device/FRITZ3370
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_TITLE := Fritz!Box WLan - FRITZ3370
|
|
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2
|
|
endef
|
|
TARGET_DEVICES += FRITZ3370
|
|
|
|
define Device/FRITZ7360SL
|
|
$(Device/AVM)
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_TITLE := 1&1 HomeServer - FRITZ7360SL
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2
|
|
endef
|
|
TARGET_DEVICES += FRITZ7360SL
|
|
|
|
define Device/VG3503J
|
|
IMAGE_SIZE := 8000k
|
|
DEVICE_TITLE := BT OpenReach - ECI VDSL Modem V-2FUb/R
|
|
endef
|
|
TARGET_DEVICES += VG3503J
|
|
|
|
include tp-link.mk
|
|
|
|
define Device/WBMR300
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_TITLE := Buffalo WBMR-300HPD
|
|
DEVICE_PACKAGES := kmod-mt7603 wpad-mini kmod-usb-dwc2
|
|
endef
|
|
TARGET_DEVICES += WBMR300
|
|
|
|
define Device/VGV7510KW22NOR
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (NOR)
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
endef
|
|
TARGET_DEVICES += VGV7510KW22NOR
|
|
|
|
define Device/VGV7510KW22BRN
|
|
$(Device/lantiqBrnImage)
|
|
IMAGE_SIZE := 7168k
|
|
SIGNATURE := BRNDA6431
|
|
MAGIC := 0x12345678
|
|
CRC32_POLY := 0x04c11db7
|
|
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (BRN)
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
endef
|
|
TARGET_DEVICES += VGV7510KW22BRN
|
|
|
|
define Device/VGV7519NOR
|
|
IMAGE_SIZE := 15360k
|
|
DEVICE_TITLE := Experiabox 8 VGV7519
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
endef
|
|
TARGET_DEVICES += VGV7519NOR
|
|
|
|
define Device/VGV7519BRN
|
|
$(Device/lantiqBrnImage)
|
|
IMAGE_SIZE := 7168k
|
|
SIGNATURE := 5D00008000
|
|
MAGIC := 0x12345678
|
|
CRC32_POLY := 0x2083b8ed
|
|
DEVICE_TITLE := Experiabox 8 VGV7519 (BRN)
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
endef
|
|
TARGET_DEVICES += VGV7519BRN
|
|
|
|
endif
|
|
|
|
|
|
ifeq ($(SUBTARGET),falcon)
|
|
|
|
define Device/EASY98000NOR
|
|
IMAGE_SIZE := 3904k
|
|
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NOR
|
|
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
|
|
endef
|
|
TARGET_DEVICES += EASY98000NOR
|
|
|
|
define Device/EASY98000NAND
|
|
IMAGE_SIZE := 3904k
|
|
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NAND
|
|
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
|
|
endef
|
|
TARGET_DEVICES += EASY98000NAND
|
|
|
|
define Device/EASY98000SFLASH
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board SFLASH
|
|
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
|
|
endef
|
|
TARGET_DEVICES += EASY98000SFLASH
|
|
|
|
define Device/FALCON-MDU
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := MDU - Lantiq Falcon / VINAXdp MDU Board
|
|
endef
|
|
TARGET_DEVICES += FALCON-MDU
|
|
|
|
define Device/EASY88388
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY88388 - Lantiq Falcon FTTDP8 Reference Board
|
|
endef
|
|
TARGET_DEVICES += EASY88388
|
|
|
|
define Device/EASY88444
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY88444 - Lantiq Falcon FTTdp G.FAST Reference Board
|
|
endef
|
|
TARGET_DEVICES += EASY88444
|
|
|
|
define Device/FALCON-SFP
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := SFP - Lantiq Falcon SFP Stick
|
|
endef
|
|
TARGET_DEVICES += FALCON-SFP
|
|
|
|
define Device/EASY98035SYNCE
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY98035SYNCE - Lantiq Falcon SFP Stick with Synchronous Ethernet
|
|
endef
|
|
TARGET_DEVICES += EASY98035SYNCE
|
|
|
|
define Device/EASY98035SYNCE1588
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY98035SYNCE1588 - Lantiq Falcon SFP Stick with SyncE and IEEE1588
|
|
endef
|
|
TARGET_DEVICES += EASY98035SYNCE1588
|
|
|
|
define Device/EASY98020
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY98020 - Lantiq Falcon SFU Reference Board
|
|
endef
|
|
TARGET_DEVICES += EASY98020
|
|
|
|
define Device/EASY98020V18
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY98020V18 - Lantiq Falcon SFU Reference Board V1.8
|
|
endef
|
|
TARGET_DEVICES += EASY98020V18
|
|
|
|
define Device/EASY98021
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_TITLE := EASY98021 - Lantiq Falcon HGU Reference Board
|
|
endef
|
|
TARGET_DEVICES += EASY98021
|
|
|
|
endif
|
|
|
|
$(eval $(call BuildImage))
|