mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-20 17:32:57 +00:00
2ef587a8fc
kernel lock debugging unveiled that we should not call of_reset_control_get inside a clock's enable operation (see below) move of_reset_control_* previously used in pllb_clk_enable to new pllb_clk_prepare and pllb_clk_unprepare functions. use a container to carry runtime information. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2742 lockdep_trace_alloc+0xb8/0xfc() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.26 #6 [<c001a6ac>] (unwind_backtrace) from [<c0016dec>] (show_stack+0x10/0x14) [<c0016dec>] (show_stack) from [<c0194f68>] (dump_stack+0x7c/0x94) [<c0194f68>] (dump_stack) from [<c0021b50>] (warn_slowpath_common+0x68/0x8c) [<c0021b50>] (warn_slowpath_common) from [<c0021ba4>] (warn_slowpath_fmt+0x30/0x40) [<c0021ba4>] (warn_slowpath_fmt) from [<c0061b30>] (lockdep_trace_alloc+0xb8/0xfc) [<c0061b30>] (lockdep_trace_alloc) from [<c00cb740>] (kmem_cache_alloc+0x1c/0xf8) [<c00cb740>] (kmem_cache_alloc) from [<c01d33c8>] (of_reset_control_get+0xe8/0x12c) [<c01d33c8>] (of_reset_control_get) from [<c0269228>] (pllb_clk_enable+0x14/0xbc) [<c0269228>] (pllb_clk_enable) from [<c0265738>] (__clk_enable+0x54/0xa0) [<c0265738>] (__clk_enable) from [<c0265acc>] (clk_enable+0x18/0x2c) [<c0265acc>] (clk_enable) from [<c04325f8>] (oxnas_pcie_probe+0x3b8/0x6a0) [<c04325f8>] (oxnas_pcie_probe) from [<c01f2510>] (platform_drv_probe+0x18/0x48) [<c01f2510>] (platform_drv_probe) from [<c01f1070>] (driver_probe_device+0xd8/0x24c) [<c01f1070>] (driver_probe_device) from [<c01f1298>] (__driver_attach+0x70/0x94) [<c01f1298>] (__driver_attach) from [<c01ef728>] (bus_for_each_dev+0x4c/0x98) [<c01ef728>] (bus_for_each_dev) from [<c01f0818>] (bus_add_driver+0xcc/0x1e8) [<c01f0818>] (bus_add_driver) from [<c01f169c>] (driver_register+0xa0/0xe8) [<c01f169c>] (driver_register) from [<c01f2568>] (platform_driver_probe+0x20/0xa4) [<c01f2568>] (platform_driver_probe) from [<c0013a3c>] (do_one_initcall+0x90/0x140) [<c0013a3c>] (do_one_initcall) from [<c0421d38>] (kernel_init_freeable+0x1e4/0x2c0) [<c0421d38>] (kernel_init_freeable) from [<c000c214>] (kernel_init+0x8/0x104) [<c000c214>] (kernel_init) from [<c0008768>] (ret_from_fork+0x14/0x2c) ---[ end trace 5f17ed2f61e0683f ]--- Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43787
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org