openwrt/target/linux/generic/pending-4.14/477-mtd-add-spi-nor-add-mx25u3235f.patch
Kuan-Yi Li f1525e785e kernel: backport GD25Q256 support from 4.15
Backport below changes for GigaDevice GD25Q256 support from v4.15:

  e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info
  65153846b18c mtd: spi-nor: add support for GD25Q256

This chip is used on newer Quad-E4G boards.

Before:

[    2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19
[    2.372853] m25p80: probe of spi0.0 failed with error -2

After:

[    2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes)
[    2.376694] 5 fixed-partitions partitions found on MTD device spi0.0
[    2.383043] Creating 5 MTD partitions on "spi0.0":
[    2.387824] 0x000000000000-0x000000030000 : "u-boot"
[    2.394138] 0x000000030000-0x000000031000 : "u-boot-env"
[    2.400608] 0x000000031000-0x000000040000 : "config"
[    2.406830] 0x000000040000-0x000000050000 : "factory"
[    2.413169] 0x000000050000-0x000002000000 : "firmware"

Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2020-12-01 21:59:30 +01:00

19 lines
825 B
Diff

From: André Valentin <avalentin@marcant.net>
Subject: linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817
Signed-off-by: André Valentin <avalentin@marcant.net>
---
drivers/mtd/spi-nor/spi-nor.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1032,6 +1032,7 @@ static const struct flash_info spi_nor_i
{ "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
{ "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
{ "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
+ { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64, 0) },
{ "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
{ "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
{ "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) },