mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
b7cc661615
TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on Qualcomm/Atheros QCA9561. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x USB 2.0 - 11x LED (most are controlled by 74HC595) - 2x button - UART header on PCB* * Serial console is disabled in OEM non-beta firmwares and corresponding GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by production (non-beta) U-Boot and firmware. Currently not working: 1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs by some U-Boot versions. Flash instruction under vendor GUI: 1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin". 2. Go to WEB interface and perform usual firmware upgrade. FLash instruction under U-Boot recovery mode (doesn't work in beta firmware): 1. Setup PC with static IP "192.168.0.66/24" and tftp server. 2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make it available to download from your tftp server. 3. Press "reset" button and power up the router, wait till "WPS" LED turns on. Flash instruction under U-Boot, using UART (can be done only with preinstalled UART-enabled U-Boot version!): 1. Use "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Serg Studzinskii <serguzhg@gmail.com> [minor code style fixes, extended commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
86 lines
1.8 KiB
C
86 lines
1.8 KiB
C
/*
|
|
* Atheros AR71xx minimal nvram support
|
|
*
|
|
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/string.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include "nvram.h"
|
|
|
|
char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
|
|
{
|
|
unsigned len = strlen(name);
|
|
char *cur, *last;
|
|
|
|
if (buf_len == 0 || len == 0)
|
|
return NULL;
|
|
|
|
if (buf_len < len)
|
|
return NULL;
|
|
|
|
if (len == 1)
|
|
return memchr(buf, (int) *name, buf_len);
|
|
|
|
last = (char *) buf + buf_len - len;
|
|
for (cur = (char *) buf; cur <= last; cur++)
|
|
if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
|
|
return cur + len;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
|
|
const char *name, char *mac)
|
|
{
|
|
char *buf;
|
|
char *mac_str;
|
|
int ret;
|
|
int t;
|
|
|
|
buf = vmalloc(nvram_len);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
memcpy(buf, nvram, nvram_len);
|
|
buf[nvram_len - 1] = '\0';
|
|
|
|
mac_str = ath79_nvram_find_var(name, buf, nvram_len);
|
|
if (!mac_str) {
|
|
ret = -EINVAL;
|
|
goto free;
|
|
}
|
|
|
|
if (strlen(mac_str) == 19 && mac_str[0] == '"' && mac_str[18] == '"') {
|
|
mac_str[18] = 0;
|
|
mac_str++;
|
|
}
|
|
|
|
t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
|
|
&mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
|
|
|
|
if (t != ETH_ALEN)
|
|
t = sscanf(mac_str, "%02hhx-%02hhx-%02hhx-%02hhx-%02hhx-%02hhx",
|
|
&mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
|
|
|
|
if (t != ETH_ALEN) {
|
|
ret = -EINVAL;
|
|
goto free;
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
free:
|
|
vfree(buf);
|
|
return ret;
|
|
}
|