mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
d85438f454
First step only copies patches-5.15 and files-5.15 to patches-6.1 and files-6.1 respectively. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
263 lines
6.6 KiB
C
263 lines
6.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
#include <linux/bitfield.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/phy.h>
|
|
|
|
#define MEDAITEK_2P5GE_PHY_DMB_FW "mediatek/mediatek-2p5ge-phy-dmb.bin"
|
|
#define MEDIATEK_2P5GE_PHY_PMB_FW "mediatek/mediatek-2p5ge-phy-pmb.bin"
|
|
|
|
#define MD32_EN_CFG 0x18
|
|
#define MD32_EN BIT(0)
|
|
|
|
#define BASE100T_STATUS_EXTEND 0x10
|
|
#define BASE1000T_STATUS_EXTEND 0x11
|
|
#define EXTEND_CTRL_AND_STATUS 0x16
|
|
|
|
#define PHY_AUX_CTRL_STATUS 0x1d
|
|
#define PHY_AUX_DPX_MASK GENMASK(5, 5)
|
|
#define PHY_AUX_SPEED_MASK GENMASK(4, 2)
|
|
|
|
/* Registers on MDIO_MMD_VEND1 */
|
|
#define MTK_PHY_LINK_STATUS_MISC 0xa2
|
|
#define MTK_PHY_FDX_ENABLE BIT(5)
|
|
|
|
/* Registers on MDIO_MMD_VEND2 */
|
|
#define MTK_PHY_LED0_ON_CTRL 0x24
|
|
#define MTK_PHY_LED0_ON_LINK1000 BIT(0)
|
|
#define MTK_PHY_LED0_ON_LINK100 BIT(1)
|
|
#define MTK_PHY_LED0_ON_LINK10 BIT(2)
|
|
#define MTK_PHY_LED0_ON_LINK2500 BIT(7)
|
|
#define MTK_PHY_LED0_POLARITY BIT(14)
|
|
|
|
#define MTK_PHY_LED1_ON_CTRL 0x26
|
|
#define MTK_PHY_LED1_ON_FDX BIT(4)
|
|
#define MTK_PHY_LED1_ON_HDX BIT(5)
|
|
#define MTK_PHY_LED1_POLARITY BIT(14)
|
|
|
|
enum {
|
|
PHY_AUX_SPD_10 = 0,
|
|
PHY_AUX_SPD_100,
|
|
PHY_AUX_SPD_1000,
|
|
PHY_AUX_SPD_2500,
|
|
};
|
|
|
|
static int mt798x_2p5ge_phy_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
int i;
|
|
const struct firmware *fw;
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct device_node *np;
|
|
void __iomem *dmb_addr;
|
|
void __iomem *pmb_addr;
|
|
void __iomem *mcucsr_base;
|
|
u16 reg;
|
|
struct pinctrl *pinctrl;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw");
|
|
if (!np)
|
|
return -ENOENT;
|
|
|
|
dmb_addr = of_iomap(np, 0);
|
|
if (!dmb_addr)
|
|
return -ENOMEM;
|
|
pmb_addr = of_iomap(np, 1);
|
|
if (!pmb_addr)
|
|
return -ENOMEM;
|
|
mcucsr_base = of_iomap(np, 2);
|
|
if (!mcucsr_base)
|
|
return -ENOMEM;
|
|
|
|
ret = request_firmware(&fw, MEDAITEK_2P5GE_PHY_DMB_FW, dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to load firmware: %s, ret: %d\n",
|
|
MEDAITEK_2P5GE_PHY_DMB_FW, ret);
|
|
return ret;
|
|
}
|
|
for (i = 0; i < fw->size - 1; i += 4)
|
|
writel(*((uint32_t *)(fw->data + i)), dmb_addr + i);
|
|
release_firmware(fw);
|
|
|
|
ret = request_firmware(&fw, MEDIATEK_2P5GE_PHY_PMB_FW, dev);
|
|
if (ret) {
|
|
dev_err(dev, "failed to load firmware: %s, ret: %d\n",
|
|
MEDIATEK_2P5GE_PHY_PMB_FW, ret);
|
|
return ret;
|
|
}
|
|
for (i = 0; i < fw->size - 1; i += 4)
|
|
writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
|
|
release_firmware(fw);
|
|
|
|
reg = readw(mcucsr_base + MD32_EN_CFG);
|
|
writew(reg | MD32_EN, mcucsr_base + MD32_EN_CFG);
|
|
dev_dbg(dev, "Firmware loading/trigger ok.\n");
|
|
|
|
/* Setup LED */
|
|
phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
|
|
MTK_PHY_LED0_POLARITY);
|
|
|
|
phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
|
|
MTK_PHY_LED0_ON_LINK10 |
|
|
MTK_PHY_LED0_ON_LINK100 |
|
|
MTK_PHY_LED0_ON_LINK1000 |
|
|
MTK_PHY_LED0_ON_LINK2500);
|
|
|
|
phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
|
|
MTK_PHY_LED1_ON_FDX | MTK_PHY_LED1_ON_HDX);
|
|
|
|
pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led");
|
|
if (IS_ERR(pinctrl)) {
|
|
dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n");
|
|
return PTR_ERR(pinctrl);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt798x_2p5ge_phy_config_aneg(struct phy_device *phydev)
|
|
{
|
|
bool changed = false;
|
|
u32 adv;
|
|
int ret;
|
|
|
|
if (phydev->autoneg == AUTONEG_DISABLE) {
|
|
/* Configure half duplex with genphy_setup_forced,
|
|
* because genphy_c45_pma_setup_forced does not support.
|
|
*/
|
|
return phydev->duplex != DUPLEX_FULL
|
|
? genphy_setup_forced(phydev)
|
|
: genphy_c45_pma_setup_forced(phydev);
|
|
}
|
|
|
|
ret = genphy_c45_an_config_aneg(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret > 0)
|
|
changed = true;
|
|
|
|
adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
|
|
ret = phy_modify_changed(phydev, MII_CTRL1000,
|
|
ADVERTISE_1000FULL | ADVERTISE_1000HALF,
|
|
adv);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret > 0)
|
|
changed = true;
|
|
|
|
return genphy_c45_check_and_restart_aneg(phydev, changed);
|
|
}
|
|
|
|
static int mt798x_2p5ge_phy_get_features(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_read_abilities(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* We don't support HDX at MAC layer on mt798x.
|
|
* So mask phy's HDX capabilities, too.
|
|
*/
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
|
|
phydev->supported);
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
|
|
phydev->supported);
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
|
|
phydev->supported);
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
phydev->supported);
|
|
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt798x_2p5ge_phy_read_status(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phydev->speed = SPEED_UNKNOWN;
|
|
phydev->duplex = DUPLEX_UNKNOWN;
|
|
phydev->pause = 0;
|
|
phydev->asym_pause = 0;
|
|
|
|
if (!phydev->link)
|
|
return 0;
|
|
|
|
if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
|
|
ret = genphy_c45_read_lpa(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Read the link partner's 1G advertisement */
|
|
ret = phy_read(phydev, MII_STAT1000);
|
|
if (ret < 0)
|
|
return ret;
|
|
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
|
|
} else if (phydev->autoneg == AUTONEG_DISABLE) {
|
|
linkmode_zero(phydev->lp_advertising);
|
|
}
|
|
|
|
ret = phy_read(phydev, PHY_AUX_CTRL_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) {
|
|
case PHY_AUX_SPD_10:
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
case PHY_AUX_SPD_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
case PHY_AUX_SPD_1000:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case PHY_AUX_SPD_2500:
|
|
phydev->speed = SPEED_2500;
|
|
phydev->duplex = DUPLEX_FULL; /* 2.5G must be FDX */
|
|
break;
|
|
}
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver mtk_gephy_driver[] = {
|
|
{
|
|
PHY_ID_MATCH_EXACT(0x00339c11),
|
|
.name = "MediaTek MT798x 2.5GbE PHY",
|
|
.config_init = mt798x_2p5ge_phy_config_init,
|
|
.config_aneg = mt798x_2p5ge_phy_config_aneg,
|
|
.get_features = mt798x_2p5ge_phy_get_features,
|
|
.read_status = mt798x_2p5ge_phy_read_status,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(mtk_gephy_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = {
|
|
{ PHY_ID_MATCH_VENDOR(0x00339c00) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver");
|
|
MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl);
|
|
MODULE_FIRMWARE(MEDAITEK_2P5GE_PHY_DMB_FW);
|
|
MODULE_FIRMWARE(MEDIATEK_2P5GE_PHY_PMB_FW);
|