mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
c6ddf8d502
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
88 lines
2.4 KiB
Diff
88 lines
2.4 KiB
Diff
From b94cbaaa2facfdc6aa49d6f323da251f9e91d4ba Mon Sep 17 00:00:00 2001
|
|
From: Xiaowei Bao <xiaowei.bao@nxp.com>
|
|
Date: Tue, 14 May 2019 18:17:31 +0800
|
|
Subject: [PATCH] arm64: dts: ls1028a: add flexspi nodes
|
|
|
|
Add fspi node property for LS1028A SoC for FlexSPI driver.
|
|
Property added for the FlexSPI controller and for the connected
|
|
slave device for the LS1028ARDB and LS1028AQDS target.
|
|
This is having one SPI-NOR flash device, mt35xu02g connected at
|
|
CS0.
|
|
|
|
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
|
|
---
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
|
|
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 12 ++++++++++++
|
|
3 files changed, 42 insertions(+)
|
|
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
|
|
@@ -226,6 +226,21 @@
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
+&fspi {
|
|
+ status = "okay";
|
|
+ mt35xu02g: flash@0 {
|
|
+ compatible = "spansion,m25p80";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ m25p,fast-read;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ reg = <0>;
|
|
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
|
|
+ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
|
|
+ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
|
|
+ };
|
|
+};
|
|
+
|
|
&sai1 {
|
|
status = "okay";
|
|
};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
|
|
@@ -168,6 +168,21 @@
|
|
};
|
|
};
|
|
|
|
+&fspi {
|
|
+ status = "okay";
|
|
+ mt35xu02g: flash@0 {
|
|
+ compatible = "spansion,m25p80";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ m25p,fast-read;
|
|
+ spi-max-frequency = <20000000>;
|
|
+ reg = <0>;
|
|
+ /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
|
|
+ spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
|
|
+ spi-tx-bus-width = <1>; /* 1 SPI Tx line */
|
|
+ };
|
|
+};
|
|
+
|
|
&duart0 {
|
|
status = "okay";
|
|
};
|
|
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
|
|
@@ -180,6 +180,18 @@
|
|
clocks = <&sysclk>;
|
|
};
|
|
|
|
+ fspi: spi@20c0000 {
|
|
+ compatible = "nxp,lx2160a-fspi";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x0 0x20c0000 0x0 0x10000>,
|
|
+ <0x0 0x20000000 0x0 0x10000000>;
|
|
+ reg-names = "FSPI", "FSPI-memory";
|
|
+ interrupts = <0 25 0x4>; /* Level high type */
|
|
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
|
|
+ clock-names = "fspi_en", "fspi";
|
|
+ };
|
|
+
|
|
i2c0: i2c@2000000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|