openwrt/target/linux/generic/backport-6.6/790-34-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch
Daniel Golle ac8bfe316b generic: 6.1, 6.6: mt7530: import accepted patches
Import patches for the MT7530 DSA driver from net-next tree:
 cae425cb43fe net: dsa: allow DSA switch drivers to provide their own phylink mac ops
 dd0c9855b413 net: dsa: introduce dsa_phylink_to_port()
 7c5e37d7ee78 net: dsa: mt7530: simplify core operations
 868ff5f4944a net: dsa: mt7530-mdio: read PHY address of switch from device tree
 2c606d138518 net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
 d59cf049c837 net: dsa: mt7530: fix mirroring frames received on local port
 62d6d91db98a net: dsa: mt7530: provide own phylink MAC operations

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-04-24 21:05:46 +01:00

71 lines
2.3 KiB
Diff
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

From d4097ddef078a113643a6dcde01e99741f852adb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Date: Sat, 13 Apr 2024 16:01:39 +0300
Subject: [PATCH 2/5] net: dsa: mt7530: fix mirroring frames received on local
port
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/mt7530.c | 6 ++++++
drivers/net/dsa/mt7530.h | 4 ++++
2 files changed, 10 insertions(+)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2480,6 +2480,9 @@ mt7530_setup(struct dsa_switch *ds)
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
+ /* Allow mirroring frames received on the local port (monitor port). */
+ mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
/* Setup VLAN ID 0 for VLAN-unaware bridges */
ret = mt7530_setup_vlan0(priv);
if (ret)
@@ -2591,6 +2594,9 @@ mt7531_setup_common(struct dsa_switch *d
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
+ /* Allow mirroring frames received on the local port (monitor port). */
+ mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
/* Flush the FDB table */
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
if (ret < 0)
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -32,6 +32,10 @@ enum mt753x_id {
#define SYSC_REG_RSTCTRL 0x34
#define RESET_MCM BIT(2)
+/* Register for ARL global control */
+#define MT753X_AGC 0xc
+#define LOCAL_EN BIT(7)
+
/* Registers to mac forward control for unknown frames */
#define MT7530_MFC 0x10
#define BC_FFP(x) (((x) & 0xff) << 24)