mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
117 lines
3.9 KiB
Diff
117 lines
3.9 KiB
Diff
--- a/drivers/mtd/spi-nor/spi-nor.c
|
|
+++ b/drivers/mtd/spi-nor/spi-nor.c
|
|
@@ -538,6 +538,7 @@ static const struct spi_device_id spi_no
|
|
/* GigaDevice */
|
|
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
|
|
{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
|
|
+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },
|
|
|
|
/* Intel/Numonyx -- xxxs33b */
|
|
{ "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
|
|
@@ -560,14 +561,14 @@ static const struct spi_device_id spi_no
|
|
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
|
|
|
|
/* Micron */
|
|
- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
|
|
- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
|
|
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
|
|
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
|
|
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
|
|
- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
|
|
- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) },
|
|
- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },
|
|
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
|
|
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) },
|
|
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
|
|
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
|
|
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
|
|
+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
|
|
+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
|
|
+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
|
|
|
|
/* PMC */
|
|
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
|
|
@@ -890,6 +891,45 @@ static int spansion_quad_enable(struct s
|
|
return 0;
|
|
}
|
|
|
|
+static int micron_quad_enable(struct spi_nor *nor)
|
|
+{
|
|
+ int ret;
|
|
+ u8 val;
|
|
+
|
|
+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
|
|
+ if (ret < 0) {
|
|
+ dev_err(nor->dev, "error %d reading EVCR\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ write_enable(nor);
|
|
+
|
|
+ /* set EVCR, enable quad I/O */
|
|
+ nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON;
|
|
+ ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0);
|
|
+ if (ret < 0) {
|
|
+ dev_err(nor->dev, "error while writing EVCR register\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ ret = spi_nor_wait_till_ready(nor);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ /* read EVCR and check it */
|
|
+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
|
|
+ if (ret < 0) {
|
|
+ dev_err(nor->dev, "error %d reading EVCR\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+ if (val & EVCR_QUAD_EN_MICRON) {
|
|
+ dev_err(nor->dev, "Micron EVCR Quad bit not clear\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
|
|
{
|
|
int status;
|
|
@@ -902,6 +942,13 @@ static int set_quad_mode(struct spi_nor
|
|
return -EINVAL;
|
|
}
|
|
return status;
|
|
+ case CFI_MFR_ST:
|
|
+ status = micron_quad_enable(nor);
|
|
+ if (status) {
|
|
+ dev_err(nor->dev, "Micron quad-read not enabled\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ return status;
|
|
default:
|
|
status = spansion_quad_enable(nor);
|
|
if (status) {
|
|
--- a/include/linux/mtd/spi-nor.h
|
|
+++ b/include/linux/mtd/spi-nor.h
|
|
@@ -56,6 +56,10 @@
|
|
/* Used for Spansion flashes only. */
|
|
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
|
|
|
|
+/* Used for Micron flashes only. */
|
|
+#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
|
|
+#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
|
|
+
|
|
/* Status Register bits. */
|
|
#define SR_WIP 1 /* Write in progress */
|
|
#define SR_WEL 2 /* Write enable latch */
|
|
@@ -67,6 +71,9 @@
|
|
|
|
#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */
|
|
|
|
+/* Enhanced Volatile Configuration Register bits */
|
|
+#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */
|
|
+
|
|
/* Flag Status Register bits */
|
|
#define FSR_READY 0x80
|
|
|