openwrt/target/linux/lantiq/dts/P2812HNUFX.dtsi
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

279 lines
5.7 KiB
Plaintext

#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl_green;
led-internet = &internet_green;
led-wifi = &wireless_green;
};
memory@0 {
reg = <0x0 0x8000000>;
};
fpi@10000000 {
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin3 {
lantiq,groups = "exin3";
lantiq,function = "exin";
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led1",
"gphy0 led2", "gphy1 led2";
lantiq,function = "gphy";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,pull = <2>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
pci-in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <2>;
};
pcie-rst {
lantiq,pins = "io38";
lantiq,pull = <0>;
lantiq,output = <1>;
};
ifxhcd-rst {
lantiq,pins = "io33";
lantiq,pull = <0>;
lantiq,open-drain = <0>;
lantiq,output = <1>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
};
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffffff>;
lantiq,groups = <0x7>;
lantiq,dsl = <0x0>;
lantiq,phy1 = <0x0>;
lantiq,phy2 = <0x0>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
internet_red {
label = "p2812hnufx:red:internet";
gpios = <&stp 16 GPIO_ACTIVE_LOW>;
};
internet_green: internet_green {
label = "p2812hnufx:green:internet";
gpios = <&stp 17 GPIO_ACTIVE_LOW>;
};
dsl_green: dsl_green {
label = "p2812hnufx:green:dsl";
gpios = <&stp 18 GPIO_ACTIVE_LOW>;
};
dsl_orange {
label = "p2812hnufx:orange:dsl";
gpios = <&stp 19 GPIO_ACTIVE_LOW>;
};
wireless_orange {
label = "p2812hnufx:orange:wlan";
gpios = <&stp 20 GPIO_ACTIVE_LOW>;
};
wireless_green: wireless_green {
label = "p2812hnufx:green:wlan";
gpios = <&stp 21 GPIO_ACTIVE_LOW>;
};
power_red: power {
label = "p2812hnufx:red:power";
gpios = <&stp 22 GPIO_ACTIVE_LOW>;
};
power_green: power2 {
label = "p2812hnufx:green:power";
gpios = <&stp 23 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
phone1 {
label = "p2812hnufx:green:phone";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
phone1warn {
label = "p2812hnufx:orange:phone";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
phone2warn {
label = "p2812hnufx:orange:phone2";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
phone2 {
label = "p2812hnufx:green:phone2";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};