openwrt/target/linux/lantiq/dts/ARV8539PW22.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

177 lines
3.2 KiB
Plaintext

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ARV8539PW22 - Speedport W 504V Typ A";
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl_green;
led-internet = &online_green;
led-wifi = &wireless_green;
};
memory@0 {
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x30000>; /* 192 KiB */
read-only;
};
partition@30000 {
label = "uboot";
reg = <0x30000 0x10000>; /* 64 KiB */
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x7B0000>; /* 7872 KiB */
};
art: partition@7F0000 {
label = "art";
reg = <0x7F0000 0x10000>; /* 64 KiB*/
read-only;
};
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&art 0x400>;
ath,mac-offset = <0x16>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
relay {
lantiq,pins = "io31";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&art 0x16>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wlan {
label = "wlan";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power-green {
label = "arv8539pw22:green:power";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power-red {
label = "arv8539pw22:red:power";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
dsl_green: dsl-green {
label = "arv8539pw22:green:dsl";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
online_green: online-green {
label = "arv8539pw22:green:online";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wireless_green: wireless-green {
label = "arv8539pw22:green:wlan";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
/*
telefonie green is missing
*/
};
};