mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-18 00:06:42 +00:00
2b4d9b6850
The QCA953x only supports 25 MHz refclk, however some OEMs set an invalid bootstrap value for the REF_CLK option, which would break the clock detection in ath9k. Force the QCA953x refclk to 25MHz in ath9k, as this is (according to the datasheet) the only valid frequency. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 4c6fe32468bc60cc25a8c298498c0be3c73e7378)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org