openwrt/target/linux/ramips/image
Marc Egerton f276395cda ramips: add support for the Hak5 WiFi Pineapple Mark 7
This patch adds support for the WiFi Pineapple Mark 7, a wireless
penetration testing tool.

Specifications:
    * SoC: MediaTek MT7628 (580MHz)
    * RAM: 256MiB (DDR2)
    * Storage 1: 32MiB NOR (SPI)
    * Storage 2: 2GB eMMC
    * Wireless 1: 802.11b/g/n 2.4GHz (Built In)
    * Wireless 2: 802.11b/g/n 2.4GHz (MT7601)
    * Wireless 3: 802.11b/g/n 2.4GHz (MT7601)
    * USB: 1x USB Type-A 2.0 Host Port
    * Ethernet: 1x USB Type-C AX88772C Ethernet
    * UART: 57600 8N1 on PCB
    * Inputs: 1x Reset Button
    * Outputs: 1x RGB LED
    * FCCID: 2AA52MK7

Flash Instructions:
    Original firmware is based on OpenWRT.
    Use sysupgrade via SSH to flash.

Signed-off-by: Marc Egerton <foxtrot@realloc.me>
[pepe2k@gmail.com: set only required/used gpio groups to gpio function]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2020-11-18 23:49:34 +01:00
..
lzma-loader ramips: lzma-loader: make FLASH_START configurable 2020-09-03 14:15:30 +02:00
common-tp-link.mk treewide: omit IMAGE_SIZE argument from check-size 2020-03-21 20:02:55 +01:00
Makefile ramips: move ravpower-wd009-factory recipe to mt76x8.mk 2020-09-11 18:40:44 +02:00
mt76x8.mk ramips: add support for the Hak5 WiFi Pineapple Mark 7 2020-11-18 23:49:34 +01:00
mt7620.mk ramips: add support for Wavlink WL-WN530HG4 2020-10-27 21:20:16 +01:00
mt7621.mk ramips: add Xiaomi Mi Router 4A Gigabit explicitly 2020-11-12 17:18:26 +01:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk treewide: make dependency on kmod-usb-net selective 2020-08-10 12:54:30 +02:00
rt3883.mk ramips: rt3883: use lzma-loader for DIR-645 2020-08-28 00:25:34 +02:00