David Bauer fcd247d02b ath79: add correct phy-mode for QCA9563 boards
The TP-Link RE450 as well as the UniFi AC series missed the phy-mode
property. Because of this, the incorrect MII phy-mode from the root dtsi
was used.

With Kernel 5.4, this leads to problems when used with a AR8033 PHY. The
bootloader seems to leave the fiber pages selected.

As there's not switch to copper pages happening in at803x_config_init
due to the incorrect phy-mode, the new at803x_read_status will interpret
the status of the SGMII side as the status of the copper side.

Signed-off-by: David Bauer <mail@david-bauer.net>
2020-03-15 00:08:14 +01:00
..
2018-12-12 12:28:26 +01:00
2018-06-08 12:19:49 +02:00
2020-02-06 22:53:03 +08:00
2020-02-06 22:53:03 +08:00
2020-02-06 22:53:03 +08:00