openwrt/target/linux/ramips/dts/mt7628an.dtsi
Felix Fietkau 69ee1807ed ralink: add ethernet fe and esw reset control bit
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44042
2015-01-18 20:16:44 +00:00

251 lines
4.3 KiB
Plaintext

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ralink,mtk7628an-soc";
cpus {
cpu@0 {
compatible = "mips,mips24KEc";
};
};
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
sysc@0 {
compatible = "ralink,mt7620a-sysc";
reg = <0x0 0x100>;
};
watchdog@120 {
compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt";
reg = <0x120 0x10>;
resets = <&rstctrl 8>;
reset-names = "wdt";
interrupt-parent = <&intc>;
interrupts = <24>;
};
intc: intc@200 {
compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
resets = <&rstctrl 9>;
reset-names = "intc";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
ralink,intc-registers = <0x9c 0xa0
0x6c 0xa4
0x80 0x78>;
};
memc@300 {
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
reg = <0x300 0x100>;
resets = <&rstctrl 20>;
reset-names = "mc";
interrupt-parent = <&intc>;
interrupts = <3>;
};
gpio@600 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
reg = <0x600 0x100>;
gpio0: bank@0 {
reg = <0>;
compatible = "mtk,mt7621-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
};
gpio1: bank@1 {
reg = <1>;
compatible = "mtk,mt7621-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
};
gpio2: bank@2 {
reg = <2>;
compatible = "mtk,mt7621-gpio-bank";
gpio-controller;
#gpio-cells = <2>;
};
};
spi@b00 {
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x100>;
resets = <&rstctrl 18>;
reset-names = "spi";
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>;
status = "disabled";
};
uartlite@c00 {
compatible = "ns16550a";
reg = <0xc00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
no-loopback-test;
resets = <&rstctrl 12>;
reset-names = "uartl";
interrupt-parent = <&intc>;
interrupts = <20>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
};
};
pinctrl {
compatible = "ralink,rt2880-pinmux";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinctrl0 {
};
spi_pins: spi {
spi {
ralink,group = "spi";
ralink,function = "spi";
};
};
uart0_pins: uartlite {
uart {
ralink,group = "uart0";
ralink,function = "uart";
};
};
};
rstctrl: rstctrl {
compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
#reset-cells = <1>;
};
usbphy {
compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy";
resets = <&rstctrl 22>;
reset-names = "host";
};
sdhci@10130000 {
compatible = "ralink,mt7620-sdhci";
reg = <0x10130000 4000>;
interrupt-parent = <&intc>;
interrupts = <14>;
status = "disabled";
};
ehci@101c0000 {
compatible = "ralink,rt3xxx-ehci";
reg = <0x101c0000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <18>;
};
ohci@101c1000 {
compatible = "ralink,rt3xxx-ohci";
reg = <0x101c1000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <18>;
};
ethernet@10100000 {
compatible = "ralink,rt5350-eth";
reg = <0x10100000 10000>;
interrupt-parent = <&cpuintc>;
interrupts = <5>;
resets = <&rstctrl 21 &rstctrl 23>;
reset-names = "fe", "esw";
};
esw@10110000 {
compatible = "ralink,rt3050-esw";
reg = <0x10110000 8000>;
resets = <&rstctrl 23>;
reset-names = "esw";
interrupt-parent = <&intc>;
interrupts = <17>;
};
pcie@10140000 {
compatible = "mediatek,mt7620-pci";
reg = <0x10140000 0x100
0x10142000 0x100>;
#address-cells = <3>;
#size-cells = <2>;
resets = <&rstctrl 26>;
reset-names = "pcie0";
interrupt-parent = <&cpuintc>;
interrupts = <4>;
status = "disabled";
device_type = "pci";
bus-range = <0 255>;
ranges = <
0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
>;
pcie-bridge {
reg = <0x0000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
};
};
};