openwrt/target/linux/ath79/dts/ar7240_engenius_enh202-v1.dts
Adrian Schmutzler 72bd92bea0 ath79: drop num-cs for SPI controller
None of the spi drivers on ath79 uses the num-cs property.

Cc: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Chuanhong Guo <gch981213@gmail.com>
2020-12-04 15:50:24 +01:00

182 lines
2.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7240.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "engenius,enh202-v1", "qca,ar7240";
model = "EnGenius ENH202 v1";
aliases {
led-boot = &led_rssihigh;
led-failsafe = &led_rssihigh;
led-running = &led_rssihigh;
led-upgrade = &led_rssihigh;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
rssilow {
label = "red:rssilow";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
rssimedium {
label = "amber:rssimedium";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_rssihigh: rssihigh {
label = "green:rssihigh";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan {
label = "amber:lan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wan {
label = "green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "green:wlan";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
virtual_flash {
compatible = "mtd-concat";
devices = <&firmware1 &firmware2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
compatible = "openwrt,okli";
label = "firmware";
reg = <0x0 0x0>;
};
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x10000>;
};
partition@50000 {
label = "custom";
reg = <0x50000 0x50000>;
read-only;
};
partition@a0000 {
label = "loader";
reg = <0xa0000 0x10000>;
read-only;
};
firmware2: partition@b0000 {
label = "firmware2";
reg = <0xb0000 0xf0000>;
};
partition@1a0000 {
label = "fakeroot";
reg = <0x1a0000 0x10000>;
};
firmware1: partition@1b0000 {
label = "firmware1";
reg = <0x1b0000 0x4c0000>;
};
partition@670000 {
label = "failsafe";
reg = <0x670000 0x180000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&eth0 {
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002a";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};