Sebastian Schaper 2a743f3bdc ath79: add support for D-Link DAP-2680 A1 ... Specifications: * QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R * QCA9984, 802.11ac Wave 2 3T3R * Gigabit LAN Port (AR8035), 802.11at PoE Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net> Signed-off-by: maurerr <mariusd84@gmail.com>		2021-09-01 08:07:26 +00:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add WiFi migration for AR913x	2021-09-01 08:07:02 +00:00
dts	ath79: add support for D-Link DAP-2680 A1	2021-09-01 08:07:26 +00:00
files	ath79: add QCA956x SERDES init workaround	2021-09-01 08:07:13 +00:00
generic	ath79: add support for D-Link DAP-2680 A1	2021-09-01 08:07:26 +00:00
image	ath79: add support for D-Link DAP-2680 A1	2021-09-01 08:07:26 +00:00
mikrotik	ath79: add support for MikroTik RouterBOARD wAPR-2nD (wAP R)	2021-09-01 08:07:23 +00:00
nand	kernel: move some disabled symbols to generic	2021-09-01 08:07:23 +00:00
patches-5.4	ath79: drop upstreamed patch	2021-09-01 08:07:26 +00:00
tiny	ath79: move the squashfs feature to the parent target	2021-09-01 08:07:13 +00:00
config-5.4	ath79: enable elf mtd splitter	2021-09-01 08:06:58 +00:00
Makefile	ath79: move the squashfs feature to the parent target	2021-09-01 08:07:13 +00:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00