mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
5163bb5e54
APRESIA ApresiaLightGS120GT-SS (APLGS120GTSS) is a 16 + 4 ports gigabit
switch, based on RTL8382M.
Specifications:
- SoC : Realtek RTL8382M
- RAM : DDR3 256 MiB (Nanya NT5CC256M8JQ-EK)
- Flash : SPI-NOR 32 MiB (Macronix MX25L25635FMI-10G)
- Ethernet : 10/100/1000 Mbps x16 + 4
- port 1-8 : RTL8218B
- port 9-16 : RTL8382M, TP (SoC, RTL8218B)
- port 17-20 : RTL8214FC, TP/SFP (Combo)
- LEDs/Keys : 3x/1x
- UART : through-hole on PCB
- J6: 3.3V, TX, RX, GND from tri-angle marking side
- 115200n8
- Power : 100-120/200-240 VAC, 50/60 Hz
Max. 16 W, Avg 14 W (100 VAC)
- Plug : IEC 60320-C13
Flash instruction using factory image:
1. Boot ApresiaLightGS120GT-SS normally
2. Login to WebUI and open firmware page ("ファームウェア")
3. If the device is booted from image1, set active image for next
booting ("起動イメージ選択") to image2("イメージ2"), press apply
("適用") button and reboot the device to make booting from image2
4. On the WebUI, set active image to image1
5. Select the OpenWrt factory image and press update button ("更新")
6. Open reboot page ("再起動") and press reboot button ("再起動実行")
Notes:
- "ApresiaLightGS120GT-SS" is a model name and "APLGS120GTSS" is a model
number
- this device has 3x GPIO-controlled LEDs on PCB, but 1x LED
("green:unused") has no hole on the case
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
315 lines
6.9 KiB
Makefile
315 lines
6.9 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
include ./common.mk
|
|
|
|
define Device/allnet_all-sg8208m
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 7168k
|
|
DEVICE_VENDOR := ALLNET
|
|
DEVICE_MODEL := ALL-SG8208M
|
|
UIMAGE_MAGIC := 0x00000006
|
|
UIMAGE_NAME := 2.2.2.0
|
|
endef
|
|
TARGET_DEVICES += allnet_all-sg8208m
|
|
|
|
define Device/apresia_aplgs120gtss
|
|
$(Device/cameo-fw)
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 14848k
|
|
DEVICE_VENDOR := APRESIA
|
|
DEVICE_MODEL := ApresiaLightGS120GT-SS
|
|
UIMAGE_MAGIC := 0x12345000
|
|
CAMEO_KERNEL_PART_SIZE := 1572864
|
|
CAMEO_KERNEL_PART := 3
|
|
CAMEO_ROOTFS_PART := 4
|
|
CAMEO_CUSTOMER_SIGNATURE := 2
|
|
CAMEO_BOARD_MODEL := APLGS120GTSS
|
|
CAMEO_BOARD_VERSION := 4
|
|
endef
|
|
TARGET_DEVICES += apresia_aplgs120gtss
|
|
|
|
define Device/d-link_dgs-1210-10mp-f
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := DGS-1210-10MP
|
|
DEVICE_VARIANT := F
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-10mp-f
|
|
|
|
define Device/d-link_dgs-1210-10p
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-10P
|
|
DEVICE_PACKAGES += lua-rs232
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-10p
|
|
|
|
define Device/d-link_dgs-1210-16
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-16
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-16
|
|
|
|
define Device/d-link_dgs-1210-20
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-20
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-20
|
|
|
|
define Device/d-link_dgs-1210-28
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-28
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-28
|
|
|
|
define Device/d-link_dgs-1210-28mp-f
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-28MP
|
|
DEVICE_VARIANT := F
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-28mp-f
|
|
|
|
# The "IMG-" uImage name allows flashing the iniramfs from the vendor Web UI.
|
|
# Avoided for sysupgrade, as the vendor FW would do an incomplete flash.
|
|
define Device/engenius_ews2910p
|
|
SOC := rtl8380
|
|
IMAGE_SIZE := 8192k
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EWP2910P
|
|
UIMAGE_MAGIC := 0x03802910
|
|
KERNEL_INITRAMFS := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
libdeflate-gzip | \
|
|
uImage gzip -n 'IMG-0.00.00-c0.0.00'
|
|
endef
|
|
TARGET_DEVICES += engenius_ews2910p
|
|
|
|
define Device/hpe_1920-8g
|
|
$(Device/hpe_1920)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := 1920-8G (JG920A)
|
|
H3C_DEVICE_ID := 0x00010023
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-8g
|
|
|
|
define Device/hpe_1920-16g
|
|
$(Device/hpe_1920)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := 1920-16G (JG923A)
|
|
H3C_DEVICE_ID := 0x00010026
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-16g
|
|
|
|
define Device/hpe_1920-24g
|
|
$(Device/hpe_1920)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := 1920-24G (JG924A)
|
|
H3C_DEVICE_ID := 0x00010027
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-24g
|
|
|
|
define Device/inaba_aml2-17gp
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 13504k
|
|
DEVICE_VENDOR := INABA
|
|
DEVICE_MODEL := Abaniact AML2-17GP
|
|
UIMAGE_MAGIC := 0x83800000
|
|
endef
|
|
TARGET_DEVICES += inaba_aml2-17gp
|
|
|
|
define Device/iodata_bsh-g24mb
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 13696k
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := BSH-G24MB
|
|
UIMAGE_MAGIC := 0x83800013
|
|
endef
|
|
TARGET_DEVICES += iodata_bsh-g24mb
|
|
|
|
# "NGE" refers to the uImage magic
|
|
define Device/netgear_nge
|
|
KERNEL := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
lzma | \
|
|
uImage lzma
|
|
KERNEL_INITRAMFS := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
lzma | \
|
|
uImage lzma
|
|
SOC := rtl8380
|
|
IMAGE_SIZE := 14848k
|
|
UIMAGE_MAGIC := 0x4e474520
|
|
DEVICE_VENDOR := NETGEAR
|
|
endef
|
|
|
|
define Device/netgear_gs108t-v3
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS108T
|
|
DEVICE_VARIANT := v3
|
|
endef
|
|
TARGET_DEVICES += netgear_gs108t-v3
|
|
|
|
define Device/netgear_gs110tpp-v1
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS110TPP
|
|
DEVICE_VARIANT := v1
|
|
endef
|
|
TARGET_DEVICES += netgear_gs110tpp-v1
|
|
|
|
define Device/netgear_gs308t-v1
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS308T
|
|
DEVICE_VARIANT := v1
|
|
UIMAGE_MAGIC := 0x4e474335
|
|
endef
|
|
TARGET_DEVICES += netgear_gs308t-v1
|
|
|
|
define Device/netgear_gs310tp-v1
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS310TP
|
|
DEVICE_VARIANT := v1
|
|
UIMAGE_MAGIC := 0x4e474335
|
|
DEVICE_PACKAGES += lua-rs232
|
|
endef
|
|
TARGET_DEVICES += netgear_gs310tp-v1
|
|
|
|
define Device/panasonic_m16eg-pn28160k
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 16384k
|
|
DEVICE_VENDOR := Panasonic
|
|
DEVICE_MODEL := Switch-M16eG
|
|
DEVICE_VARIANT := PN28160K
|
|
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
|
|
endef
|
|
TARGET_DEVICES += panasonic_m16eg-pn28160k
|
|
|
|
define Device/panasonic_m24eg-pn28240k
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 16384k
|
|
DEVICE_VENDOR := Panasonic
|
|
DEVICE_MODEL := Switch-M24eG
|
|
DEVICE_VARIANT := PN28240K
|
|
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
|
|
endef
|
|
TARGET_DEVICES += panasonic_m24eg-pn28240k
|
|
|
|
define Device/panasonic_m8eg-pn28080k
|
|
SOC := rtl8380
|
|
IMAGE_SIZE := 16384k
|
|
DEVICE_VENDOR := Panasonic
|
|
DEVICE_MODEL := Switch-M8eG
|
|
DEVICE_VARIANT := PN28080K
|
|
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
|
|
endef
|
|
TARGET_DEVICES += panasonic_m8eg-pn28080k
|
|
|
|
define Device/tplink_sg2008p-v1
|
|
SOC := rtl8380
|
|
KERNEL_SIZE := 6m
|
|
IMAGE_SIZE := 26m
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := SG2008P
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-hwmon-tps23861
|
|
endef
|
|
TARGET_DEVICES += tplink_sg2008p-v1
|
|
|
|
define Device/tplink_sg2210p-v3
|
|
SOC := rtl8380
|
|
KERNEL_SIZE := 6m
|
|
IMAGE_SIZE := 26m
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := SG2210P
|
|
DEVICE_VARIANT := v3
|
|
DEVICE_PACKAGES := kmod-hwmon-tps23861
|
|
endef
|
|
TARGET_DEVICES += tplink_sg2210p-v3
|
|
|
|
define Device/zyxel_gs1900-10hp
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-10HP
|
|
ZYXEL_VERS := AAZI
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-10hp
|
|
|
|
define Device/zyxel_gs1900-16
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-16
|
|
ZYXEL_VERS := AAHJ
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-16
|
|
|
|
define Device/zyxel_gs1900-8
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-8
|
|
ZYXEL_VERS := AAHH
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-8
|
|
|
|
define Device/zyxel_gs1900-8hp-v1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-8HP
|
|
DEVICE_VARIANT := v1
|
|
ZYXEL_VERS := AAHI
|
|
DEVICE_PACKAGES += lua-rs232
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-8hp-v1
|
|
|
|
define Device/zyxel_gs1900-8hp-v2
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-8HP
|
|
DEVICE_VARIANT := v2
|
|
ZYXEL_VERS := AAHI
|
|
DEVICE_PACKAGES += lua-rs232
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-8hp-v2
|
|
|
|
define Device/zyxel_gs1900-24-v1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24
|
|
DEVICE_VARIANT := v1
|
|
ZYXEL_VERS := AAHL
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24-v1
|
|
|
|
define Device/zyxel_gs1900-24e
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24E
|
|
ZYXEL_VERS := AAHK
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24e
|
|
|
|
define Device/zyxel_gs1900-24hp-v1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24HP
|
|
DEVICE_VARIANT := v1
|
|
ZYXEL_VERS := AAHM
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24hp-v1
|
|
|
|
define Device/zyxel_gs1900-24hp-v2
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24HP
|
|
DEVICE_VARIANT := v2
|
|
ZYXEL_VERS := ABTP
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24hp-v2
|