mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
0dfc0495fc
Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6281 @1GHz - 128Mb RAM - 256Mb NAND - 1x GbE LAN (Marvell 88E1116) - 1x USB 2.0 - 2x SATA - PCF8563 RTC - LM75 sensor - TC654 PWM fan controller - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b ./u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 netgear_stora-u-boot.kwb - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-netgear_stora-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade The fan is controlled in 3 stages by a script running every minute from cron, measuring the CPU temperature. Snippets taken from bodhi <mibodhi@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> |
||
|---|---|---|
| .. | ||
| 007-nsa310-uboot-generic.patch | ||
| 008-nsa325-uboot-generic.patch | ||
| 010-pogoplug_v4.patch | ||
| 110-dockstar.patch | ||
| 120-iconnect.patch | ||
| 130-ib62x0.patch | ||
| 140-pogoplug_e02.patch | ||
| 150-goflexhome.patch | ||
| 151-arm-kirkwood-add-CheckPoint-L-50-device.patch | ||
| 160-nsa310s.patch | ||
| 170-sheevaplug.patch | ||
| 180-netgear-stora.patch | ||
| 200-openwrt-config.patch | ||
| 201-blackarmor-nas220.patch | ||
| 701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch | ||
| 702-phy-mv88e61xx-add-support-for-MV88E6171.patch | ||