mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
8e09f9ffc3
After the kernel has switched version to 5.10, JA76PF2 and RouterStations lost the capability to sysupgrade the OpenWrt version. The cause is the lack of porting the patches responsible for partial flash erase block writing and these boards FIS directory and RedBoot config partitions share the same erase block. Because of that the FIS directory can't be updated to accommodate kernel/rootfs partition size changes. This could be remedied by bootloader update, but it is very intrusive and could potentially lead to non-trivial recovery procedure, if something went wrong. The less difficult option is to use OpenWrt kernel loader, which will let us use static partition sizes and employ mtd splitter to dynamically adjust kernel and rootfs partition sizes. On sysupgrade from ath79 19.07 or 21.02 image, which still let to modify FIS directory, the loader will be written to kernel partition, while the kernel+rootfs to rootfs partition. The caveats are: * image format changes, no possible upgrade from ar71xx target images * downgrade to any older OpenWrt version will require TFTP recovery or usage of bootloader command line interface To downgrade to 19.07 or 21.02, or to upgrade if one is already on OpenWrt with kernel 5.10, for RouterStations use TFTP recovery procedure. For JA76PF2 use instructions from this commit message: commit0cc87b3bac("ath79: image: disable sysupgrade images for routerstations and ja76pf2"), replacing kernel image with loader (loader.bin suffix) and rootfs image with firmware (firmware.bin suffix). Fixes:b10d604459("kernel: add linux 5.10 support") Fixes:15aa53d7ee("ath79: switch to Kernel 5.10") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (mkubntimage was moved to generic-ubnt.mk) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (cherry picked from commit5c142aad7b)
505 lines
13 KiB
Makefile
505 lines
13 KiB
Makefile
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
|
|
|
|
# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
|
|
# VERSION_DIST being on the place of major(?) version number, so we need to
|
|
# use some number.
|
|
UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
|
|
|
|
# mkubntimage is using the kernel image direct
|
|
# routerboard creates partitions out of the ubnt header
|
|
define Build/mkubntimage
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-k $(IMAGE_KERNEL) -r $@ -o $@
|
|
endef
|
|
|
|
define Build/mkubntimage2
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-p jffs2:0x50000:0xf60000:0:0:$@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
|
|
# booting the image, the size doesn't matter.
|
|
define Build/mkubntimage-split
|
|
-[ -f $@ ] && ( \
|
|
dd if=$@ of=$@.old1 bs=1024k count=1; \
|
|
dd if=$@ of=$@.old2 bs=1024k skip=1; \
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
|
|
-k $@.old1 -r $@.old2 -o $@; \
|
|
rm $@.old1 $@.old2 )
|
|
endef
|
|
|
|
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
|
|
# UBNT_TYPE e.g. one of (BZ, XM, XW)
|
|
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
|
|
# UBNT_VERSION e.g. one of (6.0.0, 8.5.3)
|
|
define Device/ubnt
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | mkubntimage-split
|
|
endef
|
|
|
|
define Device/ubnt-bz
|
|
$(Device/ubnt)
|
|
SOC := ar7241
|
|
IMAGE_SIZE := 7448k
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar7240
|
|
UBNT_TYPE := BZ
|
|
UBNT_VERSION := 6.0.0
|
|
endef
|
|
|
|
define Device/ubnt-sw
|
|
$(Device/ubnt)
|
|
SOC := ar7242
|
|
DEVICE_PACKAGES += kmod-usb-ohci
|
|
IMAGE_SIZE := 7552k
|
|
UBNT_BOARD := SW
|
|
UBNT_CHIP := ar7240
|
|
UBNT_TYPE := SW
|
|
UBNT_VERSION := 1.4.1
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
|
|
endef
|
|
|
|
define Device/ubnt-2wa
|
|
$(Device/ubnt)
|
|
SOC := ar9342
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := WA
|
|
UBNT_CHIP := ar934x
|
|
UBNT_TYPE := 2WA
|
|
UBNT_VERSION := 8.5.3
|
|
endef
|
|
|
|
define Device/ubnt-wa
|
|
$(Device/ubnt)
|
|
SOC := ar9342
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := WA
|
|
UBNT_CHIP := ar934x
|
|
UBNT_TYPE := WA
|
|
UBNT_VERSION := 8.5.3
|
|
endef
|
|
|
|
define Device/ubnt-xc
|
|
$(Device/ubnt)
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := XC
|
|
UBNT_CHIP := qca955x
|
|
UBNT_TYPE := XC
|
|
UBNT_VERSION := 8.5.3
|
|
endef
|
|
|
|
define Device/ubnt-xm
|
|
$(Device/ubnt)
|
|
DEVICE_VARIANT := XM
|
|
DEVICE_PACKAGES += kmod-usb-ohci
|
|
IMAGE_SIZE := 7448k
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar7240
|
|
UBNT_REVISION := 42.$(UBNT_REVISION)
|
|
UBNT_TYPE := XM
|
|
UBNT_VERSION := 6.0.0
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
|
|
endef
|
|
|
|
define Device/ubnt-xw
|
|
$(Device/ubnt)
|
|
SOC := ar9342
|
|
DEVICE_VARIANT := XW
|
|
IMAGE_SIZE := 7552k
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar934x
|
|
UBNT_REVISION := 42.$(UBNT_REVISION)
|
|
UBNT_TYPE := XW
|
|
UBNT_VERSION := 6.0.4
|
|
endef
|
|
|
|
define Device/ubnt-unifi-jffs2
|
|
$(Device/ubnt)
|
|
KERNEL_SIZE := 3072k
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_TYPE := BZ
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\
|
|
pad-rootfs | check-size | append-metadata
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
|
|
endef
|
|
|
|
define Device/ubnt-acb
|
|
$(Device/ubnt)
|
|
IMAGE_SIZE := 15744k
|
|
UBNT_BOARD := ACB
|
|
UBNT_TYPE := ACB
|
|
UBNT_VERSION := 2.5.0
|
|
endef
|
|
|
|
define Device/ubnt_aircube-ac
|
|
$(Device/ubnt-acb)
|
|
SOC := ar9342
|
|
DEVICE_MODEL := airCube AC
|
|
UBNT_CHIP := ar9342
|
|
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += ubnt_aircube-ac
|
|
|
|
define Device/ubnt_aircube-isp
|
|
$(Device/ubnt-acb)
|
|
SOC := qca9533
|
|
DEVICE_MODEL := airCube ISP
|
|
UBNT_CHIP := qca9533
|
|
SUPPORTED_DEVICES += ubnt,acb-isp
|
|
endef
|
|
TARGET_DEVICES += ubnt_aircube-isp
|
|
|
|
define Device/ubnt_airrouter
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := AirRouter
|
|
SUPPORTED_DEVICES += airrouter
|
|
endef
|
|
TARGET_DEVICES += ubnt_airrouter
|
|
|
|
define Device/ubnt_bullet-ac
|
|
$(Device/ubnt-2wa)
|
|
DEVICE_MODEL := Bullet AC
|
|
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-ac
|
|
|
|
define Device/ubnt_bullet-m-ar7240
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7240
|
|
DEVICE_MODEL := Bullet M
|
|
DEVICE_VARIANT := XM (AR7240)
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-m-ar7240
|
|
|
|
define Device/ubnt_bullet-m-ar7241
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := Bullet M
|
|
DEVICE_VARIANT := XM (AR7241)
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += bullet-m ubnt,bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-m-ar7241
|
|
|
|
define Device/ubnt_bullet-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_MODEL := Bullet M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += bullet-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-m-xw
|
|
|
|
define Device/ubnt_edgeswitch-5xp
|
|
$(Device/ubnt-sw)
|
|
DEVICE_MODEL := EdgeSwitch 5XP
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgeswitch-5xp
|
|
|
|
define Device/ubnt_edgeswitch-8xp
|
|
$(Device/ubnt-sw)
|
|
DEVICE_MODEL := EdgeSwitch 8XP
|
|
DEVICE_PACKAGES += kmod-switch-bcm53xx-mdio
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgeswitch-8xp
|
|
|
|
define Device/ubnt_lap-120
|
|
$(Device/ubnt-wa)
|
|
DEVICE_MODEL := LiteAP ac (LAP-120)
|
|
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += ubnt_lap-120
|
|
|
|
define Device/ubnt_litebeam-ac-gen2
|
|
$(Device/ubnt-wa)
|
|
DEVICE_MODEL := LiteBeam AC
|
|
DEVICE_VARIANT := Gen2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += ubnt_litebeam-ac-gen2
|
|
|
|
define Device/ubnt_nanobeam-ac
|
|
$(Device/ubnt-wa)
|
|
DEVICE_MODEL := NanoBeam AC
|
|
DEVICE_VARIANT := Gen1
|
|
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanobeam-ac
|
|
|
|
define Device/ubnt_nanobeam-ac-gen2
|
|
$(Device/ubnt-wa)
|
|
DEVICE_MODEL := NanoBeam AC
|
|
DEVICE_VARIANT := Gen2
|
|
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanobeam-ac-gen2
|
|
|
|
define Device/ubnt_nanobeam-ac-xc
|
|
$(Device/ubnt-xc)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := NanoBeam AC
|
|
DEVICE_VARIANT := Gen1 (XC)
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct rssileds
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanobeam-ac-xc
|
|
|
|
define Device/ubnt_nanobeam-m5-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_MODEL := NanoBeam M5
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += loco-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanobeam-m5-xw
|
|
|
|
define Device/ubnt_nanobridge-m
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := NanoBridge M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanobridge-m
|
|
|
|
define Device/ubnt_nanostation-ac
|
|
$(Device/ubnt-wa)
|
|
DEVICE_MODEL := Nanostation AC
|
|
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-ac
|
|
|
|
define Device/ubnt_nanostation-ac-loco
|
|
$(Device/ubnt-wa)
|
|
DEVICE_MODEL := Nanostation AC loco
|
|
DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-ac-loco
|
|
|
|
define Device/ubnt_nanostation-loco-m
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := Nanostation Loco M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-loco-m
|
|
|
|
define Device/ubnt_nanostation-loco-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_MODEL := Nanostation Loco M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += loco-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-loco-m-xw
|
|
|
|
define Device/ubnt_nanostation-m
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := Nanostation M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += nanostation-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-m
|
|
|
|
define Device/ubnt_nanostation-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_MODEL := Nanostation M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += nanostation-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-m-xw
|
|
|
|
define Device/ubnt_picostation-m
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := Picostation M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_picostation-m
|
|
|
|
define Device/ubnt_powerbeam-5ac-500
|
|
$(Device/ubnt-xc)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := PowerBeam 5AC
|
|
DEVICE_VARIANT := 500
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += ubnt_powerbeam-5ac-500
|
|
|
|
define Device/ubnt_powerbeam-5ac-gen2
|
|
$(Device/ubnt-wa)
|
|
DEVICE_MODEL := PowerBeam 5AC
|
|
DEVICE_VARIANT := Gen2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct rssileds
|
|
endef
|
|
TARGET_DEVICES += ubnt_powerbeam-5ac-gen2
|
|
|
|
define Device/ubnt_powerbeam-m2-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_MODEL := PowerBeam M2
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += loco-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_powerbeam-m2-xw
|
|
|
|
define Device/ubnt_powerbeam-m5-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_MODEL := PowerBeam M5
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += loco-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_powerbeam-m5-xw
|
|
|
|
define Device/ubnt_powerbridge-m
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := PowerBridge M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_powerbridge-m
|
|
|
|
define Device/ubnt_rocket-5ac-lite
|
|
$(Device/ubnt-xc)
|
|
SOC := qca9558
|
|
DEVICE_MODEL := Rocket 5AC
|
|
DEVICE_VARIANT := Lite
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += ubnt_rocket-5ac-lite
|
|
|
|
define Device/ubnt_rocket-m
|
|
$(Device/ubnt-xm)
|
|
SOC := ar7241
|
|
DEVICE_MODEL := Rocket M
|
|
DEVICE_PACKAGES += rssileds
|
|
SUPPORTED_DEVICES += rocket-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_rocket-m
|
|
|
|
define Device/ubnt_routerstation_common
|
|
DEVICE_PACKAGES := -kmod-ath9k -wpad-basic-wolfssl -uboot-envtools kmod-usb-ohci \
|
|
kmod-usb2 fconfig
|
|
DEVICE_VENDOR := Ubiquiti
|
|
SOC := ar7161
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x50000
|
|
COMPILE := loader-$(1).bin
|
|
COMPILE/loader-$(1).bin := loader-okli-compile | lzma | pad-to 128k
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | \
|
|
mkubntimage $$$$(KDIR)/loader-$(1).bin | check-size
|
|
IMAGE/sysupgrade.bin := append-kernel | uImage lzma -M 0x4f4b4c49 | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | pad-to $$$$(BLOCKSIZE) | check-size | \
|
|
sysupgrade-tar kernel=$$$$(KDIR)/loader-$(1).bin rootfs=$$$$@ | append-metadata
|
|
KERNEL := kernel-bin | append-dtb | lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := Partition design has changed compared to older versions (19.07 and 21.02) \
|
|
due to kernel drivers restrictions. Upgrade via sysupgrade mechanism is one way operation. \
|
|
Downgrading OpenWrt version will involve usage of TFTP recovery or bootloader command line interface.
|
|
endef
|
|
|
|
define Device/ubnt_routerstation
|
|
$(Device/ubnt_routerstation_common)
|
|
DEVICE_MODEL := RouterStation
|
|
UBNT_BOARD := RS
|
|
UBNT_TYPE := RSx
|
|
UBNT_CHIP := ar7100
|
|
DEVICE_PACKAGES += -swconfig
|
|
endef
|
|
TARGET_DEVICES += ubnt_routerstation
|
|
|
|
define Device/ubnt_routerstation-pro
|
|
$(Device/ubnt_routerstation_common)
|
|
DEVICE_MODEL := RouterStation Pro
|
|
UBNT_BOARD := RSPRO
|
|
UBNT_TYPE := RSPRO
|
|
UBNT_CHIP := ar7100pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_routerstation-pro
|
|
|
|
define Device/ubnt_unifi
|
|
$(Device/ubnt-bz)
|
|
DEVICE_MODEL := UniFi AP
|
|
SUPPORTED_DEVICES += unifi
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi
|
|
|
|
define Device/ubnt_unifiac
|
|
DEVICE_VENDOR := Ubiquiti
|
|
SOC := qca9563
|
|
IMAGE_SIZE := 7744k
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
|
|
define Device/ubnt_unifiac-lite
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_MODEL := UniFi AC Lite
|
|
DEVICE_PACKAGES += -swconfig
|
|
SUPPORTED_DEVICES += unifiac-lite
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-lite
|
|
|
|
define Device/ubnt_unifiac-lr
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_MODEL := UniFi AC LR
|
|
DEVICE_PACKAGES += -swconfig
|
|
SUPPORTED_DEVICES += unifiac-lite ubnt,unifiac-lite
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-lr
|
|
|
|
define Device/ubnt_unifiac-mesh
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_MODEL := UniFi AC Mesh
|
|
DEVICE_PACKAGES += -swconfig
|
|
SUPPORTED_DEVICES += unifiac-lite
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-mesh
|
|
|
|
define Device/ubnt_unifiac-mesh-pro
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_MODEL := UniFi AC Mesh Pro
|
|
SUPPORTED_DEVICES += unifiac-pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-mesh-pro
|
|
|
|
define Device/ubnt_unifiac-pro
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_MODEL := UniFi AC Pro
|
|
DEVICE_PACKAGES += kmod-usb2
|
|
SUPPORTED_DEVICES += unifiac-pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-pro
|
|
|
|
define Device/ubnt_unifi-ap-outdoor-plus
|
|
$(Device/ubnt-bz)
|
|
$(Device/ubnt-unifi-jffs2)
|
|
DEVICE_MODEL := UniFi AP Outdoor+
|
|
SUPPORTED_DEVICES += unifi-outdoor-plus
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-ap-outdoor-plus
|
|
|
|
define Device/ubnt_unifi-ap-pro
|
|
$(Device/ubnt-unifi-jffs2)
|
|
SOC := ar9344
|
|
DEVICE_MODEL := UniFi AP Pro
|
|
UBNT_CHIP := ar934x
|
|
SUPPORTED_DEVICES += uap-pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-ap-pro
|