mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-16 18:00:53 +00:00
ca5c695a45
Deleted following upstreamed patches: bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch Manually rebased following patches: bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch Runtime tested on turris-omnia and glinet-b1300. Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200] Signed-off-by: Petr Štetiar <ynezz@true.cz>
44 lines
1.6 KiB
Diff
44 lines
1.6 KiB
Diff
From 215752d596024ea482174b8fdf81d262a1f6c042 Mon Sep 17 00:00:00 2001
|
|
From: Sam Nazarko <email@samnazarko.co.uk>
|
|
Date: Fri, 1 Apr 2016 17:27:21 +0100
|
|
Subject: [PATCH] smsc95xx: Experimental: Enable turbo_mode and
|
|
packetsize=2560 by default
|
|
|
|
See: http://forum.kodi.tv/showthread.php?tid=285288
|
|
---
|
|
drivers/net/usb/smsc95xx.c | 14 +++++++++-----
|
|
1 file changed, 9 insertions(+), 5 deletions(-)
|
|
|
|
--- a/drivers/net/usb/smsc95xx.c
|
|
+++ b/drivers/net/usb/smsc95xx.c
|
|
@@ -80,6 +80,10 @@ static bool truesize_mode = false;
|
|
module_param(truesize_mode, bool, 0644);
|
|
MODULE_PARM_DESC(truesize_mode, "Report larger truesize value");
|
|
|
|
+static int packetsize = 2560;
|
|
+module_param(packetsize, int, 0644);
|
|
+MODULE_PARM_DESC(packetsize, "Override the RX URB packet size");
|
|
+
|
|
static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
|
|
u32 *data, int in_pm)
|
|
{
|
|
@@ -932,13 +936,13 @@ static int smsc95xx_reset(struct usbnet
|
|
|
|
if (!turbo_mode) {
|
|
burst_cap = 0;
|
|
- dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
|
|
+ dev->rx_urb_size = packetsize ? packetsize : MAX_SINGLE_PACKET_SIZE;
|
|
} else if (dev->udev->speed == USB_SPEED_HIGH) {
|
|
- burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
|
|
- dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
|
|
+ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_HS_BURST_CAP_SIZE;
|
|
+ burst_cap = dev->rx_urb_size / HS_USB_PKT_SIZE;
|
|
} else {
|
|
- burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
|
|
- dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
|
|
+ dev->rx_urb_size = packetsize ? packetsize : DEFAULT_FS_BURST_CAP_SIZE;
|
|
+ burst_cap = dev->rx_urb_size / FS_USB_PKT_SIZE;
|
|
}
|
|
|
|
netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
|