mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
28d8972c25
The mynet range extender hardware is suffering from ethernet link loss when booting with a recent openwrt image. This only happens on 100mbps links, with 1Gbps speed the link was fine. The cause of the problem is that the AR8035 PHY (aka F1E) requires turning on and off the special TX delay setting depending on the speed of the link. The 10mbps mode only needed the proper pll value, which was extracted from the vendor code. Reported-by: Pascal Paradis Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 45954
181 lines
4.5 KiB
Diff
181 lines
4.5 KiB
Diff
--- a/drivers/net/phy/at803x.c
|
|
+++ b/drivers/net/phy/at803x.c
|
|
@@ -12,12 +12,14 @@
|
|
*/
|
|
|
|
#include <linux/phy.h>
|
|
+#include <linux/mdio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/gpio/consumer.h>
|
|
+#include <linux/platform_data/phy-at803x.h>
|
|
|
|
#define AT803X_INTR_ENABLE 0x12
|
|
#define AT803X_INTR_STATUS 0x13
|
|
@@ -34,8 +36,16 @@
|
|
#define AT803X_INER 0x0012
|
|
#define AT803X_INER_INIT 0xec00
|
|
#define AT803X_INSR 0x0013
|
|
+
|
|
+#define AT803X_PCS_SMART_EEE_CTRL3 0x805D
|
|
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK 0x3
|
|
+#define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT 12
|
|
+#define AT803X_SMART_EEE_CTRL3_LPI_EN BIT(8)
|
|
+
|
|
#define AT803X_DEBUG_ADDR 0x1D
|
|
#define AT803X_DEBUG_DATA 0x1E
|
|
+#define AT803X_DBG0_REG 0x00
|
|
+#define AT803X_DEBUG_RGMII_RX_CLK_DLY BIT(8)
|
|
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
|
|
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
|
|
|
|
@@ -50,6 +60,7 @@ MODULE_LICENSE("GPL");
|
|
struct at803x_priv {
|
|
bool phy_reset:1;
|
|
struct gpio_desc *gpiod_reset;
|
|
+ int prev_speed;
|
|
};
|
|
|
|
struct at803x_context {
|
|
@@ -61,6 +71,43 @@ struct at803x_context {
|
|
u16 led_control;
|
|
};
|
|
|
|
+static u16
|
|
+at803x_dbg_reg_rmw(struct phy_device *phydev, u16 reg, u16 clear, u16 set)
|
|
+{
|
|
+ struct mii_bus *bus = phydev->bus;
|
|
+ int val;
|
|
+
|
|
+ mutex_lock(&bus->mdio_lock);
|
|
+
|
|
+ bus->write(bus, phydev->addr, AT803X_DEBUG_ADDR, reg);
|
|
+ val = bus->read(bus, phydev->addr, AT803X_DEBUG_DATA);
|
|
+ if (val < 0) {
|
|
+ val = 0xffff;
|
|
+ goto out;
|
|
+ }
|
|
+
|
|
+ val &= ~clear;
|
|
+ val |= set;
|
|
+ bus->write(bus, phydev->addr, AT803X_DEBUG_DATA, val);
|
|
+
|
|
+out:
|
|
+ mutex_unlock(&bus->mdio_lock);
|
|
+ return val;
|
|
+}
|
|
+
|
|
+static inline void
|
|
+at803x_dbg_reg_set(struct phy_device *phydev, u16 reg, u16 set)
|
|
+{
|
|
+ at803x_dbg_reg_rmw(phydev, reg, 0, set);
|
|
+}
|
|
+
|
|
+static inline void
|
|
+at803x_dbg_reg_clr(struct phy_device *phydev, u16 reg, u16 clear)
|
|
+{
|
|
+ at803x_dbg_reg_rmw(phydev, reg, clear, 0);
|
|
+}
|
|
+
|
|
+
|
|
/* save relevant PHY registers to private copy */
|
|
static void at803x_context_save(struct phy_device *phydev,
|
|
struct at803x_context *context)
|
|
@@ -208,8 +255,16 @@ static int at803x_probe(struct phy_devic
|
|
return 0;
|
|
}
|
|
|
|
+static void at803x_disable_smarteee(struct phy_device *phydev)
|
|
+{
|
|
+ phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_PCS_SMART_EEE_CTRL3,
|
|
+ 1 << AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_SHIFT);
|
|
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
|
|
+}
|
|
+
|
|
static int at803x_config_init(struct phy_device *phydev)
|
|
{
|
|
+ struct at803x_platform_data *pdata;
|
|
int ret;
|
|
|
|
ret = genphy_config_init(phydev);
|
|
@@ -227,6 +282,26 @@ static int at803x_config_init(struct phy
|
|
return ret;
|
|
}
|
|
|
|
+ pdata = dev_get_platdata(&phydev->dev);
|
|
+ if (pdata) {
|
|
+ if (pdata->disable_smarteee)
|
|
+ at803x_disable_smarteee(phydev);
|
|
+
|
|
+ if (pdata->enable_rgmii_rx_delay)
|
|
+ at803x_dbg_reg_set(phydev, AT803X_DBG0_REG,
|
|
+ AT803X_DEBUG_RGMII_RX_CLK_DLY);
|
|
+ else
|
|
+ at803x_dbg_reg_clr(phydev, AT803X_DBG0_REG,
|
|
+ AT803X_DEBUG_RGMII_RX_CLK_DLY);
|
|
+
|
|
+ if (pdata->enable_rgmii_tx_delay)
|
|
+ at803x_dbg_reg_set(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
|
|
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
|
|
+ else
|
|
+ at803x_dbg_reg_clr(phydev, AT803X_DEBUG_SYSTEM_MODE_CTRL,
|
|
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
|
|
+ }
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
@@ -258,6 +334,8 @@ static int at803x_config_intr(struct phy
|
|
static void at803x_link_change_notify(struct phy_device *phydev)
|
|
{
|
|
struct at803x_priv *priv = phydev->priv;
|
|
+ struct at803x_platform_data *pdata;
|
|
+ pdata = dev_get_platdata(&phydev->dev);
|
|
|
|
/*
|
|
* Conduct a hardware reset for AT8030 every time a link loss is
|
|
@@ -287,6 +365,26 @@ static void at803x_link_change_notify(st
|
|
} else {
|
|
priv->phy_reset = false;
|
|
}
|
|
+ }
|
|
+ if (pdata->fixup_rgmii_tx_delay &&
|
|
+ phydev->speed != priv->prev_speed) {
|
|
+ switch (phydev->speed) {
|
|
+ case SPEED_10:
|
|
+ case SPEED_100:
|
|
+ at803x_dbg_reg_set(phydev,
|
|
+ AT803X_DEBUG_SYSTEM_MODE_CTRL,
|
|
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
|
|
+ break;
|
|
+ case SPEED_1000:
|
|
+ at803x_dbg_reg_clr(phydev,
|
|
+ AT803X_DEBUG_SYSTEM_MODE_CTRL,
|
|
+ AT803X_DEBUG_RGMII_TX_CLK_DLY);
|
|
+ break;
|
|
+ default:
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ priv->prev_speed = phydev->speed;
|
|
}
|
|
}
|
|
|
|
--- /dev/null
|
|
+++ b/include/linux/platform_data/phy-at803x.h
|
|
@@ -0,0 +1,11 @@
|
|
+#ifndef _PHY_AT803X_PDATA_H
|
|
+#define _PHY_AT803X_PDATA_H
|
|
+
|
|
+struct at803x_platform_data {
|
|
+ int disable_smarteee:1;
|
|
+ int enable_rgmii_tx_delay:1;
|
|
+ int enable_rgmii_rx_delay:1;
|
|
+ int fixup_rgmii_tx_delay:1;
|
|
+};
|
|
+
|
|
+#endif /* _PHY_AT803X_PDATA_H */
|