mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
80 lines
2.9 KiB
Diff
80 lines
2.9 KiB
Diff
From 78b59478f96887aa293670f6dd494628a3714526 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
Date: Fri, 8 Sep 2017 15:11:53 +0100
|
|
Subject: [PATCH 327/454] tc358743: Add support for 972Mbit/s link freq.
|
|
|
|
Adds register setups for running the CSI lanes at 972Mbit/s,
|
|
which allows 1080P50 UYVY down 2 lanes.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
|
---
|
|
drivers/media/i2c/tc358743.c | 47 +++++++++++++++++++++++++-----------
|
|
1 file changed, 33 insertions(+), 14 deletions(-)
|
|
|
|
--- a/drivers/media/i2c/tc358743.c
|
|
+++ b/drivers/media/i2c/tc358743.c
|
|
@@ -1803,6 +1803,7 @@ static int tc358743_probe_of(struct tc35
|
|
/*
|
|
* The CSI bps per lane must be between 62.5 Mbps and 1 Gbps.
|
|
* The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60.
|
|
+ * 972 Mbps allows 1080P50 UYVY over 2-lane.
|
|
*/
|
|
bps_pr_lane = 2 * endpoint->link_frequencies[0];
|
|
if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) {
|
|
@@ -1815,23 +1816,41 @@ static int tc358743_probe_of(struct tc35
|
|
state->pdata.refclk_hz * state->pdata.pll_prd;
|
|
|
|
/*
|
|
- * FIXME: These timings are from REF_02 for 594 Mbps per lane (297 MHz
|
|
- * link frequency). In principle it should be possible to calculate
|
|
+ * FIXME: These timings are from REF_02 for 594 or 972 Mbps per lane
|
|
+ * (297 MHz or 486 MHz link frequency).
|
|
+ * In principle it should be possible to calculate
|
|
* them based on link frequency and resolution.
|
|
*/
|
|
- if (bps_pr_lane != 594000000U)
|
|
+ switch (bps_pr_lane) {
|
|
+ default:
|
|
dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane);
|
|
- state->pdata.lineinitcnt = 0xe80;
|
|
- state->pdata.lptxtimecnt = 0x003;
|
|
- /* tclk-preparecnt: 3, tclk-zerocnt: 20 */
|
|
- state->pdata.tclk_headercnt = 0x1403;
|
|
- state->pdata.tclk_trailcnt = 0x00;
|
|
- /* ths-preparecnt: 3, ths-zerocnt: 1 */
|
|
- state->pdata.ths_headercnt = 0x0103;
|
|
- state->pdata.twakeup = 0x4882;
|
|
- state->pdata.tclk_postcnt = 0x008;
|
|
- state->pdata.ths_trailcnt = 0x2;
|
|
- state->pdata.hstxvregcnt = 0;
|
|
+ case 594000000U:
|
|
+ state->pdata.lineinitcnt = 0xe80;
|
|
+ state->pdata.lptxtimecnt = 0x003;
|
|
+ /* tclk-preparecnt: 3, tclk-zerocnt: 20 */
|
|
+ state->pdata.tclk_headercnt = 0x1403;
|
|
+ state->pdata.tclk_trailcnt = 0x00;
|
|
+ /* ths-preparecnt: 3, ths-zerocnt: 1 */
|
|
+ state->pdata.ths_headercnt = 0x0103;
|
|
+ state->pdata.twakeup = 0x4882;
|
|
+ state->pdata.tclk_postcnt = 0x008;
|
|
+ state->pdata.ths_trailcnt = 0x2;
|
|
+ state->pdata.hstxvregcnt = 0;
|
|
+ break;
|
|
+ case 972000000U:
|
|
+ state->pdata.lineinitcnt = 0x1b58;
|
|
+ state->pdata.lptxtimecnt = 0x007;
|
|
+ /* tclk-preparecnt: 6, tclk-zerocnt: 40 */
|
|
+ state->pdata.tclk_headercnt = 0x2806;
|
|
+ state->pdata.tclk_trailcnt = 0x00;
|
|
+ /* ths-preparecnt: 6, ths-zerocnt: 8 */
|
|
+ state->pdata.ths_headercnt = 0x0806;
|
|
+ state->pdata.twakeup = 0x4268;
|
|
+ state->pdata.tclk_postcnt = 0x008;
|
|
+ state->pdata.ths_trailcnt = 0x5;
|
|
+ state->pdata.hstxvregcnt = 0;
|
|
+ break;
|
|
+ }
|
|
|
|
state->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_LOW);
|