mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
81 lines
2.3 KiB
Diff
81 lines
2.3 KiB
Diff
From 60e945e3c654aae415773a500b021914461ae928 Mon Sep 17 00:00:00 2001
|
|
From: Matthias Reichl <hias@horus.com>
|
|
Date: Thu, 22 Feb 2018 11:55:06 +0100
|
|
Subject: [PATCH 229/454] ASoC: pcm512x: implement set_tdm_slot interface
|
|
|
|
PCM512x can accept data padded with additional BCLK cycles
|
|
but the driver currently lacks an interface to configure this.
|
|
|
|
This leads to the problem that S24_LE format in master mode
|
|
can result in non-integer clock divisors and pcm512x running
|
|
at a rather off rate.
|
|
|
|
For example 48kHz with 48fs BCLK and SCLK at 24.576MHz uses
|
|
a divisor of 10 (rounded down from 10.6666) and results in a
|
|
51.2kHz LRCLK. With 64fs BCLK a divisor of 8 is used and
|
|
LRCLK runs at exactly 48kHz.
|
|
|
|
Fix this by providing a minimal set_tdm_slot implementation
|
|
so machine drivers can optionally configure custom BCLK ratios.
|
|
|
|
Signed-off-by: Matthias Reichl <hias@horus.com>
|
|
---
|
|
sound/soc/codecs/pcm512x.c | 28 +++++++++++++++++++++++++++-
|
|
1 file changed, 27 insertions(+), 1 deletion(-)
|
|
|
|
--- a/sound/soc/codecs/pcm512x.c
|
|
+++ b/sound/soc/codecs/pcm512x.c
|
|
@@ -53,6 +53,7 @@ struct pcm512x_priv {
|
|
unsigned long overclock_pll;
|
|
unsigned long overclock_dac;
|
|
unsigned long overclock_dsp;
|
|
+ int lrclk_div;
|
|
};
|
|
|
|
/*
|
|
@@ -851,7 +852,10 @@ static int pcm512x_set_dividers(struct s
|
|
int fssp;
|
|
int gpio;
|
|
|
|
- lrclk_div = snd_soc_params_to_frame_size(params);
|
|
+ if (pcm512x->lrclk_div)
|
|
+ lrclk_div = pcm512x->lrclk_div;
|
|
+ else
|
|
+ lrclk_div = snd_soc_params_to_frame_size(params);
|
|
if (lrclk_div == 0) {
|
|
dev_err(dev, "No LRCLK?\n");
|
|
return -EINVAL;
|
|
@@ -1319,10 +1323,32 @@ static int pcm512x_set_fmt(struct snd_so
|
|
return 0;
|
|
}
|
|
|
|
+static int pcm512x_set_tdm_slot(struct snd_soc_dai *dai,
|
|
+ unsigned int tx_mask, unsigned int rx_mask,
|
|
+ int slots, int width)
|
|
+{
|
|
+ struct snd_soc_codec *codec = dai->codec;
|
|
+ struct pcm512x_priv *pcm512x = snd_soc_codec_get_drvdata(codec);
|
|
+
|
|
+ switch (slots) {
|
|
+ case 0:
|
|
+ pcm512x->lrclk_div = 0;
|
|
+ return 0;
|
|
+ case 2:
|
|
+ if (tx_mask != 0x03 || rx_mask != 0x03)
|
|
+ return -EINVAL;
|
|
+ pcm512x->lrclk_div = slots * width;
|
|
+ return 0;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+}
|
|
+
|
|
static const struct snd_soc_dai_ops pcm512x_dai_ops = {
|
|
.startup = pcm512x_dai_startup,
|
|
.hw_params = pcm512x_hw_params,
|
|
.set_fmt = pcm512x_set_fmt,
|
|
+ .set_tdm_slot = pcm512x_set_tdm_slot,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver pcm512x_dai = {
|