openwrt/target/linux/ramips
FUKAUMI Naoki 6b0b526a4f ramips: add support for Buffalo WCR-1166DS
Buffalo WCR-1166DS is a small wireless router with

 - MT7628AN + MT7612E
 - 64MiB DDR2 SDRAM
 - 16MiB SPI flash
 - 2T2R 11ac/a/b/g/n Wi-Fi
 - 2x 10/100M ethernet switch
 - 8x programmable LED
 - 3x button
 - UART pad on PCB (J2: 3.3V, GND, TX, RX)

factory image can be installed via stock web UI.

due to the "dual image" function in the bootloader, the second half of
the SPI flash ("firmware2" partition) cannot be used as a part of the
file system.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2017-01-31 11:10:58 +01:00
..
base-files ramips: add support for Buffalo WCR-1166DS 2017-01-31 11:10:58 +01:00
dts ramips: add support for Buffalo WCR-1166DS 2017-01-31 11:10:58 +01:00
image ramips: add support for Buffalo WCR-1166DS 2017-01-31 11:10:58 +01:00
mt7620 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
mt7621 ramips: Add I2C driver to the default kernel config 2017-01-15 17:43:05 +01:00
mt7628 ramips: add support for Buffalo WCR-1166DS 2017-01-31 11:10:58 +01:00
mt7688 switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
patches-4.4 ramips: add support for Buffalo WCR-1166DS 2017-01-31 11:10:58 +01:00
rt288x ramips/rt288x: switch CPU_TYPE to 24kc 2017-01-24 13:15:01 +01:00
rt305x switch to the new usbport LED trigger 2016-10-19 12:09:45 +02:00
rt3883 ramips: enable 4K sector support in kernel config 2016-09-13 22:06:08 +02:00
Makefile build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
modules.mk ramips: add back the i2c-mt7621 module 2017-01-15 20:45:59 +01:00