openwrt/target/linux/ath79
Adrian Schmutzler 866ad46662 ath79: add support for the TP-Link WBS210 v1
Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 2.4GHz N based built into SoC
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-16 14:42:15 +02:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add mikrotik subtarget 2020-03-17 11:50:47 +01:00
dts ath79: add support for the TP-Link WBS210 v1 2020-06-16 14:42:15 +02:00
files ath79: add Mikrotik rb4xx series drivers 2020-06-15 21:16:18 +02:00
generic ath79: add support for the TP-Link WBS210 v1 2020-06-16 14:42:15 +02:00
image ath79: add support for the TP-Link WBS210 v1 2020-06-16 14:42:15 +02:00
mikrotik treewide: drop shebang from non-executable target files 2020-06-16 14:26:33 +02:00
nand ath79/nand: add support for Netgear WNDR4300SW 2020-05-24 14:44:00 +02:00
patches-4.19 ath79: add Mikrotik rb4xx series drivers 2020-06-15 21:16:18 +02:00
patches-5.4 ath79: add Mikrotik rb4xx series drivers 2020-06-15 21:16:18 +02:00
tiny ath79: add support for TP-Link TL-WR802N V1 and V2 2020-05-31 15:44:05 +02:00
config-4.19 ath79: enable wrgg MTD splitter 2020-06-11 19:44:36 +03:00
config-5.4 ath79: enable wrgg MTD splitter 2020-06-11 19:44:36 +03:00
Makefile ath79: add mikrotik subtarget 2020-03-17 11:50:47 +01:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00