mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
51 lines
1.8 KiB
Diff
51 lines
1.8 KiB
Diff
From f7469d4973136acff2537c323a5377c217333bc8 Mon Sep 17 00:00:00 2001
|
|
From: Serge Schneider <serge@raspberrypi.org>
|
|
Date: Tue, 2 Oct 2018 17:13:48 +0100
|
|
Subject: [PATCH 429/454] overlays: add overrides for PoE HAT fan control
|
|
|
|
Signed-off-by: Serge Schneider <serge@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 13 ++++++++++---
|
|
arch/arm/boot/dts/overlays/rpi-poe-overlay.dts | 10 ++++++++++
|
|
2 files changed, 20 insertions(+), 3 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1596,9 +1596,16 @@ Params: touchscreen-size-x Touchscr
|
|
|
|
|
|
Name: rpi-poe
|
|
-Info: Raspberry Pi POE HAT
|
|
-Load: dtoverlay=rpi-poe
|
|
-Params: <None>
|
|
+Info: Raspberry Pi PoE HAT fan
|
|
+Load: dtoverlay=rpi-poe,<param>[=<val>]
|
|
+Params: poe_fan_temp0 Temperature (in millicelcius) at which the fan
|
|
+ turns on (default 50000)
|
|
+ poe_fan_temp0_hyst Temperature delta (in millicelcius) at which
|
|
+ the fan turns off (default 5000)
|
|
+ poe_fan_temp1 Temperature (in millicelcius) at which the fan
|
|
+ speeds up (default 55000)
|
|
+ poe_fan_temp1_hyst Temperature delta (in millicelcius) at which
|
|
+ the fan slows down (default 5000)
|
|
|
|
|
|
Name: rpi-proto
|
|
--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts
|
|
@@ -50,4 +50,14 @@
|
|
};
|
|
};
|
|
};
|
|
+
|
|
+ fragment@2 {
|
|
+ target-path = "/__overrides__";
|
|
+ __overlay__ {
|
|
+ poe_fan_temp0 = <&trip0>,"temperature:0";
|
|
+ poe_fan_temp0_hyst = <&trip0>,"hysteresis:0";
|
|
+ poe_fan_temp1 = <&trip1>,"temperature:0";
|
|
+ poe_fan_temp1_hyst = <&trip1>,"hysteresis:0";
|
|
+ };
|
|
+ };
|
|
};
|