openwrt/target/linux/ramips
Rosen Penev 26a6a6a60b ramips: add support for Belkin RT1800
Belkin RT1800 is an 802.11ax (Wi-Fi 6) router, based on MediaTek
MT7621A.

Specifications:
- SoC: MT7621 (880MHz, 2 Cores)
- RAM: 256 MB
- Flash: 128 MB NAND
- Wi-Fi:
  - MT7915D: 2.4/5 GHz (DBDC)
- Ethernet: 5x 1GiE MT7530
- USB: 1x USB 3.0
- UART: J4 (57600 baud)
  - Pinout: [3V3] (TXD) (RXD) (blank) (GND)

Notes:
* This device has a dual-boot partition scheme, but this firmware works
  only on boot partition 1.

Installation:

Upload the generated factory.bin image via the stock web firmware
updater.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-09-11 01:30:11 +02:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts ramips: add support for Belkin RT1800 2022-09-11 01:30:11 +02:00
files/drivers ramips: ethernet: ralink: add led_source dts-binding 2022-05-01 13:40:13 +09:00
image ramips: add support for Belkin RT1800 2022-09-11 01:30:11 +02:00
mt76x8 ramips: add support for Kroks Rt-Cse SIM Injector DS 2022-09-11 01:30:11 +02:00
mt7620 ramips: add config-5.15 for mt7620 subtarget 2022-09-10 22:52:20 +01:00
mt7621 ramips: add support for Belkin RT1800 2022-09-11 01:30:11 +02:00
patches-5.10 kernel: bump 5.10 to 5.10.134 2022-07-29 23:03:41 +02:00
patches-5.15 kernel: mtk_eth_soc: fix hw hash reporting for MT7986 2022-09-07 04:21:41 +01:00
rt288x kernel: Activate CONFIG_GPIOLIB in generic configuration 2022-08-10 21:36:17 +02:00
rt305x kernel: Activate CONFIG_GPIOLIB in generic configuration 2022-08-10 21:36:17 +02:00
rt3883 kernel: Activate CONFIG_GPIOLIB in generic configuration 2022-08-10 21:36:17 +02:00
Makefile ramips: add linux 5.15 support for mt7621 2022-03-27 21:36:40 +02:00
modules.mk ramips: rename mtk-hsdma to hsdma-mt7621 2021-03-04 23:43:02 -10:00