mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
58 lines
2.1 KiB
Diff
58 lines
2.1 KiB
Diff
From 649efe5db3900ed3bbfd3c3daa3b96d8fc0b9d68 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Fri, 22 Mar 2019 16:44:47 +0000
|
|
Subject: [PATCH] overlays: Fix multiple-instantiation of sc16is7xx*
|
|
|
|
The registration of the fixed clocks uses the node name as the clock
|
|
name, causing a clash if two clock nodes have the same name, regardless
|
|
of the path to the node. Fix the issue by overwriting the clock node
|
|
names using the value of the "addr" parameter, providing a crude
|
|
disambiguation. (A bit of string pasting to form "sc16is752_clk_<addr>"
|
|
would have been nice, but that is outside the abilities of the overlay
|
|
parameter mechanism.)
|
|
|
|
Also give the sc16is750-i2c overlay the xtal parameter for symmetry.
|
|
|
|
See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=235650
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 1 +
|
|
arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts | 3 ++-
|
|
arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts | 2 +-
|
|
3 files changed, 4 insertions(+), 2 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1725,6 +1725,7 @@ Info: Overlay for the NXP SC16IS750 UA
|
|
Load: dtoverlay=sc16is750-i2c,<param>=<val>
|
|
Params: int_pin GPIO used for IRQ (default 24)
|
|
addr Address (default 0x48)
|
|
+ xtal On-board crystal frequency (default 14745600)
|
|
|
|
|
|
Name: sc16is752-i2c
|
|
--- a/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/sc16is750-i2c-overlay.dts
|
|
@@ -31,7 +31,8 @@
|
|
|
|
__overrides__ {
|
|
int_pin = <&sc16is750>,"interrupts:0";
|
|
- addr = <&sc16is750>,"reg:0";
|
|
+ addr = <&sc16is750>,"reg:0",<&sc16is750_clk>,"name";
|
|
+ xtal = <&sc16is750>,"clock-frequency:0";
|
|
};
|
|
|
|
};
|
|
--- a/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/sc16is752-i2c-overlay.dts
|
|
@@ -34,7 +34,7 @@
|
|
|
|
__overrides__ {
|
|
int_pin = <&sc16is752>,"interrupts:0";
|
|
- addr = <&sc16is752>,"reg:0";
|
|
+ addr = <&sc16is752>,"reg:0",<&sc16is752_clk>,"name";
|
|
xtal = <&sc16is752>,"clock-frequency:0";
|
|
};
|
|
};
|