openwrt/target/linux/ath79
Andrew Cameron 550e5b2184 ath79: add support for TP-Link CPE605-v1
TP-Link CPE605-v1 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - 560/450/225 MHz (CPU/DDR/AHB)
 - 1x 10/100 Mbps Ethernet
 - 64 MB of DDR2 RAM
 - 8 MB of SPI-NOR Flash
 - 23dBi high-gain directional antenna and a dedicated metal reflector
 - Power, LAN, WLAN5G green LEDs
 - 3x green RSSI LEDs

Flashing instructions:
 Flash factory image through stock firmware WEB UI or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2022-12-13 23:17:27 +01:00
..
base-files/etc/hotplug.d/ieee80211 ath79: migrate Archer C5 5GHz radio device paths 2022-03-31 18:07:29 +02:00
dts ath79: add support for TP-Link CPE605-v1 2022-12-13 23:17:27 +01:00
files ath79: increase max tx ring buffer for ag71xx 2022-10-06 16:45:43 +02:00
generic ath79: add support for TP-Link CPE605-v1 2022-12-13 23:17:27 +01:00
image ath79: add support for TP-Link CPE605-v1 2022-12-13 23:17:27 +01:00
mikrotik ath79: move 5.15 testing kernel to common Makefile 2022-09-06 02:57:35 +02:00
nand ath79: convert Netgear R6100 radio calibration to nvmem-cells 2022-12-06 23:11:23 +01:00
patches-5.10 kernel: bump 5.10 to 5.10.157 2022-12-11 02:43:28 +01:00
patches-5.15 kernel: bump 5.15 to 5.15.81 2022-12-11 02:42:52 +01:00
tiny ath79: add support for TP-Link TL-WR941ND v5 2022-09-11 22:00:22 +02:00
config-5.10 kernel: mtd: backport SafeLoader parser 2022-10-19 07:07:14 +02:00
config-5.15 kernel: mtd: backport SafeLoader parser 2022-10-19 07:07:14 +02:00
Makefile ath79: switch to 5.15 as default kernel 2022-09-24 13:04:24 +02:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00