ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 00:11:13 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
261876a067
openwrt/target/linux/ramips/image/mt7621.mk
Sungbo Eo 261876a067 ramips: improve support for STORYLiNK SAP-G3200U3 
* Increase flash SPI frequency to 50MHz

  The maximum SPI frequency of MX25L6406EM2I is 86 MHz,
  but in this patch 50 MHz was chosen as a safe value.

* Update Ethernet MAC addresses

  Till now LAN/WAN MAC addresses were flipped
  compared to stock firmware.

* Fix Wi-Fi LEDs by adding mt76 led nodes

* Fix LAN port order

  LAN ports are in reverse order of switch ports.

* Fix the well-known "LZMA ERROR 1" error by using lzma-loader

* Set uImage name, which enables installation via stock web interface:

  1.  Upload **initramfs** image file to the web page.
  2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2024-03-10 16:32:14 +09:00

3142 lines
91 KiB
Makefile
Raw Blame History

#
# MT7621 Profiles
#
include ./common-sercomm.mk
include ./common-tp-link.mk
DEFAULT_SOC := mt7621
DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME DLINK_HWID
define Build/append-dlink-covr-metadata
echo -ne '{"supported_devices": "$(1)", "firmware": "' > $@metadata.tmp
$(MKHASH) md5 "$@" | head -c32 >> $@metadata.tmp
echo '"}' >> $@metadata.tmp
fwtool -I $@metadata.tmp $@
rm $@metadata.tmp
endef
define Build/arcadyan-trx
echo -ne "hsqs" > $@.hsqs
$(eval trx_magic=$(word 1,$(1)))
$(STAGING_DIR_HOST)/bin/otrx create $@.trx -M $(trx_magic) -f $@ \
-a 0x20000 -b 0x420000 -f $@.hsqs -a 1000
mv $@.trx $@
dd if=/dev/zero bs=1024 count=1 >> $@.tail
echo -ne "HDR0" | dd of=$@.tail bs=1 seek=$$((0x10c)) count=4 \
conv=notrunc 2>/dev/null
dd if=$@.tail >> $@ 2>/dev/null
rm $@.hsqs $@.tail
endef
define Build/gemtek-trailer
printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
endef
define Build/h3c-blank-header
dd if=/dev/zero of=$@.blank bs=160 count=1
cat $@ >> $@.blank
mv $@.blank $@
endef
define Build/haier-sim_wr1800k-factory
mkdir -p "$@.tmp"
mv "$@" "$@.tmp/UploadBrush-bin.img"
$(MKHASH) md5 "$@.tmp/UploadBrush-bin.img" | head -c32 > "$@.tmp/check_MD5.txt"
$(TAR) -czf "$@.tmp.tgz" -C "$@.tmp" UploadBrush-bin.img check_MD5.txt
$(STAGING_DIR_HOST)/bin/openssl aes-256-cbc -e -salt -in "$@.tmp.tgz" -out "$@" -k QiLunSmartWL
printf %32s $(DEVICE_MODEL) >> "$@"
rm -rf "$@.tmp" "$@.tmp.tgz"
endef
define Build/iodata-mstc-header
( \
data_size_crc="$$(dd if=$@ ibs=64 skip=1 2>/dev/null | gzip -c | \
tail -c 8 | od -An -tx8 --endian little | tr -d ' \n')"; \
echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
dd of=$@ bs=8 count=1 seek=7 conv=notrunc 2>/dev/null; \
)
dd if=/dev/zero of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null
( \
header_crc="$$(dd if=$@ bs=64 count=1 2>/dev/null | gzip -c | \
tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
echo -ne "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
dd of=$@ bs=4 count=1 seek=1 conv=notrunc 2>/dev/null; \
)
endef
define Build/iodata-mstc-header2
$(eval model=$(word 1,$(1)))
$(eval model_id=$(word 2,$(1)))
( \
fw_len_crc=$$(gzip -c $@ | tail -c 8 | \
od -An -tx8 --endian little); \
printf "\x03\x1d\x61\x29\x07$(model)" | \
dd bs=21 count=1 conv=sync 2>/dev/null; \
printf "0.00.000" | dd bs=16 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $(REVISION) | cut -d- -f1 | head -c8)" | \
dd bs=9 count=1 conv=sync 2>/dev/null; \
printf "$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)" | \
dd bs=33 count=1 conv=sync 2>/dev/null; \
date -d "@$(SOURCE_DATE_EPOCH)" "+%F" | tr -d "\n" | \
dd bs=15 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $(model_id) | sed 's/../\\x&/g')" | \
dd bs=8 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $$fw_len_crc | sed 's/../\\x&/g')" | \
dd bs=14 count=1 conv=sync 2>/dev/null; \
cat $@; \
) > $@.new
( \
header_crc="$$(head -c116 $@.new | gzip -c | tail -c8 | \
od -An -tx4 -N4 --endian little)"; \
printf "$$(echo $$header_crc | sed 's/../\\x&/g')"; \
) | dd of=$@.new bs=4 oflag=seek_bytes seek=110 conv=notrunc
mv $@.new $@
endef
define Build/znet-header
$(eval version=$(word 1,$(1)))
( \
data_size_crc="$$(dd if=$@ 2>/dev/null | gzip -c | \
tail -c 8 | od -An -N4 -tx4 --endian big | tr -d ' \n')"; \
payload_len="$$(dd if=$@ bs=4 count=1 skip=1 2>/dev/null | od -An -tdI --endian big | tr -d ' \n')"; \
payload_size_crc="$$(dd if=$@ ibs=1 count=$$payload_len 2>/dev/null | gzip -c | \
tail -c 8 | od -An -N4 -tx4 --endian big | tr -d ' \n')"; \
echo -ne "\x5A\x4E\x45\x54" | dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tac | tr -d '\n')" | \
dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$$(echo $$data_size_crc | sed 's/../\\x&/g')" | \
dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$$(echo $$payload_size_crc | sed 's/../\\x&/g')" | \
dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "\x12\x34\x56\x78" | dd bs=4 count=1 conv=sync 2>/dev/null; \
echo -ne "$(version)" | dd bs=28 count=1 conv=sync 2>/dev/null; \
dd if=/dev/zero bs=262096 count=1 conv=sync 2>/dev/null | tr "\000" "\377"; \
cat $@; \
) > $@.new
mv $@.new $@
endef
define Build/belkin-header
$(eval magic=$(word 1,$(1)))
$(eval hw_ver=$(word 2,$(1)))
$(eval fw_ver=$(word 3,$(1)))
( \
type_fw_date=$$(printf "01%02x%02x%02x" \
$$(date -d "@$(SOURCE_DATE_EPOCH)" "+%-y %-m %-d")); \
hw_fw_ver=$$(printf "%02x%02x%02x%02x" \
$(hw_ver) $$(echo $(fw_ver) | cut -d. -f-3 | tr . ' ')); \
fw_len_crc=$$(gzip -c $@ | tail -c 8 | od -An -tx8 | tr -d ' \n'); \
fw_crc_len="$${fw_len_crc:8:8}$${fw_len_crc:0:8}"; \
\
printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
printf "$$(echo $${type_fw_date}$${hw_fw_ver} | \
sed 's/../\\x&/g')"; \
printf "$$(echo $${fw_crc_len}$${fw_crc_len} | \
sed 's/../\\x&/g')"; \
printf "\x5c\x78\x00\x00"; \
cat $@; \
) > $@.new
mv $@.new $@
endef
define Build/ubnt-erx-factory-image
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
echo '21001:7' > $(1).compat; \
$(TAR) -cf $(1) --transform='s/^.*/compat/' $(1).compat; \
\
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp/' $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE); \
$(MKHASH) md5 $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) > $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/vmlinux.tmp.md5/' $(1).md5; \
\
echo "dummy" > $(1).rootfs; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp/' $(1).rootfs; \
\
$(MKHASH) md5 $(1).rootfs > $(1).md5; \
$(TAR) -rf $(1) --transform='s/^.*/squashfs.tmp.md5/' $(1).md5; \
\
echo '$(BOARD) $(VERSION_CODE) $(VERSION_NUMBER)' > $(1).version; \
$(TAR) -rf $(1) --transform='s/^.*/version.tmp/' $(1).version; \
\
$(CP) $(1) $(BIN_DIR)/; \
else \
echo "WARNING: initramfs kernel image too big, cannot generate factory image (actual $$(stat -c%s $@); max $(KERNEL_SIZE))" >&2; \
fi
endef
define Build/zytrx-header
$(eval board=$(word 1,$(1)))
$(eval version=$(word 2,$(1)))
$(STAGING_DIR_HOST)/bin/zytrx -B '$(board)' -v '$(version)' -i $@ -o $@.new
mv $@.new $@
endef
define Build/zyxel-nwa-fit
$(TOPDIR)/scripts/mkits-zyxel-fit.sh \
$@.its $@ "6b e1 6f e1 ff ff ff ff ff ff"
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Device/dsa-migration
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
endef
define Device/nand
$(Device/dsa-migration)
BLOCKSIZE := 128k
KERNEL_SIZE := 4096k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/adslr_g7
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ADSLR
DEVICE_MODEL := G7
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += adslr_g7
define Device/afoundry_ew1200
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := AFOUNDRY
DEVICE_MODEL := EW1200
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-mt7603 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += ew1200
endef
TARGET_DEVICES += afoundry_ew1200
define Device/alfa-network_ax1800rm
$(Device/dsa-migration)
IMAGE_SIZE := 15488k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AX1800RM
DEVICE_PACKAGES := kmod-mt7915-firmware
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += recovery.bin
IMAGE/recovery.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += alfa-network_ax1800rm
define Device/alfa-network_quad-e4g
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := Quad-E4G
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls
SUPPORTED_DEVICES += quad-e4g
endef
TARGET_DEVICES += alfa-network_quad-e4g
define Device/ampedwireless_ally_common
$(Device/nand)
DEVICE_VENDOR := Amped Wireless
DEVICE_PACKAGES := kmod-mt7615-firmware
IMAGE_SIZE := 32768k
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'flashable-initramfs' |\
edimax-header -s CSYS -m RN68 -f 0x001c0000 -S 0x01100000
endef
define Device/ampedwireless_ally-r1900k
$(Device/ampedwireless_ally_common)
DEVICE_MODEL := ALLY-R1900K
DEVICE_PACKAGES += kmod-usb3
endef
TARGET_DEVICES += ampedwireless_ally-r1900k
define Device/ampedwireless_ally-00x19k
$(Device/ampedwireless_ally_common)
DEVICE_MODEL := ALLY-00X19K
endef
TARGET_DEVICES += ampedwireless_ally-00x19k
define Device/arcadyan_we420223-99
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := WE420223-99
DEVICE_ALT0_VENDOR := KPN
DEVICE_ALT0_MODEL := Experia WiFi
IMAGE_SIZE := 32128k
KERNEL_SIZE := 4352k
UBINIZE_OPTS := -E 5
PAGESIZE := 1
SUBPAGESIZE := 1
VID_HDR_OFFSET := 64
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x746f435d
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += arcadyan_we420223-99
define Device/asiarf_ap7621-001
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AP7621-001
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += asiarf_ap7621-001
define Device/asiarf_ap7621-nv1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := AsiaRF
DEVICE_MODEL := AP7621-NV1
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += asiarf_ap7621-nv1
define Device/asus_rp-ac56
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RP-AC56
IMAGE_SIZE := 16000k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 \
kmod-i2c-ralink kmod-sound-mt7620 -uboot-envtools
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
endef
TARGET_DEVICES += asus_rp-ac56
define Device/asus_rp-ac87
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RP-AC87
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware rssileds -uboot-envtools
endef
TARGET_DEVICES += asus_rp-ac87
define Device/asus_rt-ac57u-v1
$(Device/dsa-migration)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC57U
DEVICE_VARIANT := v1
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AC1200GU
IMAGE_SIZE := 16064k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += asus,rt-ac57u
endef
TARGET_DEVICES += asus_rt-ac57u-v1
define Device/asus_rt-ac65p
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC65P
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
endef
TARGET_DEVICES += asus_rt-ac65p
define Device/asus_rt-ac85p
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC85P
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
endef
TARGET_DEVICES += asus_rt-ac85p
define Device/asus_rt-n56u-b1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-N56U
DEVICE_VARIANT := B1
IMAGE_SIZE := 16064k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += asus_rt-n56u-b1
define Device/asus_rt-ax53u
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX53U
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AX1800U
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-ax53u
define Device/asus_rt-ax54
$(Device/nand)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX54
DEVICE_ALT0_VENDOR := ASUS
DEVICE_ALT0_MODEL := RT-AX54HP
DEVICE_ALT1_VENDOR := ASUS
DEVICE_ALT1_MODEL := RT-AX1800HP
DEVICE_ALT2_VENDOR := ASUS
DEVICE_ALT2_MODEL := RT-AX1800S
IMAGE_SIZE := 51200k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += asus_rt-ax54
define Device/beeline_smartbox-flash
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox Flash
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x746f435d | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += beeline_smartbox-flash
define Device/beeline_smartbox-giga
$(Device/sercomm_dxx)
IMAGE_SIZE := 24576k
SERCOMM_HWID := DBE
SERCOMM_HWVER := 10100
SERCOMM_SWVER := 1001
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox GIGA
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb3
endef
TARGET_DEVICES += beeline_smartbox-giga
define Device/beeline_smartbox-pro
$(Device/sercomm_s1500)
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox PRO
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := S1500 AWI
IMAGE_SIZE := 34816k
IMAGE/factory.img := append-kernel | sercomm-kernel-factory | \
sercomm-reset-slot1-chksum | append-ubi | check-size | \
sercomm-factory-cqr | sercomm-append-tail | sercomm-mkhash
SERCOMM_HWID := AWI
SERCOMM_HWVER := 10000
SERCOMM_ROOTFS2_OFFSET := 0x3d00000
SERCOMM_SWVER := 2020
endef
TARGET_DEVICES += beeline_smartbox-pro
define Device/beeline_smartbox-turbo
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := DF3
SERCOMM_HWVER := 10200
SERCOMM_SWVER := 1004
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox TURBO
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += beeline_smartbox-turbo
define Device/beeline_smartbox-turbo-plus
$(Device/sercomm_cxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := CQR
SERCOMM_HWVER := 10000
SERCOMM_SWVER := 2010
DEVICE_VENDOR := Beeline
DEVICE_MODEL := SmartBox TURBO+
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += beeline_smartbox-turbo-plus
define Device/belkin_rt1800
$(Device/nand)
IMAGE_SIZE := 49152k
DEVICE_VENDOR := Belkin
DEVICE_MODEL := RT1800
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | belkin-header RT18 1 9.9.9
endef
TARGET_DEVICES += belkin_rt1800
define Device/buffalo_wsr-1166dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
IMAGE_SIZE := 15936k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WSR-1166DHP
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
SUPPORTED_DEVICES += wsr-1166
endef
TARGET_DEVICES += buffalo_wsr-1166dhp
define Device/buffalo_wsr-2533dhpl
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7936k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WSR-2533DHPL
DEVICE_ALT0_VENDOR := Buffalo
DEVICE_ALT0_MODEL := WSR-2533DHP
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += buffalo_wsr-2533dhpl
define Device/buffalo_wsr-600dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WSR-600DHP
DEVICE_PACKAGES := kmod-mt7603 kmod-rt2800-pci -uboot-envtools
SUPPORTED_DEVICES += wsr-600
endef
TARGET_DEVICES += buffalo_wsr-600dhp
define Device/bolt_arion
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := BOLT
DEVICE_MODEL := Arion
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2
endef
TARGET_DEVICES += bolt_arion
define Device/comfast_cf-e390ax
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := ComFast
DEVICE_MODEL := CF-E390AX
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += comfast_cf-e390ax
define Device/comfast_cf-ew72-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := ComFast
DEVICE_MODEL := CF-EW72 V2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += comfast_cf-ew72-v2
define Device/cudy_m1800
$(Device/dsa-migration)
DEVICE_VENDOR := Cudy
DEVICE_MODEL := M1800
IMAGE_SIZE := 16064k
UIMAGE_NAME := R17
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += cudy_m1800
define Device/cudy_wr1300-v1
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += cudy,wr1300 R10
endef
TARGET_DEVICES += cudy_wr1300-v1
define Device/cudy_wr1300-v2
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
SUPPORTED_DEVICES += cudy,wr1300 R23
endef
TARGET_DEVICES += cudy_wr1300-v2
define Device/cudy_wr1300-v3
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR1300
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
SUPPORTED_DEVICES += cudy,wr1300 R30
endef
TARGET_DEVICES += cudy_wr1300-v3
define Device/cudy_wr2100
$(Device/dsa-migration)
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR2100
IMAGE_SIZE := 15872k
UIMAGE_NAME := R11
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += cudy_wr2100
define Device/cudy_x6-v1
$(Device/dsa-migration)
IMAGE_SIZE := 32256k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := X6
DEVICE_VARIANT := v1
UIMAGE_NAME := R13
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
SUPPORTED_DEVICES += cudy,x6 R13
endef
TARGET_DEVICES += cudy_x6-v1
define Device/cudy_x6-v2
$(Device/dsa-migration)
IMAGE_SIZE := 15872k
DEVICE_VENDOR := Cudy
DEVICE_MODEL := X6
DEVICE_VARIANT := v2
UIMAGE_NAME := R30
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
SUPPORTED_DEVICES += cudy,x6 R30
endef
TARGET_DEVICES += cudy_x6-v2
define Device/dlink_covr-x1860-a1
$(Device/dsa-migration)
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 8192k
IMAGE_SIZE := 40960k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := COVR-X1860
DEVICE_VARIANT := A1
DEVICE_PACKAGES := kmod-mt7915-firmware
UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin recovery.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \
append-dlink-covr-metadata $$(DEVICE_MODEL) | \
dlink-sge-image $$(DEVICE_MODEL)
endef
TARGET_DEVICES += dlink_covr-x1860-a1
define Device/dlink_dxx-1xx0-x1
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware rssileds -uboot-envtools
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | \
pad-rootfs -x 60 | append-md5sum-ascii-salted ffff | \
append-string $$$$(DLINK_HWID) | check-size
endef
define Device/dlink_dap-1620-b1
$(Device/dlink_dxx-1xx0-x1)
DEVICE_MODEL := DAP-1620
DEVICE_VARIANT := B1
DLINK_HWID := MT76XMT7621-RP-PR2475-NA
endef
TARGET_DEVICES += dlink_dap-1620-b1
define Device/dlink_dap-x1860-a1
$(Device/nand)
IMAGE_SIZE := 53248k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-X1860
DEVICE_VARIANT := A1
KERNEL_SIZE := 8192k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size | elx-header 011b0060 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7915-firmware rssileds -uboot-envtools
endef
TARGET_DEVICES += dlink_dap-x1860-a1
define Device/dlink_dir-8xx-a1
$(Device/dsa-migration)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
KERNEL := $$(KERNEL) | uimage-sgehdr
IMAGES += recovery.bin factory.bin
IMAGE/recovery.bin := append-kernel | append-rootfs | check-size
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | dlink-sge-image $$$$(DEVICE_MODEL)
endef
define Device/dlink_dir-8xx-r1
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
KERNEL_INITRAMFS := $$(KERNEL)
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
endef
define Device/dlink_dir-xx60-a1
$(Device/nand)
IMAGE_SIZE := 40960k
DEVICE_VENDOR := D-Link
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
KERNEL := $$(KERNEL) | uimage-sgehdr
IMAGES += recovery.bin
IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
endef
define Device/dlink_dir-1935-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-1935
DEVICE_VARIANT := A1
DEVICE_PACKAGES += kmod-usb3
endef
TARGET_DEVICES += dlink_dir-1935-a1
define Device/dlink_dir-1960-a1
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-1960
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-1960-a1
define Device/dlink_dir-2640-a1
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-2640
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-2640-a1
define Device/dlink_dir-2660-a1
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-2660
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-2660-a1
define Device/dlink_dir-3060-a1
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-3060
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-3060-a1
define Device/dlink_dir-853-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-853
DEVICE_VARIANT := A1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += dlink_dir-853-a1
define Device/dlink_dir-853-a3
$(Device/dlink_dir-xx60-a1)
DEVICE_MODEL := DIR-853
DEVICE_VARIANT := A3
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/recovery.bin) | dlink-sge-image $$(DEVICE_MODEL)
endef
TARGET_DEVICES += dlink_dir-853-a3
define Device/dlink_dir-853-r1
$(Device/dlink_dir-8xx-r1)
DEVICE_MODEL := DIR-853
DEVICE_VARIANT := R1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += dlink_dir-853-r1
define Device/dlink_dir-860l-b1
$(Device/dsa-migration)
$(Device/seama-lzma-loader)
SEAMA_SIGNATURE := wrgac13_dlink.2013gui_dir860lb
IMAGE_SIZE := 16064k
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-860L
DEVICE_VARIANT := B1
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
SUPPORTED_DEVICES += dir-860l-b1
endef
TARGET_DEVICES += dlink_dir-860l-b1
define Device/dlink_dir-867-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-867
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-867-a1
define Device/dlink_dir-878-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-878
DEVICE_VARIANT := A1
endef
TARGET_DEVICES += dlink_dir-878-a1
define Device/dlink_dir-878-r1
$(Device/dlink_dir-8xx-r1)
DEVICE_MODEL := DIR-878
DEVICE_VARIANT := R1
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \
sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \
ab0dff19af8842cdb70a86b4b68d23f7
endef
TARGET_DEVICES += dlink_dir-878-r1
define Device/dlink_dir-882-a1
$(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-882
DEVICE_VARIANT := A1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += dlink_dir-882-a1
define Device/dlink_dir-882-r1
$(Device/dlink_dir-8xx-r1)
DEVICE_MODEL := DIR-882
DEVICE_VARIANT := R1
DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \
sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \
ab0dff19af8842cdb70a86b4b68d23f7
endef
TARGET_DEVICES += dlink_dir-882-r1
define Device/dlink_dra-1360-a1
$(Device/dlink_dxx-1xx0-x1)
DEVICE_MODEL := DRA-1360
DEVICE_VARIANT := A1
DLINK_HWID := MT76XMT7621-RP-RA1360-NA
endef
TARGET_DEVICES += dlink_dra-1360-a1
define Device/dual-q_h721
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Dual-Q
DEVICE_MODEL := H721
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += dual-q_h721
define Device/d-team_newifi-d2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := D-Team
DEVICE_MODEL := Newifi D2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += d-team_newifi-d2
define Device/d-team_pbr-m1
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := PandoraBox
DEVICE_MODEL := PBR-M1
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += pbr-m1
endef
TARGET_DEVICES += d-team_pbr-m1
define Device/edimax_ra21s
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Edimax
DEVICE_MODEL := RA21S
DEVICE_ALT0_VENDOR := Edimax
DEVICE_ALT0_MODEL := Gemini RA21S
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 02020040 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += edimax_ra21s
define Device/edimax_re23s
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15680k
DEVICE_VENDOR := Edimax
DEVICE_MODEL := RE23S
DEVICE_ALT0_VENDOR := Edimax
DEVICE_ALT0_MODEL := Gemini RE23S
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
check-size | append-metadata
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN76 -f 0x70000 -S 0x01100000 | pad-rootfs | \
check-size
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += edimax_re23s
define Device/edimax_rg21s
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Edimax
DEVICE_MODEL := Gemini AC2600 RG21S
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 02020038 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += edimax_rg21s
define Device/elecom_wrc-1167ghbk2-s
$(Device/dsa-migration)
IMAGE_SIZE := 15488k
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-1167GHBK2-S
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elecom-wrc-gs-factory WRC-1167GHBK2-S 0.00
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += elecom_wrc-1167ghbk2-s
define Device/elecom_wrc-gs
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ELECOM
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elecom-wrc-gs-factory $$$$(ELECOM_HWNAME) 0.00 -N | \
append-string MT7621_ELECOM_$$$$(ELECOM_HWNAME)
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
define Device/elecom_wrc-1167gs2-b
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1167GS2-B
ELECOM_HWNAME := WRC-1167GS2
endef
TARGET_DEVICES += elecom_wrc-1167gs2-b
define Device/elecom_wrc-1167gst2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WRC-1167GST2
ELECOM_HWNAME := WRC-1167GST2
endef
TARGET_DEVICES += elecom_wrc-1167gst2
define Device/elecom_wrc-1750gs
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1750GS
ELECOM_HWNAME := WRC-1750GS
endef
TARGET_DEVICES += elecom_wrc-1750gs
define Device/elecom_wrc-1750gst2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WRC-1750GST2
ELECOM_HWNAME := WRC-1750GST2
endef
TARGET_DEVICES += elecom_wrc-1750gst2
define Device/elecom_wrc-1750gsv
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1750GSV
ELECOM_HWNAME := WRC-1750GSV
endef
TARGET_DEVICES += elecom_wrc-1750gsv
define Device/elecom_wrc-1900gst
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-1900GST
ELECOM_HWNAME := WRC-1900GST
endef
TARGET_DEVICES += elecom_wrc-1900gst
define Device/elecom_wrc-2533ghbk2-t
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-2533GHBK2-T
IMAGE_SIZE := 7808k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 0107003b 8844A2D168B45A2D | \
elecom-product-header WRC-2533GHBK2-T
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += elecom_wrc-2533ghbk2-t
define Device/elecom_wrc-2533ghbk-i
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-2533GHBK-I
IMAGE_SIZE := 9856k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 0107002d 8844A2D168B45A2D | \
elecom-product-header WRC-2533GHBK-I
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += elecom_wrc-2533ghbk-i
define Device/elecom_wrc-2533gs2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-2533GS2
ELECOM_HWNAME := WRC-2533GS2
endef
TARGET_DEVICES += elecom_wrc-2533gs2
define Device/elecom_wrc-2533gst
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 11264k
DEVICE_MODEL := WRC-2533GST
ELECOM_HWNAME := WRC-2533GST
endef
TARGET_DEVICES += elecom_wrc-2533gst
define Device/elecom_wrc-2533gst2
$(Device/elecom_wrc-gs)
IMAGE_SIZE := 24576k
DEVICE_MODEL := WRC-2533GST2
ELECOM_HWNAME := WRC-2533GST2
endef
TARGET_DEVICES += elecom_wrc-2533gst2
define Device/etisalat_s3
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := DDK
SERCOMM_HWVER := 10000
SERCOMM_SWVER := 4009
DEVICE_VENDOR := Etisalat
DEVICE_MODEL := S3
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := S3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += etisalat_s3
define Device/firefly_firewrt
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Firefly
DEVICE_MODEL := FireWRT
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
SUPPORTED_DEVICES += firewrt
endef
TARGET_DEVICES += firefly_firewrt
define Device/gehua_ghl-r-001
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := GeHua
DEVICE_MODEL := GHL-R-001
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += gehua_ghl-r-001
define Device/glinet_gl-mt1300
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT1300
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += glinet_gl-mt1300
define Device/gnubee_gb-pc1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := GB-PC1
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
IMAGE_SIZE := 32448k
endef
TARGET_DEVICES += gnubee_gb-pc1
define Device/gnubee_gb-pc2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := GnuBee
DEVICE_MODEL := GB-PC2
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
IMAGE_SIZE := 32448k
endef
TARGET_DEVICES += gnubee_gb-pc2
define Device/hanyang_hyc-g920
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Hanyang
DEVICE_MODEL := CJ-Hello HYC-G920
IMAGE_SIZE := 15744k
DEVICE_PACKAGES := kmod-usb3 kmod-mt76x2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += hanyang_hyc-g920
define Device/h3c_tx180x
$(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 120832k
KERNEL_LOADADDR := 0x82000000
KERNEL_INITRAMFS := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL := $$(KERNEL_INITRAMFS) | h3c-blank-header
DEVICE_VENDOR := H3C
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
define Device/h3c_tx1800-plus
$(Device/h3c_tx180x)
DEVICE_MODEL := TX1800 Plus
endef
TARGET_DEVICES += h3c_tx1800-plus
define Device/h3c_tx1801-plus
$(Device/h3c_tx180x)
DEVICE_MODEL := TX1801 Plus
endef
TARGET_DEVICES += h3c_tx1801-plus
define Device/h3c_tx1806
$(Device/h3c_tx180x)
DEVICE_MODEL := TX1806
endef
TARGET_DEVICES += h3c_tx1806
define Device/haier-sim_wr1800k
$(Device/nand)
IMAGE_SIZE := 125440k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
haier-sim_wr1800k-factory
endif
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
define Device/haier_har-20s2u1
$(Device/haier-sim_wr1800k)
DEVICE_VENDOR := Haier
DEVICE_MODEL := HAR-20S2U1
endef
TARGET_DEVICES += haier_har-20s2u1
define Device/hilink_hlk-7621a-evb
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := HiLink
DEVICE_MODEL := HLK-7621A evaluation board
DEVICE_PACKAGES += kmod-mt76x2 kmod-usb3 -uboot-envtools
IMAGE_SIZE := 32448k
endef
TARGET_DEVICES += hilink_hlk-7621a-evb
define Device/hiwifi_hc5962
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32768k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := HiWiFi
DEVICE_MODEL := HC5962
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += hiwifi_hc5962
define Device/humax_e10
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15936k
DEVICE_VENDOR := HUMAX
DEVICE_MODEL := E10
DEVICE_ALT0_VENDOR := HUMAX
DEVICE_ALT0_MODEL := QUANTUM E10
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | pad-rootfs | \
check-size | append-metadata
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | \
edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | \
check-size | zip upg -P f013c26cf0a320fb71d03356dcb6bb63
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += humax_e10
define Device/huasifei_ws1208v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WS1208V2
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
kmod-usb3 kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan \
kmod-usb-serial-option -uboot-envtools
endef
TARGET_DEVICES += huasifei_ws1208v2
define Device/iodata_wn-ax1167gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15552k
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AX1167GR
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
check-size 7680k | senao-header -r 0x30a -p 0x1055 -t 4
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-ax1167gr
define Device/iodata_nand
$(Device/nand)
DEVICE_VENDOR := I-O DATA
IMAGE_SIZE := 51200k
LOADER_TYPE := bin
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | lzma | uImage lzma
endef
# The OEM webinterface expects an kernel with initramfs which has the uImage
# header field ih_name.
# We don't want to set the header name field for the kernel include in the
# sysupgrade image as well, as this image shouldn't be accepted by the OEM
# webinterface. It will soft-brick the board.
define Device/iodata_wn-ax1167gr2
$(Device/iodata_nand)
DEVICE_MODEL := WN-AX1167GR2
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d42 -n '3.10(XBC.1)b10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-ax1167gr2
define Device/iodata_wn-ax2033gr
$(Device/iodata_nand)
DEVICE_MODEL := WN-AX2033GR
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d42 -n '3.10(VST.1)C10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-ax2033gr
define Device/iodata_wn-deax1800gr
$(Device/dsa-migration)
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-DEAX1800GR
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 47104k
UBINIZE_OPTS := -E 5
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
check-size | xor-image -p 29944a25120984c2 -x | \
iodata-mstc-header2 WN-DEAX1800GR 00021003
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += iodata_wn-deax1800gr
define Device/iodata_wn-dx1167r
$(Device/iodata_nand)
DEVICE_MODEL := WN-DX1167R
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d43 -n '3.10(XIK.1)b10' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-dx1167r
define Device/iodata_wn-dx1200gr
$(Device/iodata_nand)
DEVICE_MODEL := WN-DX1200GR
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d43 -n '3.10(XIQ.0)b20' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
endef
TARGET_DEVICES += iodata_wn-dx1200gr
define Device/iodata_wn-dx2033gr
$(Device/iodata_nand)
DEVICE_MODEL := WN-DX2033GR
KERNEL_INITRAMFS := $(KERNEL_DTB) | loader-kernel | lzma | \
uImage lzma -M 0x434f4d42 -n '3.10(XID.0)b30' | iodata-mstc-header
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-dx2033gr
define Device/iodata_wn-gx300gr
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7616k
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-GX300GR
DEVICE_PACKAGES := kmod-mt7603 -uboot-envtools
endef
TARGET_DEVICES += iodata_wn-gx300gr
define Device/iodata_wnpr2600g
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WNPR2600G
IMAGE_SIZE := 13952k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
elx-header 0104003a 8844A2D168B45A2D
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iodata_wnpr2600g
define Device/iptime_a3002mesh
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a3002me
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3002MESH
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += iptime_a3002mesh
define Device/iptime_a3004ns-dual
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a3004nd
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3004NS-dual
DEVICE_PACKAGES := kmod-usb3 kmod-mt76x2 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
TARGET_DEVICES += iptime_a3004ns-dual
define Device/iptime_a3004t
$(Device/nand)
$(Device/uimage-lzma-loader)
FILESYSTEMS := squashfs
IMAGE_SIZE := 129280k
UIMAGE_NAME := a3004t
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A3004T
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += iptime_a3004t
define Device/iptime_a6004ns-m
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a6004nm
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A6004NS-M
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += iptime_a6004ns-m
define Device/iptime_a6ns-m
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a6nm
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A6ns-M
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += iptime_a6ns-m
define Device/iptime_a8004t
$(Device/dsa-migration)
IMAGE_SIZE := 16128k
UIMAGE_NAME := a8004t
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := A8004T
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += iptime_a8004t
define Device/iptime_ax2004m
$(Device/nand)
IMAGE_SIZE := 121344k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
ARTIFACTS := initramfs-factory.bin
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
check-size | iptime-crc32 ax2004m
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := AX2004M
DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := NMBM has been newly enabled, and its flash block \
mapping might be incompatible with existing installation. \
New installation with factory image via recovery mode is recommended.
endef
TARGET_DEVICES += iptime_ax2004m
define Device/iptime_t5004
$(Device/nand)
IMAGE_SIZE := 129280k
UIMAGE_NAME := t5004
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := T5004
DEVICE_PACKAGES := -wpad-basic-mbedtls
endef
TARGET_DEVICES += iptime_t5004
define Device/jcg_jhr-ac876m
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 89.1
JCG_MAXSIZE := 16064k
DEVICE_VENDOR := JCG
DEVICE_MODEL := JHR-AC876M
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += jcg_jhr-ac876m
define Device/jcg_q20
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 91136k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := JCG
DEVICE_MODEL := Q20
DEVICE_PACKAGES := kmod-mt7915-firmware
endef
TARGET_DEVICES += jcg_q20
define Device/jcg_y2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | jcg-header 95.1
JCG_MAXSIZE := 16064k
DEVICE_VENDOR := JCG
DEVICE_MODEL := Y2
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += jcg_y2
define Device/keenetic_kn-3010
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 31488k
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3010
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to $$$$(BLOCKSIZE) | \
check-size | zyimage -d 0x803010 -v "KN-3010"
endef
TARGET_DEVICES += keenetic_kn-3010
define Device/lenovo_newifi-d1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Lenovo
DEVICE_MODEL := Newifi D1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += newifi-d1
endef
TARGET_DEVICES += lenovo_newifi-d1
define Device/linksys_e5600
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 26624k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E5600
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | gemtek-trailer
endef
TARGET_DEVICES += linksys_e5600
define Device/linksys_e7350
$(Device/belkin_rt1800)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E7350
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | belkin-header GOLF 1 9.9.9
endef
TARGET_DEVICES += linksys_e7350
define Device/linksys_ea7xxx
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 36864k
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615-firmware
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
endef
define Device/linksys_ea6350-v4
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA6350
DEVICE_VARIANT := v4
LINKSYS_HWNAME := EA6350
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7663-firmware-ap
endef
TARGET_DEVICES += linksys_ea6350-v4
define Device/linksys_ea7300-v1
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA7300
DEVICE_VARIANT := v1
LINKSYS_HWNAME := EA7300
endef
TARGET_DEVICES += linksys_ea7300-v1
define Device/linksys_ea7300-v2
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA7300
DEVICE_VARIANT := v2
LINKSYS_HWNAME := EA7300v2
DEVICE_PACKAGES += kmod-mt7603
endef
TARGET_DEVICES += linksys_ea7300-v2
define Device/linksys_ea7500-v2
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA7500
DEVICE_VARIANT := v2
LINKSYS_HWNAME := EA7500v2
endef
TARGET_DEVICES += linksys_ea7500-v2
define Device/linksys_ea8100-v1
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA8100
DEVICE_VARIANT := v1
LINKSYS_HWNAME := EA8100
endef
TARGET_DEVICES += linksys_ea8100-v1
define Device/linksys_ea8100-v2
$(Device/linksys_ea7xxx)
DEVICE_MODEL := EA8100
DEVICE_VARIANT := v2
LINKSYS_HWNAME := EA8100v2
endef
TARGET_DEVICES += linksys_ea8100-v2
define Device/linksys_re6500
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := RE6500
DEVICE_PACKAGES := kmod-mt76x2 -uboot-envtools
SUPPORTED_DEVICES += re6500
endef
TARGET_DEVICES += linksys_re6500
define Device/linksys_re7000
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Linksys
DEVICE_MODEL := RE7000
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware
endef
TARGET_DEVICES += linksys_re7000
define Device/mediatek_ap-mt7621a-v60
$(Device/dsa-migration)
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Mediatek
DEVICE_MODEL := AP-MT7621A-V60 EVB
DEVICE_PACKAGES := kmod-usb3 kmod-sdhci-mt7620 kmod-sound-mt7620 \
-wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += mediatek_ap-mt7621a-v60
define Device/mediatek_mt7621-eval-board
$(Device/dsa-migration)
IMAGE_SIZE := 15104k
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7621 EVB
DEVICE_PACKAGES := -wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += mt7621
endef
TARGET_DEVICES += mediatek_mt7621-eval-board
define Device/meig_slt866
$(Device/dsa-migration)
IMAGE_SIZE := 15104k
DEVICE_VENDOR := MeiG
DEVICE_MODEL := SLT866
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb3 \
kmod-usb-net-rndis
endef
TARGET_DEVICES += meig_slt866
define Device/mercusys_mr70x-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR70X
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := MR70X
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += mercusys_mr70x-v1
define Device/MikroTik
$(Device/dsa-migration)
DEVICE_VENDOR := MikroTik
IMAGE_SIZE := 16128k
DEVICE_PACKAGES := kmod-usb3 -uboot-envtools
KERNEL_NAME := vmlinuz
KERNEL := kernel-bin | append-dtb-elf
IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \
pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | \
append-metadata
endef
define Device/mikrotik_ltap-2hnd
$(Device/MikroTik)
DEVICE_MODEL := LtAP-2HnD
DEVICE_PACKAGES += kmod-ath9k kmod-pps-gpio rssileds
endef
TARGET_DEVICES += mikrotik_ltap-2hnd
define Device/mikrotik_routerboard-750gr3
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD 750Gr3
DEVICE_PACKAGES += -wpad-basic-mbedtls
SUPPORTED_DEVICES += mikrotik,rb750gr3
endef
TARGET_DEVICES += mikrotik_routerboard-750gr3
define Device/mikrotik_routerboard-760igs
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD 760iGS
DEVICE_PACKAGES += kmod-sfp -wpad-basic-mbedtls
endef
TARGET_DEVICES += mikrotik_routerboard-760igs
define Device/mikrotik_routerboard-m11g
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD M11G
DEVICE_PACKAGES := -wpad-basic-mbedtls
SUPPORTED_DEVICES += mikrotik,rbm11g
endef
TARGET_DEVICES += mikrotik_routerboard-m11g
define Device/mikrotik_routerboard-m33g
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD M33G
DEVICE_PACKAGES := -wpad-basic-mbedtls
SUPPORTED_DEVICES += mikrotik,rbm33g
endef
TARGET_DEVICES += mikrotik_routerboard-m33g
define Device/mqmaker_witi
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := MQmaker
DEVICE_MODEL := WiTi
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += witi mqmaker,witi-256m mqmaker,witi-512m
endef
TARGET_DEVICES += mqmaker_witi
define Device/mtc_wr1201
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16000k
DEVICE_VENDOR := MTC
DEVICE_MODEL := Wireless Router WR1201
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma -n 'WR1201_8_128'
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += mtc_wr1201
define Device/mts_wg430223
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := MTS
DEVICE_MODEL := WG430223
IMAGE_SIZE := 32768k
KERNEL_SIZE := 4352k
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none | arcadyan-trx 0x53485231 | pad-to $$(KERNEL_SIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.trx
IMAGE/factory.trx := append-kernel | append-ubi | check-size
DEVICE_PACKAGES := kmod-mt7615-firmware uencrypt-mbedtls
endef
TARGET_DEVICES += mts_wg430223
define Device/netgear_eax12
$(Device/nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EAX12
DEVICE_ALT0_VENDOR := NETGEAR
DEVICE_ALT0_MODEL := EAX11
DEVICE_ALT0_VARIANT := v2
DEVICE_ALT1_VENDOR := NETGEAR
DEVICE_ALT1_MODEL := EAX15
DEVICE_ALT1_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
NETGEAR_ENC_MODEL := EAX12
NETGEAR_ENC_REGION := US
NETGEAR_ENC_HW_ID_LIST := 1010000004540000_NETGEAR
NETGEAR_ENC_MODEL_LIST := EAX12;EAX11v2;EAX15v2
IMAGE_SIZE := 57344k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_eax12
define Device/netgear_ex6150
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EX6150
DEVICE_PACKAGES := kmod-mt76x2 -uboot-envtools
NETGEAR_BOARD_ID := U12H318T00_NETGEAR
IMAGE_SIZE := 14848k
IMAGES += factory.chk
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size | netgear-chk
endef
TARGET_DEVICES += netgear_ex6150
define Device/netgear_sercomm_nand
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGES += factory.img kernel.bin rootfs.bin
IMAGE/factory.img := pad-extra 2048k | append-kernel | pad-to 6144k | \
append-ubi | pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-ubi | check-size
DEVICE_VENDOR := NETGEAR
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
define Device/netgear_r6220
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6220
SERCOMM_HWNAME := R6220
SERCOMM_HWID := AYA
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0086
IMAGE_SIZE := 28672k
DEVICE_PACKAGES += kmod-mt76x2
SUPPORTED_DEVICES += r6220
endef
TARGET_DEVICES += netgear_r6220
define Device/netgear_r6260
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6260
SERCOMM_HWNAME := R6260
SERCOMM_HWID := CHJ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0052
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6260
define Device/netgear_r6350
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6350
SERCOMM_HWNAME := R6350
SERCOMM_HWID := CHJ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0052
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6350
define Device/netgear_r6700-v2
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6700
DEVICE_VARIANT := v2
DEVICE_ALT0_VENDOR := NETGEAR
DEVICE_ALT0_MODEL := Nighthawk AC2400
DEVICE_ALT0_VARIANT := v1
DEVICE_ALT1_VENDOR := NETGEAR
DEVICE_ALT1_MODEL := Nighthawk AC2100
DEVICE_ALT1_VARIANT := v1
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6700-v2
define Device/netgear_r6800
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6800
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0062
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6800
define Device/netgear_r6850
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6850
SERCOMM_HWNAME := R6850
SERCOMM_HWID := CHJ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0052
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6850
define Device/netgear_r6900-v2
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6900
DEVICE_VARIANT := v2
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r6900-v2
define Device/netgear_r7200
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R7200
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r7200
define Device/netgear_r7450
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R7450
SERCOMM_HWNAME := R6950
SERCOMM_HWID := BZV
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1032
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_r7450
define Device/netgear_wac104
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := WAC104
SERCOMM_HWNAME := WAC104
SERCOMM_HWID := CAY
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0006
IMAGE_SIZE := 28672k
DEVICE_PACKAGES += kmod-mt76x2
endef
TARGET_DEVICES += netgear_wac104
define Device/netgear_wac124
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := WAC124
SERCOMM_HWNAME := WAC124
SERCOMM_HWID := CTL
SERCOMM_HWVER := A003
SERCOMM_SWVER := 0x0402
IMAGE_SIZE := 40960k
DEVICE_PACKAGES += kmod-mt7615-firmware
endef
TARGET_DEVICES += netgear_wac124
define Device/netgear_wax202
$(Device/nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX202
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
NETGEAR_ENC_MODEL := WAX202
NETGEAR_ENC_REGION := US
IMAGE_SIZE := 38912k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_wax202
define Device/netgear_wndr3700-v5
$(Device/dsa-migration)
$(Device/netgear_sercomm_nor)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15232k
DEVICE_MODEL := WNDR3700
DEVICE_VARIANT := v5
SERCOMM_HWNAME := WNDR3700v5
SERCOMM_HWID := AYB
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x1054
SERCOMM_PAD := 320k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += wndr3700v5
endef
TARGET_DEVICES += netgear_wndr3700-v5
define Device/netis_wf2881
$(Device/nand)
$(Device/uimage-lzma-loader)
FILESYSTEMS := squashfs
IMAGE_SIZE := 129280k
UIMAGE_NAME := WF2881_0.0.00
KERNEL_INITRAMFS := $$(KERNEL) | netis-tail WF2881
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_VENDOR := NETIS
DEVICE_MODEL := WF2881
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
TARGET_DEVICES += netis_wf2881
define Device/oraybox_x3a
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15360k
DEVICE_VENDOR := OrayBox
DEVICE_MODEL := X3A
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += oraybox_x3a
define Device/phicomm_k2p
$(Device/dsa-migration)
IMAGE_SIZE := 15744k
DEVICE_VENDOR := Phicomm
DEVICE_MODEL := K2P
DEVICE_ALT0_VENDOR := Phicomm
DEVICE_ALT0_MODEL := KE 2P
SUPPORTED_DEVICES += k2p
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += phicomm_k2p
define Device/planex_vr500
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 65216k
DEVICE_VENDOR := Planex
DEVICE_MODEL := VR500
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += vr500
endef
TARGET_DEVICES += planex_vr500
define Device/raisecom_msg1500-x-00
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 129280k
DEVICE_VENDOR := RAISECOM
DEVICE_MODEL := MSG1500
DEVICE_VARIANT := X.00
DEVICE_ALT0_VENDOR := Nokia
DEVICE_ALT0_MODEL := A-040W-Q
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += raisecom_msg1500-x-00
define Device/renkforce_ws-wn530hp3-a
$(Device/dsa-migration)
DEVICE_VENDOR := Renkforce
DEVICE_MODEL := WS-WN530HP3-A
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
IMAGE/sysupgrade.bin := append-kernel | pad-to 65536 | append-rootfs | \
check-size | append-metadata
IMAGE_SIZE := 15040k
endef
TARGET_DEVICES += renkforce_ws-wn530hp3-a
define Device/rostelecom_rt-fe-1a
$(Device/sercomm_dxx)
IMAGE_SIZE := 24576k
SERCOMM_HWID := CX4
SERCOMM_HWVER := 11300
SERCOMM_SWVER := 2010
DEVICE_VENDOR := Rostelecom
DEVICE_MODEL := RT-FE-1A
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := RT-FE-1A
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware
endef
TARGET_DEVICES += rostelecom_rt-fe-1a
define Device/rostelecom_rt-sf-1
$(Device/sercomm_dxx)
IMAGE_SIZE := 32768k
SERCOMM_HWID := DKG
SERCOMM_HWVER := 10110
SERCOMM_SWVER := 1026
DEVICE_VENDOR := Rostelecom
DEVICE_MODEL := RT-SF-1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3
endef
TARGET_DEVICES += rostelecom_rt-sf-1
define Device/samknows_whitebox-v8
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := SamKnows
DEVICE_MODEL := Whitebox 8
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += sk-wb8
endef
TARGET_DEVICES += samknows_whitebox-v8
define Device/sercomm_na502
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 20480k
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += sercomm_na502
define Device/sercomm_na502s
$(Device/nand)
IMAGE_SIZE := 20971520
DEVICE_VENDOR := SERCOMM
DEVICE_MODEL := NA502S
DEVICE_PACKAGES := kmod-mt76x2 kmod-mt7603 kmod-usb3 kmod-usb-serial \
kmod-usb-serial-xr_usb_serial_common -uboot-envtools
endef
TARGET_DEVICES += sercomm_na502s
define Device/sim_simax1800t
$(Device/haier-sim_wr1800k)
DEVICE_VENDOR := SIM
DEVICE_MODEL := SIMAX1800T
endef
TARGET_DEVICES += sim_simax1800t
define Device/snr_snr-cpe-me1
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15040k
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-ME1
UIMAGE_NAME := SNR-CPE-ME1-5GHZ-MT
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x0e kmod-usb3 \
kmod-usb-ledtrig-usbport uboot-envtools
endef
TARGET_DEVICES += snr_snr-cpe-me1
define Device/snr_snr-cpe-me2-lite
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-ME2-Lite
UIMAGE_NAME := $$(DEVICE_MODEL)
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
endef
TARGET_DEVICES += snr_snr-cpe-me2-lite
define Device/snr_snr-cpe-me2-sfp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := SNR
DEVICE_MODEL := SNR-CPE-ME2-SFP
UIMAGE_NAME := $$(DEVICE_MODEL)
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 \
kmod-sfp kmod-usb-ledtrig-usbport uboot-envtools
endef
TARGET_DEVICES += snr_snr-cpe-me2-sfp
define Device/storylink_sap-g3200u3
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7872k
UIMAGE_NAME := SAP-G3200
DEVICE_VENDOR := STORYLiNK
DEVICE_MODEL := SAP-G3200U3
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
SUPPORTED_DEVICES += sap-g3200u3
endef
TARGET_DEVICES += storylink_sap-g3200u3
define Device/telco-electronics_x1
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Telco Electronics
DEVICE_MODEL := X1
DEVICE_PACKAGES := kmod-usb3 kmod-mt7603 kmod-mt76x2 -uboot-envtools
endef
TARGET_DEVICES += telco-electronics_x1
define Device/tenbay_t-mb5eu-v01
$(Device/dsa-migration)
DEVICE_VENDOR := Tenbay
DEVICE_MODEL := T-MB5EU-V01
DEVICE_DTS_CONFIG := config@1
DEVICE_PACKAGES += kmod-mt7915-firmware kmod-usb3 -uboot-envtools
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 15808k
SUPPORTED_DEVICES += mt7621-dm2-t-mb5eu-v01-nor
endef
TARGET_DEVICES += tenbay_t-mb5eu-v01
define Device/thunder_timecloud
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Thunder
DEVICE_MODEL := Timecloud
DEVICE_PACKAGES := kmod-usb3 -wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += timecloud
endef
TARGET_DEVICES += thunder_timecloud
define Device/totolink_a7000r
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
UIMAGE_NAME := C8340R1C-9999
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := A7000R
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += totolink_a7000r
define Device/totolink_x5000r
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
UIMAGE_NAME := C8343R-9999
DEVICE_VENDOR := TOTOLINK
DEVICE_MODEL := X5000R
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += totolink_x5000r
define Device/tozed_zlt-s12-pro
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := TOZED
DEVICE_MODEL := ZLT S12 PRO
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 comgt-ncm -uboot-envtools
endef
TARGET_DEVICES += tozed_zlt-s12-pro
define Device/tplink_archer-ax23-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer AX23
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := ARCHER-AX23-V1
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-ax23-v1
define Device/tplink_archer-a6-v3
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer A6
DEVICE_VARIANT := V3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e \
kmod-mt7663-firmware-ap -uboot-envtools
TPLINK_BOARD_ID := ARCHER-A6-V3
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-a6-v3
define Device/tplink_archer-c6-v3
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer C6
DEVICE_VARIANT := V3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
TPLINK_BOARD_ID := ARCHER-C6-V3
KERNEL := $(KERNEL_DTB) | uImage lzma
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-c6-v3
define Device/tplink_archer-c6u-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Archer C6U
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
KERNEL := $(KERNEL_DTB) | uImage lzma
TPLINK_BOARD_ID := ARCHER-C6U-V1
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_archer-c6u-v1
define Device/tplink_deco-m4r-v4
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := Deco M4R
DEVICE_VARIANT := v4
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
KERNEL := $(KERNEL_DTB) | uImage lzma
TPLINK_BOARD_ID := DECO-M4R-V4
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_deco-m4r-v4
define Device/tplink_eap235-wall-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := EAP235-Wall
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
TPLINK_BOARD_ID := EAP235-WALL-V1
IMAGE_SIZE := 13440k
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory | \
pad-extra 128
endef
TARGET_DEVICES += tplink_eap235-wall-v1
define Device/tplink_eap613-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := EAP613
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := EAP610-V3
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | pad-to 64k
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
IMAGE_SIZE := 13248k
endef
TARGET_DEVICES += tplink_eap613-v1
define Device/tplink_eap615-wall-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := EAP615-Wall
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := EAP615-WALL-V1
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | pad-to 64k
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
IMAGE_SIZE := 13248k
endef
TARGET_DEVICES += tplink_eap615-wall-v1
define Device/tplink_ec330-g5u-v1
$(Device/nand)
LOADER := bin
IMAGE_SIZE := 49152k
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := EC330-G5u
DEVICE_ALT0_VENDOR := TP-Link
DEVICE_ALT0_MODEL := Archer C9ERT
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb-ledtrig-usbport kmod-usb3
KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage-tplink-c9 standalone '$(call toupper,$(LINUX_KARCH)) \
$(VERSION_DIST) Linux-$(LINUX_VERSION)' | \
uImage-tplink-c9 firmware 'OS IMAGE ($(VERSION_DIST))'
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
uImage none
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size
endef
TARGET_DEVICES += tplink_ec330-g5u-v1
define Device/tplink_er605-v2
$(Device/nand)
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := ER605
DEVICE_VARIANT := v2
DEVICE_PACKAGES := -wpad-basic-mbedtls kmod-usb3 -uboot-envtools
KERNEL_IN_UBI := 1
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += sysupgrade.tar
IMAGE_SIZE := 127744k
endef
TARGET_DEVICES += tplink_er605-v2
define Device/tplink_ex220-v1
$(Device/dsa-migration)
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := EX220
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
TPLINK_BOARD_ID := EX220-V1
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 15744k
endef
TARGET_DEVICES += tplink_ex220-v1
define Device/tplink_mr600-v2-eu
$(Device/dsa-migration)
$(Device/tplink-v2)
DEVICE_MODEL := MR600
DEVICE_VARIANT := v2 (EU)
TPLINK_FLASHLAYOUT := 16Mltq
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb-net-qmi-wwan uqmi kmod-usb3 -uboot-envtools
IMAGE/factory.bin := tplink-v2-image -e -a 0x10000
IMAGE/sysupgrade.bin := tplink-v2-image -s -e -a 0x10000 | check-size | \
append-metadata
KERNEL := $(KERNEL_DTB) | uImage lzma
KERNEL_INITRAMFS := $$(KERNEL) | tplink-v2-header
TPLINK_BOARD_ID := MR600-V2-EU
IMAGE_SIZE := 16384k
endef
TARGET_DEVICES += tplink_mr600-v2-eu
define Device/tplink_re350-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE350
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
TPLINK_BOARD_ID := RE350-V1
IMAGE_SIZE := 6016k
SUPPORTED_DEVICES += re350-v1
endef
TARGET_DEVICES += tplink_re350-v1
define Device/tplink_re500-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE500
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
TPLINK_BOARD_ID := RE500-V1
IMAGE_SIZE := 14208k
endef
TARGET_DEVICES += tplink_re500-v1
define Device/tplink_re650-v1
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE650
DEVICE_VARIANT := v1
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
TPLINK_BOARD_ID := RE650-V1
IMAGE_SIZE := 14208k
endef
TARGET_DEVICES += tplink_re650-v1
define Device/tplink_re650-v2
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := RE650
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7615-firmware -uboot-envtools
TPLINK_BOARD_ID := RE650-V2
IMAGE_SIZE := 7994k
endef
TARGET_DEVICES += tplink_re650-v2
define Device/tplink_tl-wpa8631p-v3
$(Device/dsa-migration)
$(Device/tplink-safeloader)
DEVICE_MODEL := TL-WPA8631P
DEVICE_VARIANT := v3
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
TPLINK_BOARD_ID := TL-WPA8631P-V3
IMAGE_SIZE := 7232k
endef
TARGET_DEVICES += tplink_tl-wpa8631p-v3
define Device/ubnt_edgerouter_common
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Ubiquiti
IMAGE_SIZE := 256768k
FILESYSTEMS := squashfs
KERNEL_SIZE := 3145728
KERNEL_INITRAMFS := $$(KERNEL) | \
ubnt-erx-factory-image $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.tar
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES += -wpad-basic-mbedtls -uboot-envtools
endef
define Device/ubnt_edgerouter-x
$(Device/ubnt_edgerouter_common)
DEVICE_MODEL := EdgeRouter X
SUPPORTED_DEVICES += ubnt-erx ubiquiti,edgerouterx
endef
TARGET_DEVICES += ubnt_edgerouter-x
define Device/ubnt_edgerouter-x-sfp
$(Device/ubnt_edgerouter_common)
DEVICE_MODEL := EdgeRouter X SFP
DEVICE_ALT0_VENDOR := Ubiquiti
DEVICE_ALT0_MODEL := EdgePoint R6
DEVICE_PACKAGES += kmod-i2c-algo-pca kmod-gpio-pca953x kmod-sfp
SUPPORTED_DEVICES += ubnt-erx-sfp ubiquiti,edgerouterx-sfp
endef
TARGET_DEVICES += ubnt_edgerouter-x-sfp
define Device/ubnt_unifi-6-lite
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi 6 Lite
DEVICE_DTS_CONFIG := config@1
DEVICE_DTS_LOADADDR := 0x87000000
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7915-firmware -uboot-envtools
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 15424k
endef
TARGET_DEVICES += ubnt_unifi-6-lite
define Device/ubnt_unifi-flexhd
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi FlexHD
DEVICE_DTS_CONFIG := config@2
DEVICE_DTS_LOADADDR := 0x87000000
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware kmod-leds-ubnt-ledbar \
-uboot-envtools
IMAGE_SIZE := 15552k
endef
TARGET_DEVICES += ubnt_unifi-flexhd
define Device/ubnt_unifi-nanohd
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi nanoHD
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
IMAGE_SIZE := 15552k
endef
TARGET_DEVICES += ubnt_unifi-nanohd
define Device/ubnt_usw-flex
$(Device/dsa-migration)
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi Switch Flex
DEVICE_DTS_CONFIG := config@1
DEVICE_DTS_LOADADDR := 0x87000000
DEVICE_PACKAGES += -uboot-envtools
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE_SIZE := 14720k
endef
TARGET_DEVICES += ubnt_usw-flex
define Device/unielec_u7621-01-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-01
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 -uboot-envtools
endef
TARGET_DEVICES += unielec_u7621-01-16m
define Device/unielec_u7621-06-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += u7621-06-256M-16M unielec,u7621-06-256m-16m
endef
TARGET_DEVICES += unielec_u7621-06-16m
define Device/unielec_u7621-06-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += unielec,u7621-06-32m
endef
TARGET_DEVICES += unielec_u7621-06-32m
define Device/unielec_u7621-06-64m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 65216k
DEVICE_VENDOR := UniElec
DEVICE_MODEL := U7621-06
DEVICE_VARIANT := 64M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 \
-wpad-basic-mbedtls -uboot-envtools
SUPPORTED_DEVICES += unielec,u7621-06-512m-64m
endef
TARGET_DEVICES += unielec_u7621-06-64m
define Device/wavlink_wl-wn531a6
$(Device/dsa-migration)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN531A6
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 -uboot-envtools
IMAGE_SIZE := 15040k
endef
TARGET_DEVICES += wavlink_wl-wn531a6
define Device/wavlink_wl-wn533a8
$(Device/dsa-migration)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN533A8
KERNEL_INITRAMFS_SUFFIX := -WN533A8$$(KERNEL_SUFFIX)
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 -uboot-envtools
IMAGE_SIZE := 15040k
endef
TARGET_DEVICES += wavlink_wl-wn533a8
define Device/wavlink_ws-wn572hp3-4g
$(Device/dsa-migration)
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WS-WN572HP3
DEVICE_VARIANT := 4G
IMAGE_SIZE := 15040k
KERNEL_LOADADDR := 0x82000000
KERNEL := kernel-bin | relocate-kernel $(loadaddr-y) | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
kmod-usb3 kmod-usb-net-rndis comgt-ncm -uboot-envtools
endef
TARGET_DEVICES += wavlink_ws-wn572hp3-4g
define Device/wavlink_wl-wn573hx1
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := Wavlink
DEVICE_MODEL := WL-WN573HX1
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
endef
TARGET_DEVICES += wavlink_wl-wn573hx1
define Device/wevo_11acnas
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
UIMAGE_NAME := 11AC-NAS-Router(0.0.0)
DEVICE_VENDOR := WeVO
DEVICE_MODEL := 11AC NAS Router
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += 11acnas
endef
TARGET_DEVICES += wevo_11acnas
define Device/wevo_w2914ns-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
UIMAGE_NAME := W2914NS-V2(0.0.0)
DEVICE_VENDOR := WeVO
DEVICE_MODEL := W2914NS
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += w2914nsv2
endef
TARGET_DEVICES += wevo_w2914ns-v2
define Device/wifire_s1500-nbn
$(Device/sercomm_s1500)
DEVICE_VENDOR := WiFire
DEVICE_MODEL := S1500.NBN
DEVICE_ALT0_VENDOR := Sercomm
DEVICE_ALT0_MODEL := S1500 BUC
IMAGE_SIZE := 51200k
IMAGE/factory.img := append-kernel | sercomm-kernel-factory | \
sercomm-reset-slot1-chksum | append-ubi | check-size | \
sercomm-factory-cqr | sercomm-pid-setbit 0x13 | sercomm-mkhash | \
sercomm-crypto
SERCOMM_HWID := BUC
SERCOMM_HWVER := 10000
SERCOMM_ROOTFS2_OFFSET := 0x4d00000
SERCOMM_SWVER := 2015
endef
TARGET_DEVICES += wifire_s1500-nbn
define Device/winstars_ws-wn583a6
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 7872k
DEVICE_VENDOR := Winstars
DEVICE_MODEL := WS-WN583A6
DEVICE_ALT0_VENDOR := Gemeita
DEVICE_ALT0_MODEL := AC2100
KERNEL_INITRAMFS_SUFFIX := -WN583A6$$(KERNEL_SUFFIX)
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += winstars_ws-wn583a6
define Device/xiaomi_nand_separate
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
IMAGES += kernel1.bin rootfs0.bin
IMAGE/kernel1.bin := append-kernel
IMAGE/rootfs0.bin := append-ubi | check-size
endef
define Device/xiaomi_mi-router-3g
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Mi Router 3G
IMAGE_SIZE := 124416k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += R3G mir3g xiaomi,mir3g
endef
TARGET_DEVICES += xiaomi_mi-router-3g
define Device/xiaomi_mi-router-3g-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 14848k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 3G
DEVICE_VARIANT := v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
SUPPORTED_DEVICES += xiaomi,mir3g-v2
endef
TARGET_DEVICES += xiaomi_mi-router-3g-v2
define Device/xiaomi_mi-router-3-pro
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 255488k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 3 Pro
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport
SUPPORTED_DEVICES += xiaomi,mir3p
endef
TARGET_DEVICES += xiaomi_mi-router-3-pro
define Device/xiaomi_mi-router-4
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Mi Router 4
IMAGE_SIZE := 124416k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2
endef
TARGET_DEVICES += xiaomi_mi-router-4
define Device/xiaomi_mi-router-4a-gigabit
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 14848k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := Gigabit Edition
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 -uboot-envtools
endef
TARGET_DEVICES += xiaomi_mi-router-4a-gigabit
define Device/xiaomi_mi-router-4a-gigabit-v2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 14784k
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4A
DEVICE_VARIANT := Gigabit Edition v2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
-uboot-envtools
endef
TARGET_DEVICES += xiaomi_mi-router-4a-gigabit-v2
define Device/xiaomi_mi-router-ac2100
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Mi Router AC2100
IMAGE_SIZE := 120320k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware -uboot-envtools
endef
TARGET_DEVICES += xiaomi_mi-router-ac2100
define Device/xiaomi_mi-router-cr660x
$(Device/nand)
$(Device/uimage-lzma-loader)
DEVICE_VENDOR := Xiaomi
IMAGE_SIZE := 128512k
IMAGES += firmware.bin
IMAGE/firmware.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
check-size
DEVICE_PACKAGES += kmod-mt7915-firmware
endef
define Device/xiaomi_mi-router-cr6606
$(Device/xiaomi_mi-router-cr660x)
DEVICE_MODEL := Mi Router CR6606
endef
TARGET_DEVICES += xiaomi_mi-router-cr6606
define Device/xiaomi_mi-router-cr6608
$(Device/xiaomi_mi-router-cr660x)
DEVICE_MODEL := Mi Router CR6608
endef
TARGET_DEVICES += xiaomi_mi-router-cr6608
define Device/xiaomi_mi-router-cr6609
$(Device/xiaomi_mi-router-cr660x)
DEVICE_MODEL := Mi Router CR6609
endef
TARGET_DEVICES += xiaomi_mi-router-cr6609
define Device/xiaomi_redmi-router-ac2100
$(Device/xiaomi_nand_separate)
DEVICE_MODEL := Redmi Router AC2100
IMAGE_SIZE := 120320k
DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615-firmware
endef
TARGET_DEVICES += xiaomi_redmi-router-ac2100
define Device/xiaoyu_xy-c5
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := XiaoYu
DEVICE_MODEL := XY-C5
DEVICE_PACKAGES := kmod-ata-ahci kmod-usb3 -wpad-basic-mbedtls \
-uboot-envtools
endef
TARGET_DEVICES += xiaoyu_xy-c5
define Device/xzwifi_creativebox-v1
$(Device/dsa-migration)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := CreativeBox
DEVICE_MODEL := v1
DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
kmod-usb3 -wpad-basic-mbedtls -uboot-envtools
endef
TARGET_DEVICES += xzwifi_creativebox-v1
define Device/youhua_wr1200js
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := YouHua
DEVICE_MODEL := WR1200JS
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += youhua_wr1200js
define Device/youku_yk-l2
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Youku
DEVICE_MODEL := YK-L2
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
UIMAGE_MAGIC := 0x12291000
UIMAGE_NAME := 400000000000000000003000
endef
TARGET_DEVICES += youku_yk-l2
define Device/yuncore_ax820
$(Device/dsa-migration)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := YunCore
DEVICE_MODEL := AX820
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += yuncore_ax820
define Device/yuncore_fap640
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := YunCore
DEVICE_MODEL := FAP640
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += yuncore_fap640
define Device/yuncore_fap690
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 15808k
DEVICE_VENDOR := YunCore
DEVICE_MODEL := FAP690
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
endef
TARGET_DEVICES += yuncore_fap690
define Device/zbtlink_zbt-we1326
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE1326
DEVICE_ALT0_VENDOR := Wiflyer
DEVICE_ALT0_MODEL := WF3526-P
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-sdhci-mt7620 \
-uboot-envtools
SUPPORTED_DEVICES += zbt-we1326
endef
TARGET_DEVICES += zbtlink_zbt-we1326
define Device/zbtlink_zbt-we3526
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WE3526
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-we3526
define Device/zbtlink_zbt-wg1602-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1602
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1602-16m
define Device/zbtlink_zbt-wg1602-v04-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1602-V04
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1602-v04-16m
define Device/zbtlink_zbt-wg1602-v04-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32128k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1602-V04
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1602-v04-32m
define Device/zbtlink_zbt-wg1608-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1608
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport \
-uboot-envtools
endef
TARGET_DEVICES += zbtlink_zbt-wg1608-16m
define Device/zbtlink_zbt-wg1608-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG1608
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-sdhci-mt7620 kmod-mt7603 kmod-mt7615e \
kmod-mt7663-firmware-ap kmod-usb3 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += zbtlink_zbt-wg1608-32m
define Device/zbtlink_zbt-wg2626
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG2626
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += zbt-wg2626
endef
TARGET_DEVICES += zbtlink_zbt-wg2626
define Device/zbtlink_zbt-wg3526-16m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG3526
DEVICE_VARIANT := 16M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += zbt-wg3526 zbt-wg3526-16M
endef
TARGET_DEVICES += zbtlink_zbt-wg3526-16m
define Device/zbtlink_zbt-wg3526-32m
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-WG3526
DEVICE_VARIANT := 32M
DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-mt7603 kmod-mt76x2 \
kmod-usb3 kmod-usb-ledtrig-usbport -uboot-envtools
SUPPORTED_DEVICES += ac1200pro zbt-wg3526-32M
endef
TARGET_DEVICES += zbtlink_zbt-wg3526-32m
define Device/zio_freezio
$(Device/dsa-migration)
IMAGE_SIZE := 16064k
DEVICE_VENDOR := ZIO
DEVICE_MODEL := FREEZIO
DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 kmod-usb3 \
kmod-usb-ledtrig-usbport -uboot-envtools
endef
TARGET_DEVICES += zio_freezio
define Device/zyxel_lte3301-plus
$(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := LTE3301-PLUS
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 kmod-usb-ledtrig-usbport \
kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
endef
TARGET_DEVICES += zyxel_lte3301-plus
define Device/zyxel_lte5398-m904
$(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := LTE5398-M904
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 uqmi \
kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb-ledtrig-usbport
KERNEL := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | \
zytrx-header $$(DEVICE_MODEL) 9.99(ABQU.1)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
endef
TARGET_DEVICES += zyxel_lte5398-m904
define Device/zyxel_nr7101
$(Device/nand)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NR7101
KERNEL_SIZE := 31488k
DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
KERNEL := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION)
KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) 9.99(ABUV.9)$$(VERSION_DIST)-recovery
KERNEL_INITRAMFS_SUFFIX := -recovery.bin
endef
TARGET_DEVICES += zyxel_nr7101
define Device/zyxel_nwa-ax
$(Device/nand)
DEVICE_VENDOR := ZyXEL
KERNEL_SIZE := 8192k
DEVICE_PACKAGES := kmod-mt7915-firmware zyxel-bootconfig
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
IMAGES += factory.bin ramboot-factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | zyxel-nwa-fit
IMAGE/ramboot-factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
endef
define Device/zyxel_nwa50ax
$(Device/zyxel_nwa-ax)
DEVICE_MODEL := NWA50AX
endef
TARGET_DEVICES += zyxel_nwa50ax
define Device/zyxel_nwa55axe
$(Device/zyxel_nwa-ax)
DEVICE_MODEL := NWA55AXE
endef
TARGET_DEVICES += zyxel_nwa55axe
define Device/zyxel_wap6805
$(Device/nand)
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WAP6805
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7621-qtn-rgmii -uboot-envtools
KERNEL := $$(KERNEL/lzma-loader) | uImage none | uimage-padhdr 160
endef
TARGET_DEVICES += zyxel_wap6805
define Device/zyxel_wsm20
$(Device/nand)
KERNEL_SIZE := 8192k
IMAGE_SIZE := 41943040
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WSM20
DEVICE_PACKAGES := kmod-mt7915-firmware
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | znet-header V1.00(ABZF.0)C0
endef
TARGET_DEVICES += zyxel_wsm20
Reference in New Issue View Git Blame Copy Permalink